1. პროდუქტი დასრულდაview
An image of the COX M75 manual epoxy applicator, featuring a blue frame, black handle, and metal components for dispensing dual cartridges.
ძირითადი მახასიათებლები
- Dedicated mix ratio 1:1
- Stubby cartridge system
- მექანიკური ავანტიtagე 18:1
- Support discs - secure and accurate cartridge fit
- Wear Compensating Device (WCD)
- Catch plate - sintered steel
- High viscosity materials capability
პროდუქტის აღწერა
The COX M75 is a manual dispenser designed for dual 75ml x 75ml cartridges. It features a stubby cartridge system and provides a mechanical advantage of 18:1, making it suitable for use with low to medium viscosity materials. The applicator includes support discs to ensure a secure and accurate cartridge fit, a durable sintered steel catch plate, and a wear compensating device for extended product life. COX is a recognized leader in quality applicators, with all products manufactured to rigid quality management standards for reliability and durability.
2. უსაფრთხოების ინფორმაცია
Always read and understand all safety warnings and instructions before operating this applicator. Failure to do so may result in injury or damage to the product.
- თვალის დაცვა: Always wear appropriate eye protection (safety glasses or goggles) when handling epoxy materials and operating the applicator.
- კანის დაცვა: Wear chemical-resistant gloves to prevent skin contact with epoxy resins, which can cause irritation or sensitization.
- ვენტილაცია: Use the applicator in a well-ventilated area to avoid inhaling fumes from epoxy materials.
- მასალების უსაფრთხოების მონაცემთა ცხრილები (MSDS): Refer to the MSDS provided by the epoxy material manufacturer for specific handling, storage, and disposal instructions.
- სათანადო განკარგვა: Dispose of used cartridges and any epoxy waste according to local regulations.
- შეინახეთ ბავშვებისთვის მიუწვდომელ ადგილას: Store the applicator and epoxy materials in a secure location away from children and pets.
- შეამოწმეთ გამოყენებამდე: Before each use, inspect the applicator for any signs of damage or wear. Do not use if damaged.
3. დაყენება
- Prepare Cartridges: Ensure the dual 75ml x 75ml epoxy cartridges are at the recommended temperature for dispensing as specified by the epoxy manufacturer. Remove any caps or seals from the cartridge nozzles.
- შეკუმშვის დგუში: Pull the plunger rod of the applicator all the way back until it locks into place, creating space for the cartridges.
- Insert Cartridges: Carefully insert the dual epoxy cartridges into the applicator's frame. Ensure the cartridge nozzles are aligned with the front opening and the base of the cartridges rests securely against the support discs. The stubby cartridge system is designed for a precise fit.
- შერევის საქშენის მიმაგრება: Securely attach the appropriate static mixing nozzle to the end of the cartridges. Ensure it is tightly fastened to prevent leaks during dispensing.
4. საოპერაციო ინსტრუქციები
- Initial Dispense (Purge): Before applying to your workpiece, dispense a small amount of material onto a scrap surface. This ensures proper mixing within the nozzle and purges any unmixed material.
- მასალის გამოყენება: Position the nozzle at the desired application point. Squeeze the trigger handle to dispense the epoxy. The 18:1 mechanical advantage provides efficient dispensing for low to medium viscosity materials.
- კონტროლის ნაკადი: Maintain steady pressure on the trigger for a consistent bead. Release the trigger to stop the flow.
- წნევის შემსუბუქება: After dispensing, press the thumb release lever (located near the handle) to disengage the plunger rod. This relieves pressure on the cartridges and prevents material from continuing to flow.
- Remove Cartridges: Once dispensing is complete or if changing cartridges, fully retract the plunger rod and carefully remove the cartridges from the applicator.
5. მოვლა
Proper maintenance ensures the longevity and optimal performance of your COX M75 applicator.
- დასუფთავება: After each use, clean any epoxy residue from the applicator frame, plunger rod, and especially the sintered steel catch plate. Use a suitable solvent recommended by the epoxy manufacturer for cleaning uncured epoxy. Avoid harsh abrasives that could damage the finish.
- შეზეთვა: Periodically apply a light coat of silicone-based lubricant to the plunger rod to ensure smooth operation.
- Inspect Wear Compensating Device (WCD): The WCD is designed to maintain consistent pressure over time. Regularly check its function to ensure proper engagement with the plunger rod.
- შენახვა: Store the applicator in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure the plunger rod is fully retracted before storage.
- საქშენების მოვლა: Always remove and properly dispose of used mixing nozzles. Do not attempt to clean and reuse disposable nozzles.
6. Დიაგნოსტიკა
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| Material not dispensing or dispensing unevenly. | Cartridge not fully seated; Nozzle clogged; Epoxy too cold/viscous; Plunger not engaging properly. | Ensure cartridges are fully inserted and locked. Replace clogged nozzle. Warm epoxy to recommended temperature. Check plunger rod and catch plate for debris or wear. |
| Epoxy leaking from nozzle connection. | Nozzle not tightened sufficiently; Damaged nozzle or cartridge threads. | Tighten nozzle securely. Replace nozzle or cartridge if threads are damaged. |
| Plunger rod difficult to retract or advance. | Lack of lubrication; Debris on rod or catch plate; Bent rod. | Clean and lubricate plunger rod. Remove any debris. If rod is bent, contact customer support for replacement. |
| Cartridges do not fit securely. | Incorrect cartridge size; Damaged support discs. | Ensure you are using 75ml x 75ml dual cartridges. Inspect support discs for damage. |
7. სპეციფიკაციები
| ატრიბუტი | დეტალი |
|---|---|
| ბრენდი | კოქსი |
| მოდელის ნომერი | M75 |
| ნივთის მოცულობა | 75 Milliliters x 75 Milliliters (for dual cartridges) |
| მექანიკური ადვანიtage | 18:1 |
| თავსებადი მასალა | Epoxy Resin (Metal compatible) |
| ნივთის წონა | დაახლოებით 1 ფუნტი |
| პაკეტის ზომები | დაახლოებით 14.84 x 8.98 x 4.02 ინჩი |
| წარმოშობის ქვეყანა | გაერთიანებული სამეფო |
| UPC | 717647310750 |
8. გარანტია და მხარდაჭერა
COX products are manufactured to high standards of quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official COX North America website. For technical support, spare parts, or service inquiries, please contact COX North America directly.
მწარმოებელი: COX North America
Webსაიტი: www.cox-applicators.com (This is a general placeholder link, please refer to official product documentation for exact support contact details.)
