Mitutoyo 115-305 Tube Micrometer Instruction Manual

1. შესავალი

The Mitutoyo 115-305 Tube Micrometer is a precision measuring instrument designed for accurately determining the wall thickness of various tubing. This micrometer features a cylindrical anvil and a ratchet stop mechanism to ensure consistent measuring force, contributing to high accuracy. It has a measuring range of 0-1 inch with a graduation of 0.001 inch and an accuracy of +/-0.00015 inch. This manual provides essential information for the proper use, care, and maintenance of your micrometer.

2. პროდუქტის კომპონენტები

Familiarize yourself with the main components of the Mitutoyo 115-305 Tube Micrometer.

სურათი 1: Mitutoyo 115-305 Tube Micrometer shown in its protective plastic case. The micrometer consists of a frame, cylindrical anvil, spindle, thimble, sleeve, and ratchet stop.

სურათი 2: უფრო ახლოს view of the Mitutoyo 115-305 Tube Micrometer, highlighting the cylindrical anvil and the measuring faces. The cylindrical anvil is designed to fit inside tubing for accurate wall thickness measurements.

• ჩარჩო: The main body of the micrometer.
• Cylindrical Anvil: The fixed measuring face, specifically shaped for internal tube measurements.
• Spindle: The movable measuring face, which advances or retracts when the thimble is rotated.
• თითი: The rotating part used to adjust the spindle, marked with graduations.
• ყდის: The stationary part with the main scale (datum line and graduations).
• Ratchet Stop: Ensures constant and repeatable measuring force by slipping when the correct pressure is applied.
• საკეტი Clamp: Used to secure the spindle in position after a measurement.

3. დაყენება

1. შეფუთვა: Carefully remove the micrometer from its protective case. Inspect for any visible damage.
2. დასუფთავება: Before first use, gently wipe all measuring surfaces with a clean, lint-free cloth. Avoid using harsh solvents.
3. Temperature Acclimation: Allow the micrometer to acclimate to the ambient temperature of the measurement environment for at least 15-20 minutes to ensure accurate readings.
4. ნულოვანი რეგულირება:
   • Close the measuring faces by rotating the thimble using the ratchet stop until it clicks 2-3 times.
   • Check if the zero line on the thimble aligns perfectly with the datum line on the sleeve.
   • If not aligned, use the supplied wrench to rotate the sleeve until the zero lines match. For micrometers with a lock clamp, ensure it is loosened before adjustment and tightened afterward.

4. საოპერაციო ინსტრუქციები

Follow these steps for accurate measurement of tube wall thickness:

1. მოამზადეთ სამუშაო ნაწილი: Ensure the tubing to be measured is clean and free from burrs, oil, or debris that could affect accuracy.
2. მიკრომეტრის განთავსება:
   • Open the micrometer jaws slightly wider than the expected wall thickness.
   • Carefully insert the cylindrical anvil into the tube opening.
   • Position the flat measuring face of the spindle against the outer surface of the tube wall, and the cylindrical anvil against the inner surface of the tube wall.
3. მიიღეთ გაზომვა:
   • Rotate the thimble using the ratchet stop until the spindle gently contacts the workpiece.
   • Continue rotating the ratchet stop until it clicks 2-3 times. This ensures a consistent measuring force.
   • Do not overtighten, as this can lead to inaccurate readings and potential damage to the micrometer or workpiece.
4. წაიკითხეთ გაზომვა:
   • Sleeve Scale: Read the largest visible whole number on the sleeve, which represents inches. Each major line represents 0.100 inch, and each minor line represents 0.025 inch.
   • Thimble Scale: Read the line on the thimble that aligns with the datum line on the sleeve. Each graduation on the thimble represents 0.001 inch.
   • Total Reading: Add the readings from the sleeve and the thimble to get the total measurement.
5. Lock the Spindle (Optional): If desired, use the lock clamp to secure the spindle position before removing the micrometer from the workpiece to prevent accidental changes to the reading.
6. განმეორებითი გაზომვები: For critical applications, take multiple measurements at different points on the tube wall to ensure consistency and accuracy.

5. მოვლა

Proper maintenance ensures the longevity and accuracy of your Mitutoyo Tube Micrometer.

• დასუფთავება: After each use, wipe the micrometer clean with a soft, lint-free cloth. For stubborn grime, a small amount of instrument cleaning fluid can be used, applied to the cloth, not directly to the micrometer.
• შეზეთვა: Periodically apply a thin film of light machine oil to the spindle threads to ensure smooth operation and prevent corrosion. Avoid over-lubrication.
• შენახვა: Store the micrometer in its original protective case when not in use. Keep it in a dry, temperature-controlled environment, away from direct sunlight, dust, and corrosive substances.
• კალიბრაცია: Regular calibration by a qualified technician is recommended to maintain accuracy, especially for professional or critical applications.
• დამუშავება: Avoid dropping or subjecting the micrometer to impact, as this can damage its precision components.

6. Დიაგნოსტიკა

If you encounter issues with your micrometer, refer to the following common problems and solutions:

7. სპეციფიკაციები

8. გარანტია და მხარდაჭერა

For warranty information, technical support, or service inquiries, please contact Mitutoyo customer service directly or visit their official website. Retain your purchase receipt for warranty claims.

Mitutoyo Official Webსაიტი: www.mitutoyo.com