1. შესავალი
This manual provides essential instructions for the safe and effective use of your NEO TOOLS Front Stripping Pliers, Model 01-500. Please read this manual thoroughly before operating the tool and retain it for future reference. This tool is designed for stripping insulation from electrical wires and for cutting wires.
სურათი 1.1: დასრულდაview of the NEO TOOLS Front Stripping Pliers 01-500.
2. უსაფრთხოების ინფორმაცია
Always prioritize safety when working with tools, especially electrical tools. Failure to follow these safety guidelines may result in injury or damage to the tool or property.
- თვალის დაცვა: Always wear appropriate eye protection (safety glasses or goggles) to prevent injury from flying debris.
- იზოლირებული სახელურები: The pliers feature bi-material handles designed for a secure grip. However, these pliers are not rated for live electrical work unless explicitly stated as VDE 1000V certified. Always ensure power is disconnected before working on electrical circuits.
- სათანადო გამოყენება: Use the tool only for its intended purpose: stripping and cutting electrical wires. Do not use it as a hammer, pry bar, or for other unintended applications.
- ინსტრუმენტის მოვლა: Keep the tool clean and in good working condition. Inspect for damage before each use. Do not use if damaged.
- ბავშვები და გამვლელები: ხელსაწყოს მუშაობისას მოარიდეთ ბავშვები და მნახველები.
This product is TÜV Rheinland certified, indicating compliance with relevant safety standards.
Image 2.1: TÜV Rheinland Certified logo.
3. პროდუქტი დასრულდაview და კომპონენტები
The NEO TOOLS Front Stripping Pliers 01-500 are a versatile hand tool constructed from durable alloy steel (CrV steel) for longevity and performance. Key components include:
- ყბების გაშიშვლება: Front-mounted jaws for precise insulation removal.
- მავთულის საჭრელი: Integrated cutting blade for various wire types.
- Crimping Jaws: Designed for crimping insulated and non-insulated terminals.
- Adjustable Stop: For consistent stripping length.
- დაძაბულობის რეგულირება: Screw for adjusting stripping force based on wire gauge.
- Bi-material Handles: Ergonomically designed for comfort and grip.
Image 3.1: NEO TOOLS Front Stripping Pliers in operation.
4. დაყენება
The pliers require minimal setup. Before first use, familiarize yourself with the adjustment mechanisms:
- Stripping Length Adjustment: Locate the adjustable stop mechanism. Slide it to the desired length for the insulation you wish to remove. This ensures consistent strip lengths.
- დაძაბულობის რეგულირება: A small screw or dial is typically present to adjust the tension of the stripping jaws. For smaller gauge wires, less tension may be required to prevent damage to the conductor. For larger gauge wires, more tension ensures a clean strip. Test on a scrap piece of wire first.
5. საოპერაციო ინსტრუქციები
ეფექტური და უსაფრთხო მუშაობისთვის, მიჰყევით ამ ნაბიჯებს:
5.1. მავთულის გაშიშვლება
- Select Wire: Identify the wire to be stripped and its gauge. The pliers are suitable for 22-10 AWG (0.2-6 mm²) wires.
- პოზიციონირების მავთული: Open the pliers and insert the wire into the stripping jaws. Ensure the wire is seated correctly and the insulation is aligned with the adjustable stop (if used).
- Squeeze Handles: Firmly squeeze the handles together. The jaws will grip the insulation, cut it, and then pull it away from the conductor.
- გამოშვება: Release the handles to free the stripped wire. Inspect the conductor for any nicks or damage. If damage occurs, adjust the tension and re-strip.
5.2. მავთულის ჭრა
The integrated wire cutter is located on the pliers.
- პოზიციონირების მავთული: Place the wire to be cut into the designated cutting area of the pliers.
- Squeeze Handles: მავთულის გასაჭრელად მჭიდროდ მოუჭირეთ სახელურებს.
5.3. Crimping
The pliers include crimping jaws for insulated and non-insulated terminals.
- Select Terminal: Choose the appropriate terminal for your wire gauge.
- Insert Terminal: Place the terminal into the correct crimping slot on the pliers.
- მავთულის ჩასმა: ჩადეთ გაშიშვლებული მავთული ტერმინალში.
- Crimp: Squeeze the handles firmly until the crimp is complete.
6. მოვლა
Regular maintenance ensures the longevity and optimal performance of your pliers.
- დასუფთავება: After each use, wipe the pliers clean with a dry cloth to remove any dust, dirt, or wire fragments. For stubborn grime, a mild solvent can be used, ensuring it does not damage the handle material.
- შეზეთვა: პერიოდულად წაუსვით მცირე რაოდენობით მსუბუქი ზეთი საყრდენ წერტილებსა და მოძრავ ნაწილებს, რათა უზრუნველყოთ შეუფერხებელი მუშაობა და თავიდან აიცილოთ ჟანგი.
- შენახვა: Store the pliers in a dry environment to prevent corrosion. Keep them away from direct sunlight and extreme temperatures.
- ინსპექტირება: Regularly inspect the jaws for wear, damage, or misalignment. Ensure the cutting edges are sharp and free from nicks.
7. Დიაგნოსტიკა
If you encounter issues with your pliers, refer to the following common problems and solutions:
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| Wire insulation not stripping cleanly. | Incorrect tension setting; dull jaws; wrong wire gauge. | Adjust tension screw; inspect jaws for wear; ensure correct wire gauge is used. |
| Wire conductor is nicked or cut during stripping. | Too much tension; incorrect wire gauge; wire not centered. | Reduce tension; verify wire gauge; ensure wire is centered in jaws. |
| Pliers feel stiff or difficult to operate. | შეზეთვის ნაკლებობა; მექანიზმში ჭუჭყი/ნამსხვრევები. | Clean pliers and apply light machine oil to pivot points. |
| Wire cutter is not cutting effectively. | Dull cutting edge; attempting to cut material too hard for the tool. | Inspect cutting edge for damage; ensure only appropriate wires are cut. |
8. სპეციფიკაციები
- მოდელის ნომერი: 01-500 წწ
- ბრენდი: NEO ინსტრუმენტები
- სიგრძე: 205 მმ
- მასალა: Alloy Steel (CrV Steel)
- მავთულის გაშიშვლების ტევადობა: 22-10 AWG (0.2-6 მმ²)
- Hardness (Stripping Jaws): 52-57 HRC
- ზომები (L x W x H): 27 x 14 x 3.5 სმ
- წონა: 320 გრამი
- სერთიფიკატები: TÜV Rheinland-ის სერტიფიცირებული
Image 8.1: Indication of 22-10 AWG wire stripping capacity.
Image 8.2: Indication of 52-57 HRC hardness for the stripping jaws.
Image 8.3: Indication of CrV Steel material.
9. გარანტია და მხარდაჭერა
NEO TOOLS provides a 25-year guarantee for this product, reflecting its commitment to quality and durability. For warranty claims, technical support, or further inquiries, please refer to the contact information provided with your purchase or visit the official NEO TOOLS webსაიტი.
Image 9.1: 25 Years Guarantee logo.
