LaMotte Insta-Test 30 Free Chlorine and pH TesTabs Instruction Manual

შესავალი

This manual provides instructions for the proper use and maintenance of the LaMotte Insta-Test 30 Free Chlorine and pH TesTabs kit. This kit is designed for accurate measurement of free chlorine and pH levels in water, commonly used for pools and spas.

პროდუქტი დასრულდაview

The LaMotte Insta-Test 30 kit includes the following components:

• DPD 1 TesTabs (for Free Chlorine)
• Phenol Red TesTabs (for pH)
• Comparator Block with integrated color charts
• შენახვის საქმე

სურათი 1: LaMotte Insta-Test 30 Free Chlorine and pH Analyzer Kit. This image displays the complete kit, including two blister packs of TesTabs (DPD 1 for Free Chlorine and Phenol Red for pH), a blue plastic case for storage, and a clear plastic comparator block with color charts for both Free Chlorine (CI DPD) and pH.

დაყენება

Preparation for Testing

1. Ensure the comparator block is clean and dry. Rinse with the water to be tested before use.
2. Gather the appropriate TesTabs for the desired test (DPD 1 for Free Chlorine, Phenol Red for pH).
3. შეაგროვეთ წყალი სample from the area to be tested. For pools, collect water at elbow depth, away from return lines.

ოპერაციული ინსტრუქციები

Free Chlorine Test Procedure

1. Fill the left chamber of the comparator block to the "FILL" line with the water sampლე.
2. Add one DPD 1 TesTab to the water sample in the left chamber. Do not touch the TesTab directly with your fingers.
3. Cap the chamber and shake gently until the TesTab dissolves completely. A pink color will develop if free chlorine is present.
4. Immediately compare the color in the chamber to the Free Chlorine (CI DPD) color standards on the comparator block. Read the result that most closely matches the sampფერი.

pH Test Procedure

1. Fill the right chamber of the comparator block to the "FILL" line with the water sampლე.
2. Add one Phenol Red TesTab to the water sample in the right chamber. Do not touch the TesTab directly with your fingers.
3. Cap the chamber and shake gently until the TesTab dissolves completely. A color will develop indicating the pH level.
4. Immediately compare the color in the chamber to the pH color standards on the comparator block. Read the result that most closely matches the sampფერი.

შენიშვნა: For accurate results, perform tests immediately after collecting the water sample and read results promptly after TesTab dissolution.

მოვლა

დასუფთავება და შენახვა

• After each use, thoroughly rinse the comparator block with clean water and allow it to air dry.
• Store TesTabs in their original blister packs in a cool, dry place, away from direct sunlight and moisture.
• Keep the entire kit in its protective storage case when not in use.

პრობლემების მოგვარება

საერთო საკითხები და გადაწყვეტილებები

სპეციფიკაციები

პროდუქტის სპეციფიკაციები

• მწარმოებელი: ლამოტი
• მოდელი: Insta-Test 30
• ASIN: B003TX5TLK
• ნივთის წონა: 0.8 უნცია
• პაკეტის ზომები: 7.8 x 4.2 x 0.9 ინჩი
• Tests Performed: Free Chlorine (DPD 1), pH (Phenol Red)

გარანტია და მხარდაჭერა

გარანტიის ინფორმაცია და მომხმარებელთა მხარდაჭერა

For specific warranty details or technical assistance, please contact LaMotte customer support directly. Refer to the product packaging or the official LaMotte webსაიტი საკონტაქტო ინფორმაციისთვის.