Moongiantgo XHH-28 Electric Grain Mill Grinder User Manual

1. შესავალი

Thank you for choosing the Moongiantgo XHH-28 Electric Grain Mill Grinder. This high-speed, multifunctional grinder is designed for pulverizing various dry materials, including grains, spices, and herbs, into fine powder. Constructed from high-quality stainless steel, it ensures durability and meets food safety standards. Please read this manual thoroughly before operation to ensure safe and efficient use of your new grinder.

სურათი 1: The Moongiantgo Electric Grain Mill Grinder, illustrating its capability to grind dried grains, spices, and herbs. It also clearly indicates that it is not suitable for wet, fresh, oily, or sticky materials such as fruit, meat, nuts, sugar, or salt.

მნიშვნელოვანი შენიშვნა: This grinder is specifically designed for dry materials only. Do not attempt to grind wet, fresh, oily, or sticky substances, as this can damage the machine and void the warranty. Ensure all materials are completely dry before grinding.

2. უსაფრთხოების ინსტრუქციები

თქვენი უსაფრთხოება უმნიშვნელოვანესია. გთხოვთ, დაიცვათ შემდეგი უსაფრთხოების ინსტრუქციები:

• Open-Cover-Stop Protection: The grinder is equipped with a safety device. If the lid is opened during operation, the machine will immediately stop to prevent injury. Ensure the lid is securely closed before starting.
• გადატვირთვისაგან დაცვა: In case of overload or overheating, the machine may stop functioning. This is a safety feature. Refer to the troubleshooting section for resolution.
• Dry Materials Only: Only grind dry materials. Wet or oily substances are not suitable and can cause damage.
• რეკომენდებული სიმძლავრე: Do not overfill. The material to be ground should cover the long blade in the middle and not exceed 2/3 of the tank capacity. This allows sufficient space for proper grinding circulation.
• ოპერაციული დრო: Do not operate continuously for more than 3 minutes. Allow the machine to rest for 5 to 10 minutes after every 3 minutes of operation to prevent overheating and motor damage.
• ელექტრო უსაფრთხოება: Ensure the power supply matches the grinder's voltage (220V). Do not operate with wet hands or in wet environments.

სურათი 2: Illustration of the safety buckle design, which stops the machine if the cover is opened, and the overload protector button, used for resetting after carbon brush replacement.

3. პროდუქტი დასრულდაview და კომპონენტები

The Moongiantgo XHH-28 Electric Grain Mill Grinder features a robust stainless steel body and a powerful motor for efficient grinding. Familiarize yourself with its components and included accessories.

მოყვება აქსესუარები:

• 1 x Electric Grain Grinder Unit
• 1 x Set of Spare Blades
• 2 x ნახშირბადის ჯაგრისი
• 1 x საწმენდი ფუნჯი
• 1 x Sieve
• 1 x მომხმარებლის სახელმძღვანელო
• 1 x After-sales Service Card

სურათი 3: დასრულდაview of the Moongiantgo Electric Grain Mill Grinder, detailing its dimensions and listing the various accessories included, such as spare blades, carbon brushes, cleaning brush, and sieve.

4. დაყენება

პირველ გამოყენებამდე მიჰყევით ამ ნაბიჯებს:

1. შეფუთვა: ფრთხილად ამოიღეთ ყველა კომპონენტი შეფუთვიდან.
2. განთავსება: Place the grinder on a stable, dry, and level surface. Ensure there is adequate ventilation around the unit.
3. პირველადი გაწმენდა: Wipe the interior of the grinding chamber with a dry cloth to remove any manufacturing residue.
4. სახურავის შემოწმება: Ensure the lid is properly aligned and securely closed. The safety mechanism requires the lid to be fully engaged for the grinder to operate.
5. დენის კავშირი: შეაერთეთ კვების კაბელი შესაბამის 220 ვოლტიან ელექტროგადამცემში.

5. საოპერაციო ინსტრუქციები

Follow these steps for grinding materials:

1. მოამზადეთ მასალები: Ensure your materials are completely dry. Break larger pieces into smaller, manageable sizes if necessary.
2. Load Materials: Open the lid and carefully place the dry material into the grinding chamber. Ensure the material covers the long blade and does not exceed 2/3 of the tank capacity.
3. უსაფრთხო სახურავი: Close the lid firmly. Make sure the safety buckles on both sides are fully engaged. If the lid is not properly closed, the grinder will not start.
4. ტაიმერის დაყენება: Use the timer switch to set the desired grinding duration (0-5 minutes). For most materials, a short burst of 10-30 seconds is sufficient.
5. დაფქვის დაწყება: Press the power switch to begin grinding.
6. მონიტორი: Observe the grinding process. For optimal results and to prevent overheating, do not grind continuously for more than 3 minutes.
7. დასვენების პერიოდი: After each grinding cycle (especially if it lasts close to 3 minutes), allow the machine to rest for 5 to 10 minutes before the next operation.
8. Check Fineness: Once the grinding cycle is complete, open the lid and check the fineness of the powder. If a finer powder is desired, you can use the included sieve to separate coarser particles and re-grind them.
9. Empty Grinder: Carefully tilt the non-detachable jar and use the cleaning brush to brush out the ground powder.

სურათი 4: A visual guide demonstrating the different fineness levels achievable for various materials (wheat, corn, hot peppers, cinnamon, dried moringa) after grinding for 10, 20, and 60 seconds.

6. მოვლა და დასუფთავება

Proper maintenance ensures the longevity and performance of your grinder.

დასუფთავება:

• Do Not Rinse: The grinding bowl is not removable and cannot be cleaned with water directly. Do not rinse the motor base or the grinding chamber with water.
• ქიმწმენდა: Use the provided cleaning brush to remove any residual powder from the grinding chamber.
• წაშალეთ: Wipe the interior of the chamber and the exterior of the machine with a dry cloth.

დანის გამოცვლა:

If blades become dull or damaged, they can be replaced:

1. გამორთეთ: Always unplug the grinder from the power outlet before performing any maintenance.
2. წვდომის პირები: გახსენით სახურავი.
3. თხილის მოშვება: Use a screwdriver to hold the middle screw in place. Then, use the provided wrench or sleeve to turn the blade's lock nut counter-clockwise to loosen it.
4. ჩანაცვლება: Carefully remove the old blades and install the new spare blades, ensuring they are securely fastened by tightening the lock nut clockwise.

ნახშირბადის ჯაგრისის შეცვლა:

If the overload protector triggers frequently, it may be time to replace the carbon brushes.

1. გამორთეთ: გამორთეთ საფქვავი დენის წყაროდან.
2. Locate Brushes: The carbon brushes are typically located on the sides of the motor housing.
3. ჩანაცვლება: Unscrew the caps covering the carbon brushes, remove the old brushes, and insert the new ones. Secure the caps.
4. გადატვირთვა: After replacing the carbon brushes, press the overload protector button (usually a small red button) to reset the machine.

სურათი 5: A visual guide on how to clean the grinder, emphasizing that the motor base should not be rinsed and the jar should not be washed directly with water. It shows the correct method of cleaning by wiping with a dry rag.

7. Დიაგნოსტიკა

თუ თქვენს საფქვავ მანქანასთან დაკავშირებით პრობლემები შეგექმნათ, იხილეთ შემდეგი გავრცელებული პრობლემები და მათი გადაჭრის გზები:

სურათი 6: დეტალური view explaining why the grinder might not start, highlighting the induction switch and the importance of ensuring the lid's rods are fully engaged with the buckle structures.

8. სპეციფიკაციები

9. გარანტია და მხარდაჭერა

Moongiantgo is committed to providing high-quality products and customer satisfaction.

• გარანტია: We offer a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.
• ტექნიკური მხარდაჭერა: Online technical support is available to all our valued customers. If you have any questions, require assistance with troubleshooting, or need further information, please contact our customer service team.
• საკონტაქტო ინფორმაცია: Please refer to the after-sales service card included with your product for specific contact details or visit the official Moongiantgo webსაიტი მხარდაჭერის ვარიანტებისთვის.