1. შესავალი
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Salus RT310i Smart Thermostat. Please read this manual carefully before installation and use to ensure safe and efficient operation.
The Salus RT310i is a wireless, internet-controlled thermostat designed to provide precise temperature control for your heating system, offering convenience and energy efficiency through remote access via a smartphone application.
2. უსაფრთხოების ინფორმაცია
მნიშვნელოვანია: Installation should only be carried out by a qualified electrician or competent person. Always isolate the mains supply before commencing any electrical work.
- დარწმუნდით, რომ ელექტრომომარაგება გათიშულია ინსტალაციამდე ან მოვლა-პატრონობამდე.
- არ დაუშვათ მოწყობილობა ტენიანობის ან ექსტრემალურ ტემპერატურაზე.
- შეინახეთ ბავშვებისთვის მიუწვდომელ ადგილას.
- Follow all local regulations and safety standards during installation.
3. პაკეტის შიგთავსი
დარწმუნდით, რომ ყველა კომპონენტი შეფუთვაშია:
- RT310i Thermostat
- RT310i Receiver
- Internet Gateway (iTG500)
- USB Power Cable and Adapter
- Ethernet კაბელი
- სამონტაჟო ხრახნები და კედლის შტეფსელები
- სწრაფი დაწყების სახელმძღვანელო
4. დაყენება
4.1. მიმღების ინსტალაცია
The receiver connects directly to your boiler or heating system. It should be installed in a dry, accessible location, away from metal objects that could interfere with the wireless signal.
- Isolate Power: Turn off the mains power supply to your heating system at the consumer unit.
- Mount Receiver: Use the provided screws and wall plugs to securely mount the receiver to a wall.
- გაყვანილობა: Connect the receiver to your boiler according to the wiring diagram provided in the Quick Start Guide. Typically, this involves Live, Neutral, and Switched Live connections. Consult a qualified electrician if you are unsure about wiring.
- ენერგიის აღდგენა: Once wiring is complete and secure, restore the mains power supply. The receiver's LED indicators should illuminate.
No product images were provided for this section. An image showing the receiver's wiring terminals and typical boiler connections would be beneficial here.
4.2. თერმოსტატის განთავსება
The RT310i thermostat is wireless and can be placed anywhere in your living space. For optimal performance, consider the following:
- Place it in a main living area, away from direct sunlight, drafts, or heat sources (e.g., radiators, TVs).
- Ensure it is at a height of approximately 1.5 meters from the floor.
- Avoid placing it behind curtains or furniture.
No product images were provided for this section. An image illustrating ideal thermostat placement in a room would enhance clarity.
4.3. Internet Gateway (iTG500) Setup
The iTG500 gateway connects your thermostat to the internet, allowing remote control.
- დაკავშირება ძალა: Plug the USB power cable into the iTG500 gateway and then into the power adapter. Plug the adapter into a wall socket.
- როუტერთან დაკავშირება: Use the provided Ethernet cable to connect the iTG500 gateway to an available LAN port on your internet router.
- შეამოწმეთ LED-ები: Once powered, the gateway's LEDs should indicate a successful connection to both power and the internet. Refer to the gateway's specific manual for LED status meanings.
No product images were provided for this section. An image showing the iTG500 gateway connected to a router and power would be helpful.
4.4. მოწყობილობების დაწყვილება
The thermostat, receiver, and gateway need to be paired to communicate.
- Receiver Pairing Mode: Press and hold the pairing button on the receiver until its LED starts flashing.
- Thermostat Pairing Mode: On the RT310i thermostat, navigate to the pairing menu (refer to the Quick Start Guide for specific button presses).
- Gateway Pairing: Open the Salus Smart Home app on your smartphone. Follow the in-app instructions to add a new device and pair the gateway. The app will guide you through connecting the thermostat and receiver to the gateway.
- დადასტურება: Once successfully paired, the LEDs on the receiver and gateway will indicate a stable connection, and the thermostat will display the current temperature.
No product images were provided for this section. Images showing the pairing buttons on the receiver and thermostat, and screenshots of the app pairing process, would be beneficial.
4.5. აპლიკაციის ინსტალაცია და ანგარიშის შექმნა
To control your RT310i remotely, download the Salus Smart Home app.
- Download the "Salus Smart Home" app from the Apple App Store or Google Play Store.
- Create a new user account or log in if you already have one.
- Follow the in-app instructions to add your RT310i system.
No product images were provided for this section. Screenshots of the app store pages and the app's initial setup screens would be useful.
5. საოპერაციო ინსტრუქციები
5.1. Manual Control (Thermostat)
You can adjust the temperature directly on the RT310i thermostat.
- ტემპერატურის დაყენება: Use the UP/DOWN buttons to adjust the desired temperature. The new setpoint will be displayed.
- დროებითი უგულებელყოფა: If a schedule is active, manually changing the temperature will temporarily override the schedule until the next scheduled event.
- რეჟიმის შერჩევა: Some models may have a mode button to switch between Heat, Cool (if applicable), and Off modes.
No product images were provided for this section. An image of the thermostat's display and buttons would be helpful.
5.2. აპლიკაციის კონტროლი
The Salus Smart Home app provides full control and scheduling capabilities.
- ამჟამინდელი სტატუსი: View the current room temperature and setpoint.
- ტემპერატურის დარეგულირება: Drag the temperature dial or use +/- buttons to change the setpoint.
- განრიგი: Create and modify heating schedules for different days and times.
- რეჟიმები: Switch between various operating modes (e.g., Auto, Manual, Holiday, Frost Protection).
- გეოფენინგი: Set up geofencing to automatically adjust heating based on your proximity to home.
No product images were provided for this section. Screenshots of the app's main control screen and scheduling interface would be highly beneficial.
5.3. დაგეგმვა
Program your heating schedule for optimal comfort and energy savings.
- Open the Salus Smart Home app and select your RT310i thermostat.
- Navigate to the "Schedule" or "Program" section.
- Choose the day(s) you wish to program.
- Set time periods and corresponding desired temperatures. You can typically set multiple events per day (e.g., morning, day, evening, night).
- შეინახეთ ცვლილებები.
No product images were provided for this section. Screenshots of the app's scheduling interface would be very useful.
6. მოვლა
The Salus RT310i thermostat requires minimal maintenance to ensure continued optimal performance.
- დასუფთავება: თერმოსტატისა და მიმღების ზედაპირები რბილი, მშრალი ქსოვილით გაწმინდეთ. არ გამოიყენოთ აბრაზიული საწმენდები ან გამხსნელები.
- Battery Replacement (Thermostat): The thermostat is typically powered by AA batteries. When the low battery indicator appears on the display, replace the batteries with new alkaline batteries. Ensure correct polarity.
- Firmware განახლებები: The gateway and thermostat firmware may be updated automatically via the internet. Ensure your gateway remains connected to the internet for these updates.
No product images were provided for this section. An image showing how to open the thermostat to replace batteries would be helpful.
7. Დიაგნოსტიკა
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| No display on thermostat | მკვდარი ბატარეები | შეცვალეთ ბატარეები ახლით. |
| გათბობა არ ირთვება |
|
|
| Cannot control via app |
|
|
| ტემპერატურის არასწორი ჩვენება | Thermostat placed in an unsuitable location (e.g., near heat source, draft). | Relocate the thermostat to a more central and stable temperature area (see Section 4.2). |
No product images or videos were provided for this section. A video demonstrating common troubleshooting steps, such as re-pairing, would be highly beneficial.
8. სპეციფიკაციები
| ფუნქცია | დეტალი |
|---|---|
| Power Supply (Thermostat) | 2 x AA ტუტე ბატარეა |
| კვების წყარო (მიმღები) | 230 ვ AC 50 ჰერცი |
| Power Supply (Gateway) | 5V DC (via USB adapter) |
| Max Load (Receiver) | 16 (5) ა |
| ტემპერატურის დიაპაზონი | 5°C - 35°C |
| კონტროლის ალგორითმი | ITLC (Internal Temperature Load Compensation) |
| კომუნიკაცია | 868 MHz (Thermostat to Receiver), Ethernet (Gateway to Router) |
| აპების თავსებადობა | Salus Smart Home (iOS & Android) |
9. ინფორმაცია გარანტიის შესახებ
Salus Controls provides a 5-year warranty from the date of purchase against defects in materials or workmanship. This warranty does not cover damage caused by improper installation, misuse, or normal wear and tear. Proof of purchase is required for all warranty claims.
For full terms and conditions, please refer to the official Salus Controls webსაიტი ან დაუკავშირდით მომხმარებელთა მხარდაჭერას.
10. მომხმარებელთა მხარდაჭერა
If you encounter any issues or have questions regarding your Salus RT310i Smart Thermostat, please contact Salus Controls customer support:
- Webსაიტი: www.salus-controls.com
- ელფოსტა: იხილეთ webსაიტი რეგიონალური მხარდაჭერის ელექტრონული ფოსტის მისამართებისთვის.
- ტელეფონი: იხილეთ website for regional support phone numbers.
Please have your product model (RT310i) and serial number (if applicable) ready when contacting support.