Allanson Industrial Gas Ignitor

1. შესავალი

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Allanson Industrial Gas Ignitor, Model 2260-TP. This electronic ignition transformer is designed for industrial gas applications, providing reliable ignition for various heating systems.

სურათი 1: Allanson Industrial Gas Ignitor Model 2260-TP. This image displays the black rectangular electronic ignition transformer with a white label. The label clearly shows 'Allanson ELECTRONIC IGNITION TRANSFORMER CAT No. 2260-TP', along with primary and secondary voltage/current ratings. It also indicates 'MADE IN CANADA'. Electrical wires are visible, connected to one side of the unit.

2. უსაფრთხოების ინფორმაცია

გაფრთხილება: Installation and servicing of this ignitor must be performed by a qualified and licensed professional. Failure to follow these instructions could result in property damage, personal injury, or death.

• ანთების მოწყობილობის დამონტაჟებამდე ან მომსახურებამდე ყოველთვის გამორთეთ ელექტროენერგია მოწყობილობაზე.
• დარწმუნდით, რომ ყველა გაყვანილობა შეესაბამება ადგილობრივ და ეროვნულ ელექტრო კოდებს.
• Verify proper grounding to prevent electrical shock.
• Handle gas lines with extreme care. Check for gas leaks after installation.
• Do not operate the ignitor if any part is damaged or wet.

3. პროდუქტი დასრულდაview

The Allanson 2260-TP is an electronic ignition transformer designed to provide a high-voltage spark for igniting gas in industrial heating systems. It converts standard line voltage to a high-voltage output, ensuring reliable and efficient ignition.

ძირითადი მახასიათებლები:

• Electronic ignition for consistent performance.
• კომპაქტური და გამძლე დიზაინი.
• Designed for industrial applications.

4. დაყენება და ინსტალაცია

სანამ დაიწყებთ:

1. Ensure the power supply matches the ignitor's specifications (120V, 50/60Hz).
2. Confirm the ignitor is compatible with your specific heating system.
3. Gather necessary tools: screwdrivers, wire strippers, multimeter, mounting hardware.

ინსტალაციის ნაბიჯები:

1. დენის გათიშვა: Turn off all power to the heating system at the main circuit breaker. Verify power is off using a multimeter.
2. Remove Old Ignitor (if applicable): Carefully disconnect wiring and mounting hardware from the existing ignitor. Note wire connections for reference.
3. მონტაჟი: Securely mount the Allanson 2260-TP ignitor in the designated location using appropriate hardware. Ensure it is stable and free from vibration.
4. გაყვანილობა: Connect the primary (input) wires to the 120V AC power supply according to the wiring diagram of your appliance. Connect the secondary (output) wires to the spark electrode or ignition rod. Ensure all connections are tight and insulated. Refer to the label on the ignitor for specific primary and secondary connections.
5. დამიწება: Ensure the ignitor and the appliance are properly grounded.
6. საბოლოო შემოწმებები: Double-check all wiring connections. Ensure no loose wires or potential short circuits.

5. საოპერაციო ინსტრუქციები

The Allanson 2260-TP ignitor operates automatically as part of the heating system's control sequence. Once properly installed and wired, it will generate a high-voltage spark when called upon by the system's control board to ignite the gas burner.

Მუშაობა:

1. Ensure all installation steps are completed and verified.
2. გათბობის სისტემაში ელექტროენერგიის მიწოდება აღადგინეთ.
3. Initiate a call for heat from the thermostat or control system.
4. Observe the ignitor's operation. It should produce a visible spark at the electrode, leading to gas ignition.
5. If ignition does not occur, refer to the Troubleshooting section.

6. მოვლა

The Allanson 2260-TP ignitor is designed for long-term reliability with minimal maintenance. However, periodic inspection of the entire ignition system is recommended as part of routine appliance servicing.

• წლიური შემოწმება: During annual furnace or boiler maintenance, have a qualified technician inspect the ignitor and its wiring for any signs of wear, corrosion, or damage.
• დასუფთავება: Ensure the area around the ignitor and spark electrode is free from dust, debris, or carbon buildup, which can interfere with proper sparking.
• მავთულის მთლიანობა: Check that all electrical connections are secure and that insulation on wires is intact.

7. Დიაგნოსტიკა

If the ignitor is not functioning correctly, perform the following checks. Always disconnect power before inspecting components.

If problems persist after troubleshooting, contact a qualified HVAC technician or the manufacturer for assistance.

8. სპეციფიკაციები

9. გარანტია და მხარდაჭერა

Specific warranty information for the Allanson Industrial Gas Ignitor #2260-TP is not provided in this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact Allanson directly through their official webსაიტი ან მომხმარებელთა მომსახურების არხები.

For technical support or further assistance, please reach out to a qualified HVAC professional or the manufacturer's support team.