Hager ADC810H Residual Current Circuit Breaker with Overcurrent Protection (RCBO) User Manual

1. შესავალი

The Hager ADC810H is a compact and reliable Residual Current Circuit Breaker with Overcurrent Protection (RCBO), designed for the protection of electrical installations against both overcurrents (overload and short-circuit) and earth leakage currents. This device is a bipolar 1P+N unit, suitable for single-phase systems, ensuring enhanced safety and operational flexibility. Its design facilitates easy installation in industrial and domestic environments, providing precise monitoring of differential currents.

2. უსაფრთხოების ინსტრუქციები

WARNING: Electrical work should only be performed by qualified and authorized personnel. Failure to follow these instructions can result in serious injury or death.

• Always disconnect the main power supply before installing, maintaining, or troubleshooting the device.
• უზრუნველყავით ელექტრო სისტემის სათანადო დამიწება.
• Verify that the device ratings (voltage, current, breaking capacity) match the requirements of your electrical installation.
• არ ჩართოთ მოწყობილობა, თუ ის დაზიანებული ჩანს.
• Regularly test the residual current function using the test button.

3. პროდუქტი დასრულდაview

The Hager ADC810H RCBO integrates both overcurrent and residual current protection in a single compact unit. It features a robust housing and clear markings for easy identification and connection.

ეს სურათი წინა მხარეს აჩვენებს view of the Hager ADC810H Residual Current Circuit Breaker with Overcurrent Protection (RCBO). Visible are the toggle switch for manual operation, the test button, and the connection terminals for phase and neutral conductors.

ძირითადი კომპონენტები მოიცავს:

• გადამრთველის გადართვა: For manual ON/OFF operation and indication of trip status.
• ტესტის ღილაკი: Used to periodically test the residual current tripping mechanism.
• კავშირის ტერმინალები: Clearly marked for phase (L) and neutral (N) input and output.
• DIN Rail Mounting Clip: For secure installation on a DIN rail.

4. მონტაჟი

The Hager ADC810H RCBO is designed for DIN rail mounting. Follow these steps for safe and correct installation:

1. დენის გათიშვა: Ensure the main power supply to the installation is completely disconnected and secured against accidental re-connection.
2. მონტაჟი: Clip the RCBO onto the DIN rail in the consumer unit or distribution board. Ensure it is securely seated.
3. Wiring - Input: Connect the incoming phase (L) and neutral (N) conductors to the upper terminals of the RCBO. Ensure correct polarity and tight connections.
4. Wiring - Output: Connect the outgoing phase (L) and neutral (N) conductors to the lower terminals of the RCBO, leading to the protected circuit. Ensure correct polarity and tight connections.
5. ბრუნვის მომენტი: Tighten all terminal screws to the manufacturer's specified torque to prevent loose connections and overheating.
6. გადამოწმება: Double-check all connections for correctness and security before restoring power.

5. ოპერაცია

The RCBO operates automatically to protect against electrical faults. Manual operation is also possible:

• ჩართვა: Push the toggle switch upwards to the 'ON' position.
• Გამორთვა: Push the toggle switch downwards to the 'OFF' position.
• ავტომატური გამორთვა: In the event of an overcurrent (overload or short-circuit) or an earth leakage current exceeding 30mA, the RCBO will automatically trip, moving the toggle switch to the 'OFF' or intermediate position.
• ტესტის ფუნქცია: Press the 'T' (Test) button periodically (e.g., monthly) to verify the residual current tripping mechanism. The RCBO should trip immediately. If it does not trip, the device may be faulty and requires replacement.

6. მოვლა

The Hager ADC810H RCBO requires minimal maintenance, but regular checks are essential for continued safety and performance:

• ვიზუალური შემოწმება: პერიოდულად შეამოწმეთ მოწყობილობა ფიზიკური დაზიანების, ფერის შეცვლის ან შესუსტებული შეერთებების ნიშნების არსებობაზე.
• სატესტო ღილაკის მუშაობა: Perform the test button operation monthly as described in the 'Operation' section.
• დასუფთავება: If necessary, clean the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• პროფესიონალური შემოწმება: It is recommended to have the entire electrical installation, including protective devices, inspected by a qualified electrician at regular intervals as per local regulations.

7. Დიაგნოსტიკა

If the RCBO trips unexpectedly or fails to operate correctly, consider the following:

• RCBO Trips Immediately After Reset:
  • შესაძლო მიზეზი: Persistent earth fault or short-circuit in the protected circuit.
  • გამოსავალი: Disconnect all loads from the circuit. If the RCBO still trips, there is a fault in the fixed wiring. If it holds, reconnect loads one by one to identify the faulty appliance. Consult a qualified electrician.
• RCBO Trips Intermittently:
  • შესაძლო მიზეზი: Intermittent earth fault, overloaded circuit, or faulty appliance.
  • გამოსავალი: Reduce the load on the circuit. Check appliances for intermittent faults.
• RCBO Does Not Trip When Test Button is Pressed:
  • შესაძლო მიზეზი: გაუმართავი RCBO.
  • გამოსავალი: The device is not providing residual current protection and must be replaced immediately by a qualified electrician.
• No Power to Circuit, RCBO is ON:
  • შესაძლო მიზეზი: Loose connection, fault upstream (e.g., main breaker tripped), or internal device failure.
  • გამოსავალი: Check all connections. Verify power supply to the RCBO. If issues persist, consult a qualified electrician.

8. ტექნიკური მახასიათებლები

9. ინფორმაცია გარანტიის შესახებ

Hager products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official Hager website or contact your local supplier for detailed warranty information applicable to your purchase. Keep your proof of purchase for warranty claims.

10. მხარდაჭერა და კონტაქტი

For technical assistance, product inquiries, or support, please contact Hager customer service or your authorized Hager distributor. You can typically find contact information on the official Hager website or on the product packaging. When contacting support, please have your product model number (ADC810H) and any relevant purchase details ready.

Hager-ის ოფიციალური პირი Webსაიტი: www.hager.com