Ranco K 59 L 1287 Refrigerator Thermostat Instruction Manual

1. შესავალი

This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of your Ranco K 59 L 1287 refrigerator thermostat. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.

The Ranco K 59 L 1287 is designed as an alternative replacement thermostat for various refrigerator and freezer models, particularly those with a 0* compartment or 1-star rating, and refrigerator-freezer combinations. It replaces thermostats such as the K59 H1300.

2. პროდუქტი დასრულდაview

The Ranco K 59 L 1287 thermostat is a crucial component for regulating the temperature within your refrigeration appliance. It features a capillary tube for temperature sensing and specific contact configurations for electrical connections.

სურათი 1: დასრულდაview of the Ranco K 59 L 1287 thermostat with its capillary tube.

ძირითადი მახასიათებლები:

• Reference Spare Part: RANCO K 59 L 1287.
• განაცხადი: Suitable for spacious 1-star refrigerators, refrigerator-freezer combinations, and freezers.
• საკონტაქტო კონფიგურაცია: Separate contacts for 4, 6, and 3.
• Temperature Values:
  • Continuous operation: +5 °C
  • Warm cut-in: -7 °C
  • Cold cut-in: -19 °C
• კაპილარული მილის სიგრძე: 900 mm, equipped with a protective hose.
• მოწყობილობები: Screw-type connections.

სურათი 2: ახლოდან view of the thermostat showing the electrical connection terminals.

3. სპეციფიკაციები

4. დაყენება და ინსტალაცია

გაფრთხილება: Installation should only be performed by a qualified technician. Disconnect the appliance from the main power supply before beginning any installation or repair work to prevent electric shock.

ინსტალაციის ნაბიჯები:

1. უსაფრთხოება პირველ რიგში: Ensure the refrigerator or freezer is unplugged from the wall outlet.
2. ძველი თერმოსტატის ნახვა: Locate and carefully remove the old thermostat. This may involve removing control panels or access covers. Note the position and wiring of the old thermostat.
3. გათიშვა გაყვანილობა: Carefully disconnect the electrical wires from the old thermostat. It is highly recommended to take photos or draw a diagram of the wiring connections before disconnecting.
4. კაპილარული მილის ამოღება: Gently pull out the capillary tube of the old thermostat from its housing or insulation. Be careful not to bend or damage the new capillary tube during installation.
5. ახალი თერმოსტატის დაყენება:
   

   სურათი 3: The Ranco K 59 L 1287 thermostat showing the mounting nut and capillary tube coiled.
   • Mount the new Ranco K 59 L 1287 thermostat in the same location as the old one, using the provided screw fittings.
   • Carefully insert the new capillary tube into the designated sensing area. Ensure it is not kinked or damaged. The protective hose on the capillary tube should remain intact.
6. გაყვანილობის დაკავშირება: Reconnect the electrical wires to the new thermostat according to your diagram or photos. Ensure all connections are secure. The contacts are typically labeled (e.g., 4, 6, 3).
7. ხელახლა შეკრება: Replace any removed control panels or covers.
8. ტესტი: Plug the appliance back into the power outlet. Set the thermostat to a desired temperature and monitor the appliance's operation to ensure it cools correctly and cycles on/off as expected.

5. საოპერაციო ინსტრუქციები

The Ranco K 59 L 1287 thermostat functions automatically to maintain the set temperature within your refrigerator or freezer. Once installed, its operation is typically controlled by the appliance's temperature dial or control knob.

ტემპერატურის კონტროლი:

• Adjust the temperature setting on your appliance's control panel to achieve the desired cooling level.
• The thermostat will automatically switch the compressor on when the temperature rises above the set point (warm cut-in: -7 °C) and switch it off when the temperature drops to the desired level (cold cut-in: -19 °C).
• For continuous operation, the thermostat is designed to maintain approximately +5 °C.
• Allow several hours for the appliance to reach the new temperature setting after adjustment.

შენიშვნა: The specific temperature range and dial markings are dependent on your appliance's design. Refer to your appliance's user manual for precise temperature setting guidance.

6. მოვლა

The Ranco K 59 L 1287 thermostat is designed for long-term, reliable operation and requires minimal maintenance.

ზოგადი მოვლა:

• დასუფთავება: If the thermostat housing becomes dusty or dirty, wipe it clean with a dry or slightly damp ქსოვილი. გაწმენდამდე დარწმუნდით, რომ მოწყობილობა გამორთულია დენის წყაროდან.
• ინსპექტირება: Periodically inspect the capillary tube for any signs of damage or kinks. Ensure it remains securely in its sensing location.
• ელექტრული კავშირები: If accessible, occasionally check the electrical connections to ensure they are tight and free from corrosion. Always disconnect power before inspecting electrical components.

Do not attempt to disassemble the thermostat. If you suspect a malfunction, refer to the troubleshooting section or consult a qualified technician.

7. Დიაგნოსტიკა

If your appliance is not functioning correctly after thermostat installation, consider the following common issues:

• მოწყობილობა არ ცივდება:
  • Check if the appliance is plugged in and receiving power.
  • Verify that the thermostat's wiring connections are correct and secure.
  • Ensure the capillary tube is properly positioned and not damaged.
  • The temperature setting might be too high. Adjust to a colder setting.
• Appliance Overcooling / Freezing:
  • The temperature setting might be too low. Adjust to a warmer setting.
  • The capillary tube might be dislodged or improperly sensing the temperature.
• კომპრესორი მუშაობს უწყვეტად:
  • This could indicate the thermostat is not reaching its cut-off temperature, possibly due to improper capillary tube placement or a faulty thermostat.
  • Check for excessive frost buildup, which can affect temperature sensing.
• Compressor Does Not Start:
  • შეამოწმეთ ელექტრომომარაგება.
  • Check thermostat wiring.
  • The thermostat might be faulty and not signaling the compressor to start.

If these steps do not resolve the issue, it is recommended to contact a qualified appliance repair technician.

8. თავსებადობა

The Ranco K 59 L 1287 thermostat is designed as a compatible alternative for a wide range of refrigeration appliances. It directly replaces the K59 H1300 thermostat.

Known Compatible Manufacturers and Models (Partial List):

• Electrolux Group: AEG, Electrolux, Zanussi, Zanker, Juno. (e.g., replaces 125022473000 (KL3), 899671069599, 125022583300 (Class 3)).
• Whirlpool Group: Bauknecht, Ignis, Philips, Whirlpool. (e.g., replaces 481227128059).
• სხვა ბრენდები:
  • Atea A13-0173
  • Danfoss 077 B 3224
  • Ranco H0104 A59, A59 H104 Rose
  • Quelle Privileg Matura (e.g., 01258938, K59H1300-001)
  • Liebherr (e.g., 6151039, 6151079, 6151086 (K59 L1287/000))
  • Miele (e.g., 1513060 (device K59H1300))

This list is not exhaustive. Always verify the model number of your existing thermostat against the Ranco K 59 L 1287 or consult your appliance's service manual for compatibility.

9. გარანტია და მხარდაჭერა

For warranty information, please refer to the terms and conditions provided by your retailer or the Ranco official webსაიტი. შეინახეთ შეძენის დამადასტურებელი საბუთი გარანტიასთან დაკავშირებული ნებისმიერი პრეტენზიისთვის.

If you require technical assistance or have questions not covered in this manual, please contact the retailer where you purchased the product or visit the Ranco support webსაიტი შემდგომი დახმარებისთვის.