მარსი 33490

Mars 33490 Heat Pump Defrost Thermostat User Manual

მოდელი: 33490

1. შესავალი

This manual provides instructions for the proper installation, operation, and maintenance of the Mars 33490 Heat Pump Defrost Thermostat. This device is designed to manage the defrost cycle of heat pump systems, ensuring efficient operation by sensing the temperature of the outdoor coil.

2. პროდუქტის მახასიათებლები

  • Designed specifically for heat pump defrost applications.
  • Features a 3/8 inch tube mounting mechanism for secure attachment.
  • Equipped with 54 inch leads for flexible and convenient wiring.
  • Activates (opens) at approximately 80°F (26.7°C) to terminate defrost.
  • Deactivates (closes) at approximately 30°F (-1.1°C) to initiate defrost.

3. უსაფრთხოების ინფორმაცია

უსაფრთხოების მნიშვნელოვანი ინსტრუქციები

Read all instructions carefully before installation or operation. Failure to follow these instructions could result in property damage, personal injury, or death.

  • Always disconnect power to the heat pump system at the circuit breaker before installing or servicing the thermostat.
  • Installation should be performed by a qualified HVAC technician or licensed electrician to ensure safety and proper function.
  • დარწმუნდით, რომ ყველა გაყვანილობა შეესაბამება ადგილობრივ ელექტრო კოდებსა და რეგულაციებს.
  • Do not operate the heat pump system if the thermostat or any associated components are visibly damaged.
  • This product may be subject to California Proposition 65. For more information, visit www.P65Warnings.ca.gov. დაიბანეთ ხელები დამუშავების შემდეგ.

4. დაყენება და ინსტალაცია

ინსტალაციის სახელმძღვანელო

The Mars 33490 defrost thermostat is designed for secure mounting on a 3/8 inch diameter tube within the heat pump system.

  1. დენის გათიშვა: Before commencing any work, ensure the main power supply to the heat pump unit is completely disconnected at the circuit breaker to prevent electrical shock.
  2. სამონტაჟო ადგილი: Identify a suitable 3/8 inch diameter tube on the heat pump's outdoor coil. This location should accurately reflect the coil's temperature for effective defrost control.
  3. თერმოსტატის დამონტაჟება: Securely attach the thermostat to the selected 3/8 inch tube using its integrated mounting clip. Ensure there is good thermal contact between the thermostat's sensor and the tube for accurate temperature readings.
  4. გაყვანილობა: Connect the 54 inch leads of the thermostat into the heat pump's control circuit. Refer to the heat pump manufacturer's specific wiring diagram for correct connections. Typically, this thermostat is wired in series with the defrost control board's sensor input.
  5. დაადასტურეთ კავშირები: Double-check all wiring connections to ensure they are secure and correctly terminated according to the wiring diagram.
  6. ენერგიის აღდგენა: Once installation is complete and all connections have been verified, safely restore power to the heat pump system.
Mars 33490 Heat Pump Defrost Thermostat with 3/8 inch tube mount and wiring leads
Image 1: Mars 33490 Heat Pump Defrost Thermostat. This image shows the compact design of the thermostat, featuring its white cylindrical body, copper-colored base, metal mounting clip, and black electrical leads. The 3/8 inch tube mount is visible, designed for secure attachment to a heat pump's refrigerant line.
მხარე view of Mars 33490 Heat Pump Defrost Thermostat showing wiring and mounting clip
სურათი 2: გვერდი view of the Mars 33490 Heat Pump Defrost Thermostat. This perspective highlights the robust metal mounting clip that secures the thermostat to a refrigerant tube, along with the entry point of the black wiring leads into the thermostat body. The product identification numbers are faintly visible on the white casing.

5. ოპერაცია

ფუნქციური ოპერაცია

The Mars 33490 is an automatic defrost thermostat that operates by sensing the temperature of the outdoor coil. It functions as follows:

  • When the coil temperature rises to approximately 80°F (26.7°C), the thermostat's internal switch will open. This signal typically indicates that the coil is clear of ice and signals the defrost cycle to terminate.
  • When the coil temperature drops to approximately 30°F (-1.1°C), the thermostat's internal switch will close. This action initiates or allows the defrost cycle to begin, provided other defrost conditions (e.g., time, pressure differential) are met by the heat pump's main control board.

This thermostat works in conjunction with the heat pump's main control board to ensure efficient defrosting, preventing excessive ice buildup on the outdoor coil and maintaining optimal heating efficiency.

6. მოვლა

ტექნიკური სახელმძღვანელო მითითებები

The Mars 33490 Defrost Thermostat is designed for reliable, long-term operation and is generally maintenance-free. However, periodic inspection is recommended to ensure continued optimal performance.

  • წლიური შემოწმება: During routine heat pump maintenance, visually inspect the thermostat for any signs of physical damage, corrosion, or loose wiring connections.
  • სისუფთავე: Ensure the area around the thermostat is kept free from debris, dirt, leaves, or ice buildup that could interfere with accurate temperature sensing.
  • უსაფრთხო მონტაჟი: Verify that the thermostat remains securely mounted to the refrigerant tube to maintain proper thermal contact and accurate temperature readings.

If any damage is observed, or if the heat pump exhibits unusual defrost behavior (e.g., no defrost, continuous defrost), consult a qualified HVAC technician for diagnosis and repair.

7. Დიაგნოსტიკა

საერთო პრობლემების მოგვარება

This section provides general guidance for common issues related to defrost thermostat operation. Always consult a qualified technician for complex diagnostics and repairs, especially when dealing with electrical components.

პრობლემაშესაძლო მიზეზიგამოსავალი
Heat pump not defrostingDefrost thermostat failure (stuck open circuit)A qualified technician should test thermostat continuity. Replace if faulty.
Heat pump defrosts too frequently or infrequentlyImproper thermostat mounting, poor thermal contact, or faulty thermostatVerify secure mounting and good thermal contact with the refrigerant tube. A technician can test thermostat operation and replace if necessary.
Thermostat appears physically damagedPhysical impact, environmental exposure, or wearDisconnect power and replace the thermostat immediately to prevent further system issues.

8. სპეციფიკაციები

ტექნიკური მახასიათებლები

  • მოდელი: მარსი 33490
  • მწარმოებელი: მარსი
  • ნაწილის ნომერი: 33490
  • Open Temperature: 80°F (26.7°C)
  • Close Temperature: 30°F (-1.1°C)
  • სამონტაჟო ტიპი: 3/8 inch Tube Mount
  • ტყვიის სიგრძე: 54 ინჩი
  • პროდუქტის ზომები: დაახლოებით 5 x 3 x 2 ინჩი (12.7 x 7.6 x 5.1 სმ)
  • ნივთის წონა: დაახლოებით 4 უნცია (113 გრამი)
  • საჭირო ბატარეები: არა
  • პირველი ხელმისაწვდომი თარიღი: 20 წლის 2010 მაისი

9. გარანტია და მხარდაჭერა

გარანტიის ინფორმაცია და მომხმარებელთა მხარდაჭერა

For specific warranty details regarding your Mars 33490 Heat Pump Defrost Thermostat, please refer to the documentation provided with your original purchase or contact Mars customer support directly.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact your authorized Mars dealer or visit the official Mars webსაიტი მხარდაჭერის რესურსებისთვის.

მწარმოებელი: მარსი

ნაწილის ნომერი: 33490

ASIN: B003N6AB98

დაკავშირებული დოკუმენტები - 33490

წინასწარიview MARS SGF80S120D5S1A Single-Stage მრავალპოზიციური გაზის ღუმელის ნაწილების სია
MARS SGF80S120D5S1A Single-S-ის ოფიციალური ნაწილების სიაtagმრავალპოზიციური გაზის ღუმელი. ეს დოკუმენტი დეტალურად აღწერს SE სერიის 80% AFUE ღუმელის კომპონენტებს, ნაწილების დასახელებებს და რაოდენობებს.
წინასწარიview MARS გეოთერმული და კომერციული WSHP აქსესუარების კატალოგი
MARS-ის ეს კატალოგი დეტალურად აღწერს გეოთერმული და კომერციული წყლის წყაროს თბოტუმბოს (WSHP) სისტემების აქსესუარებს, მათ შორის სხვადასხვა ნაკადის ცენტრებს, მარყუჟოვან ტუმბოებს, ფიტინგებს, ხელსაწყოებს, მართვის საშუალებებს და შლანგების ნაკრებებს, რომლებიც შექმნილია ეფექტური და საიმედო მუშაობისთვის.
წინასწარიview Manuel d'Installation and d'utilisation de la Commande Filaire MARS 7800-500
გზამკვლევი დასრულებულია MARS მოდელის 7800-500 ინსტალაციისა და გამოყენებისთვის. Découvrez les procédures d'Installation, les caractéristiques, les fonctions და les consignes de securité pour votre system CVC.
წინასწარიview MARS HVAC/R სერვისისა და მონტაჟის კატალოგი
გაეცანით HVAC/R სერვისისა და მონტაჟის პროდუქტების MARS-ის ყოვლისმომცველ კატალოგს. იპოვეთ ისეთი აუცილებელი კომპონენტები, როგორიცაა კონდიციონერის სამონტაჟო ფრჩხილები, კონდენსატორის ბალიშები, ვენტილაციის კომპლექტები, გათიშვის ყუთები და სხვა, რომლებიც შექმნილია პროფესიონალური მონტაჟისა და საიმედო მუშაობისთვის.
წინასწარიview MARS 24 (MW) წყალი-წყალ სერია: ინსტალაციის, ექსპლუატაციისა და მოვლა-პატრონობის სახელმძღვანელო
MARS 24 (MW) წყალი-წყალ სერიის ყოვლისმომცველი სახელმძღვანელო, რომელიც მოიცავს კომერციული გამოყენების ინსტალაციის, ექსპლუატაციისა და მოვლა-პატრონობის პროცედურებს. მოიცავს მოდელების ნომენკლატურას, უსაფრთხოების გაფრთხილებებს, მაცივარ-საშუალების სისტემის მომსახურებას, ფიზიკურ მონაცემებს და პრობლემების მოგვარებას.
წინასწარიview MARS Hyper Heat ერთზონიანი გვერდითი გამონადენის ინვერტორული კონდიციონერის მომხმარებლის სახელმძღვანელო
MARS Hyper Heat ერთზონიანი გვერდითი განმუხტვის ინვერტორული კონდიციონერის ყოვლისმომცველი მომხმარებლის სახელმძღვანელო. მოიცავს უსაფრთხოების ზომებს, მუშაობის პირობებს, მოვლა-პატრონობას, პრობლემების მოგვარებას და გარანტიის დეტალებს VCD24, 30, 36, 48, 60 SA სერიის მოდელებისთვის.