პროფლო PF42872

PROFLO PF42872 2-inch PVC Offset Shower Drain User Manual

მოდელი: PF42872

შესავალი

Thank you for choosing the PROFLO PF42872 2-inch PVC Offset Shower Drain. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new shower drain. Please read these instructions thoroughly before beginning installation and retain them for future reference.

PROFLO PF42872 2-inch PVC Offset Shower Drain with chrome grate and PVC body

Image: The PROFLO PF42872 2-inch PVC Offset Shower Drain, showing the PVC drain body and the removable chrome-finished grate.

უსაფრთხოების ინფორმაცია

ინსტალაციისა და გამოყენებისას გთხოვთ, დაიცვათ შემდეგი უსაფრთხოების ზომები:

პაკეტის შიგთავსი

The PROFLO PF42872 package includes the following components:

Note: Additional plumbing materials, tools, and shower pan components are sold separately.

ინსტალაციის ინსტრუქციები

This section outlines the general steps for installing the PROFLO PF42872 shower drain. Specific details may vary based on your shower pan and plumbing configuration.

საჭირო ინსტრუმენტები და მასალები (არ შედის):

ნაბიჯ-ნაბიჯ ინსტალაცია:

  1. შხაპის ტაფის მომზადება: Ensure the shower pan opening is clean and correctly sized for a 2-inch drain. The offset design allows for flexibility in drain placement relative to the subfloor opening.
  2. Dry Fit Components: Before applying any adhesives, dry fit the drain body into the shower pan opening and connect it to the existing 2-inch PVC waste pipe to ensure proper alignment and fit.
  3. წაისვით გამწმენდი: Apply a bead of sealant (e.g., plumber's putty or silicone, as recommended by your shower pan manufacturer) around the underside of the drain flange that will sit on the shower pan.
  4. Secure Drain Body: Insert the drain body into the shower pan opening. From underneath the shower pan, secure the drain body to the shower pan according to the shower pan manufacturer's instructions. This typically involves tightening a large nut or ring. Ensure a watertight seal.
  5. Connect to Waste Pipe: Apply PVC primer to the outside of the 2-inch waste pipe and the inside of the drain body's outlet. Then, apply PVC solvent cement to both surfaces and firmly join the drain body to the waste pipe. Hold in place for a few seconds to allow the cement to set.
  6. ტესტი გაჟონვისთვის: Once the solvent cement has cured (refer to cement manufacturer's instructions for curing time), temporarily block the drain opening and fill the shower pan with water to check for any leaks around the drain connection.
  7. Install Grate: Once all connections are secure and leak-free, place the chrome grate into the drain opening. Secure it with the provided screws using a screwdriver.

მოვლა

Regular maintenance will help ensure the longevity and proper function of your PROFLO shower drain.

პრობლემების მოგვარება

პრობლემაშესაძლო მიზეზიგამოსავალი
ნელი დრენაჟიHair or debris accumulation; partial clog in waste pipe.Remove grate and clean drain body. Use a drain snake if the clog is deeper. Avoid pouring grease down the drain.
წყლის გაჟონვა დრენაჟის გარშემოImproperly sealed drain flange; loose connection to waste pipe.Ensure drain flange is properly sealed to the shower pan. Check PVC solvent weld connection for integrity. Re-seal or re-connect if necessary.
Unpleasant Odor from DrainDry P-trap; debris buildup; sewer gas.Run water to fill the P-trap. Clean the drain thoroughly. If odor persists, consult a plumber.

სპეციფიკაციები

მოდელის ნომერი:PF42872
ბრენდი:პროფლო
სანიაღვრე ზომა:2 ინჩი
მასალა:Polyvinyl Chloride (PVC) body, Chrome finish grate
პროდუქტის ზომები:2"W x 2"H (referring to the drain opening/connection size)
განსაკუთრებული თვისება:Removable grate, Offset design
ნივთის წონა:12.3 უნცია
UPC:781889133996

გარანტია და მხარდაჭერა

For specific warranty information and customer support, please refer to the PROFLO official webსაიტზე ან პირდაპირ დაუკავშირდით მათ მომხმარებელთა მომსახურების განყოფილებას. შეინახეთ თქვენი შესყიდვის ქვითარი შეძენის დასადასტურებლად.

PROFLO-ს მომხმარებელთა მომსახურება: გთხოვთ ეწვიოთ the PROFLO Store on Amazon or the official PROFLO webსაიტი საკონტაქტო დეტალებისთვის.

დაკავშირებული დოკუმენტები - PF42872

წინასწარიview PROFLO PF644 PVC კაბელის დრენაჟი და გადმოდინება - სპეციფიკაციები და მახასიათებლები
PROFLO PF644 PVC საკაბელო დრენაჟისა და გადმოდინების სისტემის დეტალური სპეციფიკაციები, პროდუქტის მახასიათებლები, მოდელის ნომრები (PF644CP, PF644ZBN) და გარანტიის ინფორმაცია. მოიცავს ზომებს და აბაზანების ინსტალაციის თავსებადობას.
წინასწარიview PROFLO PF101PNC შხაპის სადრენაჟე სისტემის დამონტაჟების ინსტრუქცია
PROFLO PF101PNC საშხაპე სადრენაჟე სისტემის ყოვლისმომცველი ინსტალაციის სახელმძღვანელო, დეტალური მონტაჟი, მნიშვნელოვანი სიფრთხილის ზომები და გარანტიის ინფორმაცია. ოპტიმალური მუშაობისთვის უზრუნველყავით სათანადო ინსტალაცია.
წინასწარიview PROFLO PF418G ორსახელურიანი საშხაპე ონკანი - სპეციფიკაციები და მახასიათებლები
დეტალური სპეციფიკაციები, მახასიათებლები და გარანტიის ინფორმაცია PROFLO PF418G ორსახელურიანი უნივერსალური საშხაპე ონკანისთვის ქრომში. მოიცავს ზომებს, შესაბამისობის დეტალებს (WaterSense, ADA, IAPMO) და გარანტიის პირობებს. გავრცელებულია Ferguson-ისა და Wolseley Canada-ს მიერ.
წინასწარიview ProFlo ACCUFIT წნევის დაბალანსების აბაზანისა და შხაპის დაყენების სახელმძღვანელო
ProFlo ACCUFIT წნევის ბალანსის აბაზანისა და შხაპის სისტემის ყოვლისმომცველი ინსტალაციის, მოვლისა და ტექნიკური მომსახურების ინსტრუქციები. მოიცავს სარქვლის შეერთებას, ინსტალაციის ეტაპებს, ტემპერატურის ლიმიტის რეგულირებას, შეკეთების პროცედურებს და გარანტიის ინფორმაციას PF3001 და MIR3001 სერიის მოდელებისთვის.
წინასწარიview PROFLO PF8830G სერიის ORRS ერთსახელურიანი აბაზანისა და შხაპის მორთვების ნაკრების სპეციფიკაციები
PROFLO PF8830G სერიის ORRS ერთსახელურიანი აბაზანისა და შხაპის მორთვების ნაკრების დეტალური სპეციფიკაციები. მოიცავს მახასიათებლებს, ხელმისაწვდომ დამუშავებას (ქრომი, გაპრიალებული ნიკელი, მქრქალი შავი), ზომებს, გარანტიის ინფორმაციას და შესაბამისობის სტანდარტებს.
წინასწარიview PROFLO PFLL51MCP წნევის დაბალანსების საშხაპე ონკანის ნაწილების დაშლა და ინსტრუქცია
PROFLO PFLL51MCP წნევის დაბალანსების საშხაპე ონკანის დეტალური დეტალების და საგარანტიო ინფორმაცია, მათ შორის მოდელის ნომრები, კომპონენტების აღწერილობები და შესაბამისობის სტანდარტები.