ProMaster Clamper Tripod and Clamp ინსტრუქციის სახელმძღვანელო

შესავალი

The ProMaster Clamper is a versatile camera support system designed to function as both a tabletop tripod and a clamping device. Its unique design allows it to securely attach to various surfaces, providing flexible camera positioning options for photographers and videographers.

დაყენება

1. სამფეხად გამოყენება

• ფეხების გაშლა: Unfold the three legs of the Clampეჰ.
• უსაფრთხო პოზიცია: Ensure the central knob, which controls the leg spread, is tightened to secure the leg positions.
• განთავსება: მოათავსეთ Clamper on a stable, flat surface.

2. Using as a Clamp

• პოზიცია Clamp: Position the two main clamp legs around the desired object or surface. The clamp is designed to work on flat, thin, and round surfaces.
• საწყისი გამკაცრება: Tighten the main nut to bring the clamp legs together, securing the Clamper to the object.
• საბოლოო უსაფრთხოება: For additional security, screw down the grippers on the clamp arms until the unit is firmly attached and stable.

3. კამერის მიმაგრება

• სამონტაჟო კამერა: Mount your camera onto the 1/4-inch screw located on the ball head. Rotate the camera until it is securely fastened.
• კუთხის დარეგულირება: Adjust the ball head's tension knob to set the desired camera angle. Ensure it is tightened firmly after adjustment.

Image: The ProMaster Clamper shown in its versatile configuration, ready for use as both a tripod and a clamp. The image highlights the ball head, tightening knobs, and the adjustable clamp legs with grippers.

ოპერაციული ინსტრუქციები

ერთხელ კლamper is set up as either a tripod or a clamp and your camera is attached, ensure all knobs and fasteners are securely tightened before use. This prevents accidental movement or detachment of your equipment. The integrated ball head allows for precise angle adjustments. To adjust, loosen the ball head tension knob, position the camera to the desired angle, and then re-tighten the knob firmly to lock the position.

მოვლა

• დასუფთავება: Keep the ProMaster Clamper clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, which can damage the finish or components.
• ინსპექტირება: Periodically check all screws, nuts, and knobs for tightness and ensure they operate smoothly. If any part feels loose, tighten it carefully.
• შენახვა: Store the Clamper in a dry environment away from extreme temperatures and direct sunlight to prolong its lifespan.

პრობლემების მოგვარება

საკითხი: Clamper does not hold securely.

გამოსავალი: Ensure all tightening mechanisms, including the central knob for leg positioning (when used as a tripod) and the main nut and grippers (when used as a clamp), are fully tightened. For clamping, apply sufficient force to the main nut and grippers to achieve a firm hold on the surface. Verify the surface material is suitable for clamping and not too slick or fragile.

Issue: Camera movement after adjustment.

გამოსავალი: Verify that the ball head tension knob is adequately tightened after positioning the camera. For heavier camera setups, ensure the knob is tightened with sufficient force to prevent slippage.

სპეციფიკაციები

საგარანტიო ინფორმაცია

Specific warranty details for the ProMaster Clamper are not provided in this manual. For current warranty terms and conditions, please refer to the manufacturer's official website or contact ProMaster customer service directly.

მომხმარებელთა მხარდაჭერა

For technical assistance, product inquiries, or customer service regarding your ProMaster Clamper, please contact the manufacturer:

მწარმოებელი: პრომასტერი

Please visit the official ProMaster webსაიტი საკონტაქტო ინფორმაციისა და დამატებითი რესურსებისთვის.