Quantek M8, ML8 დისტანციური მართვის ინსტრუქციის სახელმძღვანელო

შინაარსი დამალვა

სპეციფიკაციები

კონფიგურაცია 1
Top button is programmed to C1
Bottom button is programmed to C2

Primary control button

If you press the button while the door is opening, the door will stop. If you press the button again, the door will continue opening (See notes below).
When the door has fully opened, press the button again to close it.

If you press the button while the door is closing, the door will stop and reopen.

Deadman close button

Important! You must be always looking at thedoor.
This function is useful if the door is part way open and you want to close it, or for closing the door if there is any an issue with the safety devices.

შენიშვნები

The safety system requires the door to close from the top limit. If the door is stopped halfway and you press the primary control button, the door will open fully.

3 faint red flashes when pressing the remote indicates the battery needs changing.

კონფიგურაცია 2
Top button is programmed to C3
Bottom button is programmed to C4

გახსნის ღილაკი
Use this button to open the door.

დახურვის ღილაკი

Use this button to close the door.
If you press the button while the door is opening, the door will stop.
If you press the button while the door is stopped, it will open before closing automatically. (See notes below).

If the button is unresponsive, there is likely an issue with the safety devices. To close the door, press and hold the button, after 5 seconds the door will begin to close in deadman. Keep the button pressed until the door is shut.
Important! You must be always looking at the door.

შენიშვნები

The safety system requires the door to close from the top limit. If the door is stopped halfway and you press the close button, the door will open first and then close automatically.

Always check the door has fully closed before walking or driving away.
3 faint red flashes when pressing the remote indicates the battery needs changing

Q: What should I do if the door doesn't respond to the remote?

A: Check the battery level in the remote. If there are 3 faint red flashes when pressing, it indicates the battery needs changing.

Quantek M8, ML8 Remote Control [pdf] ინსტრუქციის სახელმძღვანელო
M8-ML8 RS3 KIT, M8 ML8 Remote Control, M8 ML8, Remote Control

დატოვე კომენტარი