DigiTech IPB10 Guitar Floor Multi-Effects Pedal User Manual

1. შესავალი

The DigiTech IPB10 is an advanced programmable guitar floor multi-effects pedalboard designed to provide guitarists with extensive control over their sound. It integrates with an Apple iPad (not included) to offer a visual and intuitive interface for creating, editing, and managing a wide array of guitar effects, amplifiers, and cabinets. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your IPB10 unit.

2. მნიშვნელოვანი უსაფრთხოების ინფორმაცია

• ელექტრომომარაგება: Use only the specified power adapter. Using an incorrect adapter can damage the unit and void your warranty.
• ვენტილაცია: უზრუნველყავით მოწყობილობის გარშემო სათანადო ვენტილაცია. არ დაბლოკოთ ვენტილაციის ღიობები.
• წყალი და ტენიანობა: Do not expose the unit to water, rain, or excessive moisture.
• მომსახურება: ნუ ეცდებით მოწყობილობის დამოუკიდებლად მომსახურებას. ყველა სახის მომსახურება კვალიფიციურ სერვის პერსონალს მიანდეთ.
• განთავსება: შემთხვევითი დაცემის თავიდან ასაცილებლად, მოწყობილობა მოათავსეთ სტაბილურ, ბრტყელ ზედაპირზე.

3. პაკეტის შიგთავსი

გთხოვთ, შეამოწმოთ, რომ თქვენი პაკეტი შეიცავს შემდეგ ნივთებს:

• DigiTech IPB10 Guitar Floor Multi-Effects Pedalboard
• დენის ადაპტერი
• USB Cable (for firmware updates)
• სწრაფი დაწყების სახელმძღვანელო (არ შედის ამ ციფრულ სახელმძღვანელოში)

Note: An Apple iPad is required for full functionality and is not included with the IPB10.

4. დაყენება

4.1 ფიზიკური კავშირები

1. Connect Guitar: შეაერთეთ თქვენი გიტარა გიტარის შეყვანა jack on the IPB10.
2. დაკავშირება Ampლიფიერი/მიქსერი: დააკავშირეთ გამომავალი of the IPB10 to your guitar amplifier, mixer, or audio interface. Use appropriate cables (e.g., 1/4-inch instrument cables).
3. დაკავშირება ძალა: Plug the supplied power adapter into the დენის შეყვანა on the IPB10, then into a suitable AC outlet.
4. iPad-ის ჩასმა: Carefully place your compatible iPad into the designated dock on the IPB10. Ensure the 30-pin connector aligns correctly.

   მნიშვნელოვანი შენიშვნა: The IPB10 features a 30-pin connector for iPad integration. Newer iPad models with Lightning connectors will require a 30-pin to Lightning adapter. Due to the physical design of the IPB10's dock, some adapters may not fit properly. An extension cable for the Lightning connector might be necessary for newer iPads. The iPad is primarily used for configuration; the IPB10 can operate independently once programmed.

4.2 პროგრამული უზრუნველყოფის ინსტალაცია და პროგრამული უზრუნველყოფის განახლება

1. Install iPB-10 App: Download and install the official DigiTech iPB-10 app from the Apple App Store onto your iPad.
2. შეამოწმეთ პროგრამული უზრუნველყოფის განახლებები: Connect the IPB10 to your computer using the supplied USB cable. Visit the DigiTech support website to download the latest firmware update utility and instructions for your IPB10. It is crucial to perform firmware updates as recommended for optimal performance and compatibility.

5. საოპერაციო ინსტრუქციები

სურათი 1: დასრულდაview of the DigiTech IPB10 Guitar Floor Multi-Effects Pedal. This image displays the entire pedalboard, including the central iPad dock, the five footswitches labeled A through E on the upper row, the five footswitches labeled 1 through 5 on the lower row, the STOMP and AMP toggle switches, the UP and DOWN bank switches, and the integrated expression pedal on the right. The iPad screen shows a graphical representation of various effects pedals.

5.1 ჩართვა და პირველადი გამოყენება

Once all connections are made and the iPad is docked, power on the IPB10. The iPad app should automatically detect the pedalboard.

5.2 Understanding the Interface

• iPad Display: The iPad serves as the primary visual interface, allowing you to drag and drop effects, adjust parameters, and manage presets.
  

  სურათი 2: Detail of the iPad display area on the IPB10. The screen shows a graphical user interface with virtual stompboxes (e.g., Overdrive, Delay, Reverb) arranged in a signal chain, along with controls for amp and cabinet simulation. This is where users interact with the software to design their pedalboards.

• Footswitches (A-E, 1-5): These ten footswitches allow you to activate/deactivate individual effects or recall specific presets. Their function is assigned within the iPB-10 app.
  

  სურათი 3: Detail of the lower-left footswitches on the IPB10. This image highlights footswitches A and B from the upper row, and footswitches 1 and 2 from the lower row. Each footswitch has an associated LED indicator. These are used for engaging effects or selecting presets.
• STOMP/AMP გადამრთველების გადართვა: These dedicated switches allow for quick toggling of stompbox effects and ampმაყუჩების მოდელები.
  

  სურათი 4: Detail of the STOMP and AMP toggle switches located on the upper-left side of the IPB10. These switches provide direct control over the stompbox and amplifier sections of the virtual pedalboard.

• UP/DOWN Bank Switches: Use these switches to navigate through different banks of presets.
  

  სურათი 5: Detail of the UP and DOWN bank switches on the upper-right side of the IPB10. These switches are used to scroll through different banks of stored presets, allowing access to a wider range of sounds during live performance.

• გამოხატვის პედლები: The integrated expression pedal can be assigned to control various effect parameters (e.g., Wah, Volume, Delay feedback) within the iPB-10 app.
  

  სურათი 6: Detail of the integrated expression pedal on the right side of the IPB10. The pedal features a textured metal surface with black rubber grips and the DigiTech logo. This pedal provides real-time control over various effect parameters.

5.3 Creating and Editing Pedalboards

The iPB-10 app allows you to design custom pedalboards by dragging and dropping up to 10 different pedals, an amplifier, and a cabinet into your signal chain.

• ეფექტების არჩევა: Browse the library of 87 pedals, 54 amps, and 26 cabinets.
• Arrange Signal Chain: Drag and drop components to arrange them in any desired order.
• პარამეტრების კორექტირება: Tap on any virtual pedal, amp, or cabinet to access and adjust its parameters (knobs, switches) directly on the iPad screen.
• Assign Footswitches: Assign specific effects or entire pedalboard configurations to the physical footswitches for quick access during performance.

5.4 წინასწარ დაყენებული პარამეტრების შენახვა და გამოძახება

The IPB10 allows you to save an infinite number of custom pedalboard configurations as presets within the app. 100 of these presets can be made accessible via the footswitches.

• დაზოგე წინასწარ: Use the app's interface to save your current pedalboard configuration.
• წინასწარ დაყენების გახსენება: Use the UP/DOWN bank switches and the A-E/1-5 footswitches to recall saved presets.

6. მოვლა

• დასუფთავება: Use a soft, dry cloth to clean the exterior of the IPB10. Do not use abrasive cleaners or solvents.
• პროგრამული განახლებები: Regularly check the DigiTech website and the Apple App Store for updates to the IPB10 firmware and the iPB-10 app. Keeping your software updated ensures optimal performance and access to new features or bug fixes.
• შენახვა: When not in use for extended periods, store the IPB10 in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Დიაგნოსტიკა

8. სპეციფიკაციები

9. ინფორმაცია გარანტიის შესახებ

The DigiTech IPB10 is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official DigiTech website for detailed information regarding warranty terms, conditions, and registration. Keep your proof of purchase for warranty claims.

10. მომხმარებელთა მხარდაჭერა

For technical assistance, product inquiries, or service, please contact DigiTech customer support.

• Webსაიტი: Visit the official DigiTech website for FAQs, firmware downloads, and support resources.
• კონტაქტი: Refer to the "Contact Us" section on the DigiTech website for phone numbers or email support options.