GVS SPR492

GVS Elipse SPR492 ABEK1P3 Dust/Vapor Combination Replacement Filters User Manual

1. შესავალი

This user manual provides essential information for the correct installation, use, and maintenance of the GVS Elipse SPR492 ABEK1P3 Dust/Vapor Combination Replacement Filters. These filters are designed to be used exclusively with GVS Elipse SPR491/496 half masks. Adherence to these instructions is crucial for ensuring effective respiratory protection and prolonging the lifespan of your filters.

უსაფრთხოების მნიშვნელოვანი ინფორმაცია: Always refer to the complete GVS Elipse half mask manual for comprehensive safety guidelines, limitations, and proper respirator usage. Do not use these filters in environments with unknown contaminants, oxygen-deficient atmospheres, or immediately dangerous to life or health (IDLH) conditions.

2. პროდუქტი დასრულდაview

The GVS Elipse SPR492 ABEK1P3 filters are a pair of low-profile, lightweight combination filters offering protection against organic gases and vapors (A), inorganic gases and vapors (B), acid gases (E), ammonia and organic ammonia derivatives (K), and solid and liquid particulates (P3). Their compact design ensures comfort and compatibility with other personal protective equipment.

2.1 ძირითადი მახასიათებლები

  • დაბალი პროfile design for enhanced visibility and comfort.
  • Lightweight construction reduces user fatigue.
  • Easy and quick replacement mechanism.
  • ABEK1P3 classification for broad spectrum protection.

2.2 პაკეტის შიგთავსი

  • One (1) pair of GVS Elipse SPR492 ABEK1P3 Combination Replacement Filters.
GVS Elipse SPR492 ABEK1P3 Combination Replacement Filters

Figure 1: GVS Elipse SPR492 ABEK1P3 Combination Replacement Filters. These filters are designed to attach directly to compatible GVS Elipse half masks.

3. დაყენება და ინსტალაცია

Proper installation of the filters is critical for ensuring a secure seal and effective protection. Always handle filters with clean hands.

  1. Inspect Filters: Before each use, visually inspect both filters for any signs of damage, cracks, or deformities. Ensure the filter media is intact and not visibly soiled. Do not use damaged filters.
  2. Prepare Half Mask: Ensure your GVS Elipse SPR491/496 half mask is clean and free from debris. Locate the filter attachment points on both sides of the mask.
  3. Attach Filters: Align the connection point on the filter with the corresponding attachment point on the half mask. Gently push and twist the filter clockwise until it clicks securely into place. Do not overtighten.
  4. Repeat for Second Filter: Attach the second filter to the other side of the half mask following the same procedure.
  5. შეასრულეთ ბეჭდის შემოწმება: After installing both filters, perform a positive and/or negative pressure seal check as described in your GVS Elipse half mask manual. A proper seal is essential for protection. If a proper seal cannot be achieved, do not enter the contaminated area.

4. საოპერაციო ინსტრუქციები

Once the filters are correctly installed and a seal check has been performed, the respirator system is ready for use.

  • Wearing the Respirator: Don the GVS Elipse half mask with the installed SPR492 filters according to the instructions provided with your half mask. Ensure the straps are adjusted for a comfortable yet secure fit, maintaining the face seal.
  • გამოყენებაში: Breathe normally. The filters will remove specified contaminants from the air.
  • Leaving Contaminated Area: If you detect any odor or taste of contaminants, experience increased breathing resistance, or feel dizzy or nauseous, immediately leave the contaminated area and move to fresh air.
  • Არ გამოიყენოთ: These filters are not suitable for protection against gases or vapors with poor warning properties (e.g., odorless, tasteless), or in situations where the concentration of contaminants is unknown or exceeds the filter's capacity.

5. მოვლა

Proper maintenance ensures the longevity and effectiveness of your filters.

5.1 ფილტრის გამოცვლა

  • Particulate Filters (P3): Replace when breathing resistance becomes noticeably high.
  • Gas/Vapor Filters (ABEK1): Replace immediately if you detect any odor or taste of the contaminant, or if irritation occurs. The service life of gas/vapor filters depends on the concentration of contaminants, humidity, temperature, and breathing rate.
  • ზოგადი წესი: Always replace both filters simultaneously. Do not attempt to clean or reuse expired or saturated filters.

5.2 შენახვა

  • Store unused filters in their original, sealed packaging in a cool, dry place, away from direct sunlight and contaminants.
  • After use, if filters are not saturated, they can be stored attached to the half mask in a clean, airtight container to prolong their life, especially for gas/vapor protection.

5.3 დასუფთავება

  • The exterior of the filters can be wiped clean with a damp cloth. Do not immerse filters in water or cleaning solutions, as this can damage the filter media.

6. Დიაგნოსტიკა

ეს განყოფილება განიხილავს გავრცელებულ პრობლემებს, რომლებსაც შეიძლება წააწყდეთ.

  • საკითხი: You detect an odor or taste of contaminants while wearing the respirator.
    გამოსავალი: Immediately leave the contaminated area. Check the fit of your half mask and ensure the filters are securely attached. If the issue persists, replace both filters.
  • საკითხი: Breathing becomes difficult or noticeably restricted.
    გამოსავალი: Immediately leave the contaminated area. This indicates that the particulate filter media may be clogged. Replace both filters.
  • საკითხი: The filters do not seem to attach securely to the half mask.
    გამოსავალი: Ensure you are using compatible GVS Elipse SPR491/496 half masks. Check for any debris or damage on both the filter and mask connection points. Align correctly and twist firmly until a click is heard.

7. სპეციფიკაციები

ატრიბუტიდეტალი
მოდელის ნომერიSPR492
ფილტრის ტიპიABEK1P3 Combination Filter (Organic, Inorganic, Acid Gases, Ammonia, Particulates)
თავსებადობაGVS Elipse SPR491/496 Half Masks
მასალათერმოპლასტიკური
პაკეტის ზომები21.5 x 18.7 x 7.5 სმ
პაკეტის წონა137 გ
მწარმოებელიGVS
GTIN (გლობალური სავაჭრო პუნქტის ნომერი)05060233801015

8. გარანტია და მხარდაჭერა

For specific warranty information regarding your GVS Elipse SPR492 ABEK1P3 filters, please refer to the documentation provided with your purchase or visit the official GVS webსაიტი. შეინახეთ შეძენის დამადასტურებელი საბუთი გარანტიასთან დაკავშირებული ნებისმიერი პრეტენზიისთვის.

For technical support, product inquiries, or further assistance, please contact your authorized GVS dealer or the GVS customer service department. Contact details can typically be found on the GVS official webსაიტი.

დაკავშირებული დოკუმენტები - SPR492

წინასწარიview GVS Elipse Low Profile Combined Gas & Particulate Safety Respirator User Instructions
Comprehensive user instructions for the GVS Elipse low profile combined gas and particulate safety respirator. Covers applications, filter types, fitting, cleaning, maintenance, storage, warnings, limitations, and service life. Essential guide for occupational safety.
წინასწარიview GVS Smart APP V1.4-ის მომხმარებლის სახელმძღვანელო
GVS Smart APP V1.4-ის მომხმარებლის სახელმძღვანელო, რომელშიც დეტალურად არის აღწერილი KNX და მესამე მხარის ჭკვიანი სახლის მოწყობილობების კონტროლი და მართვა, სცენების დაყენება, ხმოვანი ასისტენტების ინტეგრირება და მესამე მხარის სერვისების, მაგალითად SONOS-ის, ავტორიზაცია.
წინასწარიview GVS Gem Series Z10 Smart Home Server User Manual (A-IS03)
User manual for the GVS Gem Series Z10 Smart Home Server (Model A-IS03), detailing its functions, installation, and operation for building intercom and smart home control systems.
წინასწარიview GVS K-BUS KNX Gateway for RS485/RS232 V2.0 User Manual
User manual for the GVS K-BUS KNX Gateway for RS485/RS232 V2.0 (Model BTPG-04/03.1). This document provides technical data, installation, programming, and parameter setting details for integrating Modbus/RS485/RS232 devices with KNX bus systems.
წინასწარიview GVS K-BUS KNX Gateway for RS485/RS232 User Manual V1.8
This user manual provides comprehensive technical details, installation, and programming guidance for the GVS K-BUS KNX Gateway for RS485/RS232 (V1.8). Learn how to integrate Modbus, RS485, and RS232 devices with KNX home and building control systems.
წინასწარიview GVS K-BUS KNX Gateway for Tuya ZigBee V2.1 User Manual
This user manual provides detailed technical information, installation, and programming guidance for the GVS K-BUS KNX Gateway for Tuya ZigBee V2.1, enabling seamless integration between KNX and Tuya ZigBee smart home systems.