შესავალი
This instruction manual provides detailed guidance for the proper installation, safe operation, and routine maintenance of the Riello 40 G3B Oil Pump. Adhering to these instructions will ensure optimal performance and longevity of the unit. Please read this manual thoroughly before attempting any installation or operation.
უსაფრთხოების ინფორმაცია
Always prioritize safety when working with heating systems and fuel pumps. Failure to follow safety guidelines can result in serious injury, property damage, or death.
- Ensure all power to the burner system is disconnected before installation, maintenance, or troubleshooting.
- მონტაჟი და მომსახურება უნდა განხორციელდეს მხოლოდ კვალიფიციური და უფლებამოსილი პერსონალის მიერ.
- გამოიყენეთ შესაბამისი პირადი დამცავი აღჭურვილობა (PPE), მათ შორის ხელთათმანები და თვალის დამცავი.
- Handle fuel with extreme care. Avoid spills and ensure adequate ventilation.
- Refer to local codes and regulations for proper installation and safety procedures.
დაყენება და ინსტალაცია
The Riello 40 G3B Oil Pump (Part Number 20031996) is designed for use with Riello 40 G3B, G5, and G10 burners. It is compatible with gas oil, kerosene, and a 20% blend of biofuel.
წინასწარი ინსტალაციის შემოწმება:
- Verify that the pump model matches the requirements of your burner system.
- Inspect the pump for any signs of damage during shipping.
- დარწმუნდით, რომ ყველა საჭირო ინსტრუმენტი და შესაკრავი ხელმისაწვდომია.
ინსტალაციის ნაბიჯები:
- გამორთეთ ელექტროენერგია: Turn off the main power supply to the burner and heating system.
- Remove Old Pump (if applicable): Carefully disconnect fuel lines and mounting bolts from the existing pump. Be prepared for fuel spills and have absorbent materials ready.
- ახალი ტუმბოს დამონტაჟება: Secure the Riello 40 G3B pump to the burner assembly using appropriate fasteners. Ensure a stable and vibration-free mounting.
- საწვავის მილების შეერთება: Attach the fuel supply and return lines to the designated ports on the pump. Ensure all connections are tight and leak-free. Refer to the burner's specific diagram for correct port identification.
- ელექტრული კავშირები: Connect the electrical wiring according to the burner manufacturer's instructions. Double-check all connections for correctness and security.
- Bleed System: After installation, the fuel system may need to be bled to remove air. Follow the burner manufacturer's procedure for bleeding the oil line.
სურათი 1: წინა view of the Riello 40 G3B Oil Pump. This image shows the main body of the pump, including the drive shaft, mounting plate, and fuel line connections. The model number and other identifying marks are visible on the pump's face.
ოპერაციული ინსტრუქციები
The Riello 40 G3B Oil Pump is an automatic pump designed to supply fuel to the burner at the required pressure. Its operation is integrated with the burner's control system.
- ავტომატური ოპერაცია: The pump activates and deactivates automatically in response to the burner's demand for fuel.
- Pre-ventilation Safety Feature: The pump incorporates a safety feature that prevents pressure in the hydraulic circuit during the pre-ventilation phase of the burner cycle. This ensures safe ignition.
- Fuel Compatibility: Ensure that the fuel being used (gas oil, kerosene, or up to 20% biofuel blend) is appropriate for both the pump and the burner system.
For detailed operational sequences, refer to the specific instruction manual for your Riello burner model.
მოვლა
Regular maintenance is crucial for the reliable operation and longevity of your Riello oil pump. Always ensure the power supply is disconnected before performing any maintenance.
- საწვავის ფილტრის შეცვლა: Periodically check and replace the fuel filter (if applicable to your system) to prevent contaminants from reaching the pump. Consult your burner manual for recommended intervals.
- სისტემის შემოწმება: Annually inspect all fuel lines and connections for leaks, cracks, or signs of wear. Tighten any loose connections.
- საქშენის გაწმენდა/შეცვლა: While not directly part of the pump, a clean nozzle is essential for efficient fuel delivery. Follow burner manufacturer guidelines for nozzle maintenance.
- პროფესიონალური სერვისი: It is recommended to have the entire heating system, including the oil pump, serviced annually by a qualified technician.
პრობლემების მოგვარება
This section provides general troubleshooting tips. For complex issues, contact a qualified service technician.
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| საწვავი ვერ აანთებს | No fuel supply, air in fuel line, clogged filter, faulty pump. | Check fuel tank level. Bleed fuel line. Replace fuel filter. Inspect pump for damage (professional service recommended). |
| Burner cycles on and off rapidly | Inconsistent fuel pressure, air in system, dirty nozzle. | Check for air leaks in fuel lines. Clean or replace burner nozzle. Consult technician for pressure adjustment. |
| Oil leak from pump or lines | Loose connections, damaged seals, cracked lines. | Tighten all fuel line connections. Inspect seals and lines for damage. Replace any damaged components immediately. |
სპეციფიკაციები
| ფუნქცია | დეტალი |
|---|---|
| ბრენდი | რიელო |
| მოდელის ნომერი | RBS03 |
| Riello Part Number | 20031996 |
| თავსებადობა | Riello 40 G3B, G5, and G10 burners |
| საწვავის ტიპები | Gas oil, Kerosene, 20% Biofuel blend |
| ტუმბოს ტიპი | ავტომატური |
| მასალა | მეტალი |
| ნივთის წონა | 1.1 კგ |
| პაკეტის ზომები | 13.21 x 12.19 x 9.4 სმ |
| OEM ნაწილის ნომერი | RBS03 |
| გამომავალი კავშირის ტიპი | BSP |
| შესაბამისობა | CE |
საგარანტიო ინფორმაცია
Specific warranty terms for the Riello 40 G3B Oil Pump are typically provided by the manufacturer or the point of purchase. Please retain your proof of purchase. For detailed warranty information, contact your supplier or Riello customer service.
მხარდაჭერა და კონტაქტი
If you require technical assistance, have questions regarding installation, operation, or maintenance, or need to report an issue, please contact the authorized Riello distributor or your original seller. Ensure you have the product model number (RBS03) and part number (20031996) available when seeking support.
For general information about Riello products, you may visit the official Riello webსაიტი: www.riello.com
