A&D Waterproof Interval Timer AD-5709TL User Manual

1. შესავალი

მადლობა შენაძენისთვისasing the A&D Waterproof Interval Timer AD-5709TL. This versatile timer is designed for various applications, from kitchen use to sports training, offering precise timing and robust features. Its IPX7 waterproof rating ensures durability in wet environments, while its multi-timer and repeat functions provide flexibility for complex timing needs. Please read this manual carefully to ensure proper use and maintenance of your device.

სურათი 1.1: წინა view of the A&D Waterproof Interval Timer AD-5709TL, displaying its digital screen and control buttons.

2. ძირითადი მახასიათებლები

• IPX7 Fully Waterproof: Designed to withstand splashes and submersion, ideal for kitchen and outdoor use.
• მრავალტაიმერის ფუნქცია: Capable of memorizing and running up to 8 individual timer settings sequentially.
• გამეორების ფუნქცია: Set the timer to repeat from 1 to 999 times, or for an indefinite duration.
• ორმაგი განგაშის შეტყობინება: Alerts with both a red LED light (blinks for approx. 30 seconds) and a buzzer sound (5 or 30 seconds duration).
• Countdown & Count-up Modes: Functions as a countdown timer for set intervals and a count-up timer from zero.
• მეხსიერების ფუნქცია: Stores frequently used timer settings for quick recall.
• მაგნიტური საყრდენი: Equipped with a magnet for convenient attachment to metal surfaces.

Figure 2.1: The timer's magnetic backing allows for easy attachment to metal surfaces, as shown with paper clips.

Figure 2.2: The timer is shown submerged in water, highlighting its IPX7 waterproof rating for use in wet environments.

3. დაყენება

3.1. პაკეტის შიგთავსი

• A&D Waterproof Interval Timer AD-5709TL
• ინსტრუქციის სახელმძღვანელო
• CR2032 Lithium Battery (for monitor use)

3.2. ბატარეის მონტაჟი

The timer uses one CR2032 lithium battery. A battery is included for initial monitoring purposes. For long-term use, it is recommended to replace it with a new battery.

1. იპოვეთ ბატარეის განყოფილება ტაიმერის უკანა მხარეს.
2. Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
3. ჩადეთ CR2032 აკუმულატორი დადებითი (+) მხარით ზემოთ.
4. დაახურეთ ბატარეის საფარი და დაამაგრეთ საათის ისრის მიმართულებით.

სურათი 3.1: უკანა view of the timer, illustrating the battery compartment and the CR2032 battery for installation.

3.3. პირველადი ჩართვა

Once the battery is correctly installed, the timer will automatically power on and display '00:00'.

4. ოპერაცია

4.1. ღილაკის ფუნქციები

4.2. Setting a Countdown Timer

1. Ensure the timer display is '00:00'. If not, press the გაჩერდი ღილაკი გადატვირთვისთვის.
2. გამოიყენეთ 1分, 10秒, და 10分 buttons to set your desired countdown time. The maximum setting is 99 minutes 50 seconds, and the minimum is 10 seconds.
3. დააჭირეთ スタート/ポーズ ღილაკი უკუთვლის დასაწყებად.
4. უკუთვლის შესაჩერებლად, დააჭირეთ スタート/ポーズ კიდევ ერთხელ დააჭირეთ. გასაგრძელებლად კიდევ ერთხელ.
5. When the timer reaches zero, the alarm will sound (buzzer for 5 or 30 seconds) and the red LED will blink for approximately 30 seconds.
6. დააჭირეთ გაჩერდი button to silence the alarm and reset the timer to the last set time.

4.3. Using Multiple Timers (Sequential Operation)

The AD-5709TL can store and run up to 8 sequential timer settings. This is ideal for interval training or multi-step processes.

1. Set the first timer duration using the 1分, 10秒, და 10分 ღილაკები.
2. დააჭირეთ メモリ button to save this setting as Step 1. The display will show '00:00' or the next step number.
3. Repeat the process to set and save up to 8 steps. Each time you press メモリ, it saves the current setting and moves to the next step number.
4. Once all steps are set, press スタート/ポーズ to begin the sequence. The timer will count down each step consecutively.
5. The alarm will sound after each step completes, and the timer will automatically proceed to the next step.

სურათი 4.1: მაგample of sequential timer operation with multiple steps and repeat functionality.

4.4. გამეორება ფუნქცია

After setting your sequential timers (or a single timer), you can set the number of times the sequence should repeat.

1. After setting your timer steps (as described in 4.3), press the メモリ button repeatedly until the display shows the repeat count setting (e.g., 'RPT 001').
2. გამოიყენეთ 1分, 10秒, და 10分 buttons to adjust the repeat count from 1 to 999.
3. To set for permanent (infinite) repeat, continue pressing the buttons until 'RPT INF' or similar is displayed.
4. დააჭირეთ スタート/ポーズ to start the repeating timer sequence.

4.5. Count-up Function

To use the count-up function:

1. Ensure the timer display is '00:00'.
2. დააჭირეთ スタート/ポーズ button. The timer will immediately start counting up from 00 minutes 00 seconds.
3. დააჭირეთ スタート/ポーズ again to pause the count-up.
4. დააჭირეთ გაჩერდი button to stop the count-up and reset the display to '00:00'.

5. მოვლა

5.1. დასუფთავება

ტაიმერის გასაწმენდად, გაწმინდეთ იგი რბილი ქსოვილითamp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water beyond its IPX7 rating. Ensure the battery compartment is securely closed before cleaning with moisture.

5.2. ბატარეის გამოცვლა

When the display becomes dim or the timer functions erratically, it's time to replace the battery. Follow the steps in Section 3.2 for battery installation. Always use a new CR2032 lithium battery.

5.3. შენახვა

Store the timer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

6. Დიაგნოსტიკა

7. სპეციფიკაციები

Figure 7.1: Visual representation of the timer's dimensions, weight, battery information, and alarm features.

8. გარანტია და მხარდაჭერა

This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or inquiries, please contact A&D customer service through their official website or the retailer from whom you purchased the product. Please retain your proof of purchase for warranty validation.

For more information, visit the official A&D webსაიტი: www.aandd.co.jp