Eurodib HBS-250L Manual 10" Meat Slicer User Manual

1. შესავალი და მეტიview

The Eurodib HBS-250L is a robust and efficient manual meat slicer designed for professional use. Featuring a 10-inch blade, this belt-driven slicer is constructed from durable anodized aluminum, ensuring longevity and ease of cleaning. It is equipped with a built-in blade sharpener, a Perspex protector guard for safety, and a waterproof emergency shut-off switch. This appliance is ideal for slicing various meats with adjustable thickness from 0.2mm to 15mm.

სურათი 1: Eurodib HBS-250L Manual 10" Meat Slicer. This image shows the full view of the meat slicer, highlighting its stainless steel construction, the 10-inch blade, the food carriage, and the thickness adjustment knob.

2. უსაფრთხოების მნიშვნელოვანი ინსტრუქციები

Please read all instructions carefully before operating the meat slicer. Failure to follow these instructions may result in serious injury or damage to the appliance.

• მკვეთრი დანა: The blade is extremely sharp. Always exercise extreme caution when handling, cleaning, or sharpening the blade. Keep hands clear of the blade at all times.
• ელექტრო უსაფრთხოება: Ensure the power supply matches the appliance's requirements (120V). Do not operate with a damaged cord or plug. Keep the appliance away from water and do not immerse it.
• პირადი დამცავი მოწყობილობა: It is recommended to wear cut-resistant gloves when cleaning or handling the blade.
• სტაბილური ზედაპირი: Always operate the slicer on a stable, level, and non-slip surface.
• საკვების მიმწოდებელი: Always use the food pusher to hold food items. Never use your bare hands to push food towards the blade.
• ბავშვები და არაავტორიზებული მომხმარებლები: Keep the appliance out of reach of children and ensure only trained personnel operate it.
• საგანგებო გამორთვა: Familiarize yourself with the location and operation of the emergency shut-off switch.
• გამორთეთ, როდესაც არ იყენებთ: Always unplug the slicer from the power outlet before cleaning, maintenance, or when not in use.

3. რა არის ყუთში

Upon unpacking, please verify that all components are present and undamaged.

• Eurodib HBS-250L Meat Slicer (Main Unit)

შენიშვნა: The meat slicer comes fully assembled with the 10-inch blade, blade sharpener, Perspex protector guard, and food carriage.

4. დაყენება

1. შეფუთვა: ფრთხილად ამოიღეთ საჭრელი შეფუთვიდან. შეინახეთ შეფუთვა მომავალი შენახვის ან ტრანსპორტირებისთვის.
2. განთავსება: Place the slicer on a sturdy, level, and non-slip countertop or table. Ensure there is adequate space around the unit for safe operation and cleaning.
3. პირველადი გაწმენდა: პირველი გამოყენების წინ გაწმინდეთ ყველა ნაწილი, რომელიც საკვებთან შეხებაში მოვა. დეტალური ინსტრუქციისთვის იხილეთ „მოვლა და გაწმენდა“ განყოფილება.
4. დენის კავშირი: Ensure the slicer's power switch is in the "OFF" position. Plug the power cord into a grounded 120V electrical outlet.

5. საოპერაციო ინსტრუქციები

1. Საჭმლის მომზადება: Place the item to be sliced (e.g., meat) onto the food carriage. Secure it firmly against the back plate and use the food pusher to hold it in place.
2. ჭრის სისქის რეგულირება: Use the thickness adjustment knob, located on the side of the slicer, to set the desired slice thickness. The range is from 0.2mm (very thin) to 15mm (thick). Turn the knob clockwise for thicker slices and counter-clockwise for thinner slices.
3. ჩართვა: Turn the slicer on using the power switch. The blade will begin to rotate.
4. დაჭრა: While holding the food pusher firmly, gently push the food carriage back and forth, guiding the food against the rotating blade. The sliced food will fall onto the receiving tray (not included, but typically placed below).
5. უსაფრთხოების მახასიათებლები: The Perspex protector guard is designed to prevent accidental contact with the blade. Always ensure it is properly positioned during operation. In case of emergency, press the red emergency shut-off switch to immediately stop the blade.
6. Გამორთვა: Once slicing is complete, turn off the slicer using the power switch and unplug it from the outlet before cleaning or leaving unattended.

დანა სიმკვეთრე

The HBS-250L features an integrated blade sharpener to maintain optimal slicing performance.

1. უსაფრთხოება პირველ რიგში: Ensure the slicer is unplugged before attempting to sharpen the blade.
2. Position Sharpener: Locate the blade sharpener assembly, typically positioned above the blade. Follow the specific instructions for engaging the sharpening stones. This usually involves lifting or rotating the sharpener into position so the stones make contact with the blade.
3. სიმკვეთრის პროცესი: With the sharpener engaged, briefly turn on the slicer for a few seconds (e.g., 5-10 seconds). Do not over-sharpen.
4. Deburring: Some sharpeners have a separate deburring stone. If applicable, engage the deburring stone and run the slicer for 1-2 seconds to remove any burrs from the blade edge.
5. სუფთა დანა: After sharpening, carefully clean the blade to remove any metal particles. Refer to the cleaning instructions.

6. მოვლა და დასუფთავება

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your meat slicer.

• ყოველთვის გამორთეთ დენის წყაროდან: Before any cleaning or maintenance, always ensure the slicer is unplugged from the power outlet.
• დანის გაწმენდა: The blade is extremely sharp. Use cut-resistant gloves. Carefully wipe down both sides of the blade with a damp cloth and mild detergent. Do not immerse the blade or the entire unit in water.
• ერთეულის გაწმენდა: Wipe down the body of the slicer, food carriage, and other surfaces with a damp cloth and mild, food-safe detergent. Rinse with a clean damp ქსოვილი და კარგად გააშრეთ.
• Food Pusher and Guard: Remove and clean the food pusher and Perspex guard separately with warm soapy water. Rinse and dry completely before reattaching.
• პროდუქტის მოვლის ინსტრუქციები: მხოლოდ ხელით რეცხვა. არ მოათავსოთ ნაწილები ჭურჭლის სარეცხ მანქანაში.
• შეზეთვა: Periodically, apply food-grade lubricant to moving parts as indicated in the detailed product manual (if applicable, general slicer maintenance).

7. Დიაგნოსტიკა

8. სპეციფიკაციები

9. გარანტია და მხარდაჭერა

For warranty information, technical support, or service inquiries regarding your Eurodib HBS-250L Meat Slicer, please contact Eurodib customer service directly.

Please have your model number (HBS-250L) and purchase information ready when contacting support.

მწარმოებელი: Eurodib
Webსაიტი: www.eurodib.com (შენიშვნა: ეს არის ჩანაცვლების ველი URL, please refer to official Eurodib documentation for actual contact details.)