RYOBI P739 1 GAL. 120 PSI Portable 18V ONE+ Horizontal Air Compressor

შესავალი

Thank you for choosing the RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor. This versatile and compact air compressor is designed for a variety of inflation tasks, from vehicle tires to recreational inflatables, and can also power small pneumatic tools. Its cordless design, powered by the RYOBI ONE+ 18V battery system, offers exceptional portability and convenience for both indoor and outdoor projects.

სურათი 1: საერთო ჯამში view of the RYOBI P739 Air Compressor.

უსაფრთხოების ინფორმაცია

Always read and understand the entire instruction manual before operating the air compressor. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• თვალის დაცვა: Always wear ANSI Z87.1 compliant eye protection with side shields when operating or performing maintenance on the compressor.
• სმენის დაცვა: სმენის დაზიანების თავიდან ასაცილებლად, მუშაობის დროს გამოიყენეთ სმენის დამცავი.
• ვენტილაცია: Operate the compressor in a well-ventilated area. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• ელექტრო უსაფრთხოება: დარწმუნდით, რომ დენის წყარო ემთხვევა მოცtage requirements of the compressor. Avoid using extension cords if possible; if necessary, use only appropriate gauge and length.
• წნევის შემსუბუქება: Never exceed the maximum pressure rating of any tool or accessory. Always relieve air pressure from the tank before servicing or storing the compressor.
• ტანკის გადინება: Regularly drain moisture from the air tank to prevent corrosion and ensure safe operation.
• ბავშვები და გამვლელები: მოარიდეთ ბავშვები და მნახველები საოპერაციო ზონას.

პაკეტის შიგთავსი

The RYOBI P739 Air Compressor package includes:

• RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor
• მფლობელის სახელმძღვანელო
• Inflation Accessories (various nozzles and needles)

შენიშვნა: ბატარეა და დამტენი ცალკე იყიდება.

სპეციფიკაციები

Figure 2: Product dimensions of the RYOBI P739 Air Compressor.

დაყენება

1. დააინსტალირეთ ბატარეა: Ensure your RYOBI ONE+ 18V battery is fully charged. Slide the battery into the battery port on the compressor until it clicks securely into place.


Figure 3: Inserting the 18V ONE+ battery into the compressor.

2. ჰაერის შლანგის შეერთება: The compressor features both high-pressure and low-pressure inflation/deflation ports. For high-pressure tasks like tires, connect the appropriate chuck to the high-pressure outlet. For low-pressure tasks like inflatables, attach the large diameter hose to the low-pressure port.


Figure 4: Labeled components including high-pressure and low-pressure ports.

3. ჩართვა: Press the power button on the control panel to turn on the compressor. The digital display will illuminate.

ოპერაციული ინსტრუქციები

ზოგადი ოპერაცია

The control panel features a digital display, mode selection, and +/- buttons for adjusting pressure settings. The compressor has an automatic shut-off feature once the set pressure is reached.

High-Pressure Inflation (Tires)

1. დააყენეთ სასურველი წნევა: Use the +/- buttons on the control panel to set the target PSI (Pounds per Square Inch) for your tire. Refer to your vehicle's owner's manual or tire sidewall for recommended pressure.
2. Connect Chuck: Securely attach the high-pressure chuck to the tire valve stem. Ensure a tight seal to prevent air leakage.
3. ინფლაციის დაწყება: Press the START/STOP button to begin inflation. The compressor will automatically stop once the preset PSI is reached.
4. გათიშვა: Once inflation is complete, disconnect the chuck from the valve stem.

Figure 5: Inflating a car tire using the high-pressure hose.

Low-Pressure Inflation/Deflation (Inflatables)

1. Attach Large Hose: Connect the large diameter hose to the low-pressure inflation/deflation port. Select the appropriate nozzle for your inflatable item.
2. გაბერვა/გაფუჭება: For inflation, connect the hose to the item and press the START/STOP button. For deflation, connect the hose to the item and select the deflation mode (if available, or reverse the hose connection if applicable to the specific model).
3. მონიტორი: Monitor the inflation/deflation process visually. This mode does not have an automatic shut-off based on pressure.

მოვლა

• ჰაერის გადინების ავზი: Regularly drain moisture from the air tank using the 1/4 turn tank drain valve located at the bottom of the tank. This prevents rust and extends the life of the compressor.
• სუფთა ჰაერის ფილტრი: Periodically inspect and clean the air filter to ensure optimal performance. Refer to the manual for specific cleaning instructions.
• სათანადოდ შენახვა: Store the compressor in a clean, dry area away from extreme temperatures. Disconnect the battery when not in use for extended periods.

პრობლემების მოგვარება

გარანტია და მხარდაჭერა

For warranty information, technical support, or to order replacement parts, please refer to the warranty card included with your product or visit the official RYOBI webსაიტი. შეინახეთ თქვენი შესყიდვის ქვითარი, როგორც შეძენის დამადასტურებელი საბუთი ნებისმიერი გარანტიის მოთხოვნის შემთხვევაში.