Moukey MCM-1 კამერის მიკროფონის მომხმარებლის სახელმძღვანელო

შესავალი

The Moukey MCM-1 is a compact, battery-free shotgun microphone designed to enhance audio recording quality for a wide range of devices, including DSLR cameras, camcorders, smartphones, and tablets. Its cardioid polar pattern focuses on sounds directly in front of the microphone, effectively reducing background noise for clear and crisp audio capture. This manual provides essential information for setup, operation, and maintenance of your MCM-1 microphone.

რა არის ყუთში

Image: All components included with the Moukey MCM-1 microphone, laid out for clear viewინგ.

Upon unboxing your Moukey MCM-1, please verify that all the following items are present:

• 1 x Moukey MCM-1 Microphone
• 1 x 3.5mm TRS Output Cable (for DSLR Cameras, Camcorders, Recorders)
• 1 x 3.5mm TRRS Output Cable (for Smartphones, Tablets, Mac)
• 1 x OMTP Adapter
• 1 x რბილი სატარებელი ჩანთა
• 1 x Furry Windscreen (Dead Cat)
• 1 x შოკის სამაგრი
• 1 x Foam Cover (Pop Filter)

დაყენება და ინსტალაცია

Follow these steps to properly set up your Moukey MCM-1 microphone with your recording device.

1. Attaching the Shock Mount

სურათი: დეტალური view of the microphone's shock mount, cold shoe mount, and 1/4" thread bottom.

1. Gently insert the microphone into the red shock mount. Ensure it is securely seated.
2. The shock mount features a cold shoe adapter at its base. Slide this adapter into the cold shoe mount on your DSLR camera or camcorder. Tighten the locking wheel if available.
3. For smartphone rigs or tripods, the shock mount also has a 1/4" thread bottom. Attach it to any standard tripod or rig with a compatible screw.

2. თქვენს მოწყობილობასთან დაკავშირება

Image: The Moukey MCM-1 microphone shown connected to both a DSLR camera and a smartphone, illustrating cable usage.

• For DSLR Cameras, Camcorders, and Audio Recorders: გამოიყენეთ 3.5mm TRS Output Cable. Connect one end to the microphone and the other end to the 3.5mm microphone input jack on your device.
• For Smartphones, Tablets, and Mac: გამოიყენეთ 3.5mm TRRS Output Cable. Connect one end to the microphone and the other end to the 3.5mm headphone/microphone jack on your device.
• For iPhone 7 and above: An original 3.5mm-to-Lightning adapter (not included) is required. Connect the TRRS cable to the adapter, then the adapter to your iPhone.
• მნიშვნელოვანი შენიშვნა: Ensure you use the correct cable (TRS or TRRS) for your device. Refer to the cable's labeling instructions. Incorrect cable usage will prevent the microphone from functioning properly.
• Compatibility Restrictions: This microphone is not suitable for Canon EOS series, T5i, T6, T7, or any camera lacking a 3.5mm microphone input jack.

3. Attaching Wind Protection

• ქაფის საფარი: For indoor use or light wind conditions, slide the foam cover over the microphone head.
• Furry Windscreen (Dead Cat): For outdoor use or windy environments, place the furry windscreen over the foam cover or directly over the microphone head for maximum wind noise reduction.

ოპერაციული ინსტრუქციები

The Moukey MCM-1 is a battery-free microphone, meaning it draws power directly from your connected device. No external power source or batteries are required for operation.

Image: A person using the Moukey MCM-1 microphone with a camera for recording audio.

1. Ensure the microphone is securely attached and correctly connected to your recording device using the appropriate cable.
2. Position the microphone to face the sound source directly. The MCM-1 features a unidirectional (cardioid) polar pattern, which means it is most sensitive to sounds coming from the front and less sensitive to sounds from the sides and rear. This helps in isolating the desired audio and reducing ambient noise.
3. On your recording device (camera, smartphone, etc.), select the external microphone as the audio input source in the settings, if applicable.
4. Perform a test recording to check audio levels and quality before your main recording session. Adjust your device's audio input gain as needed.
5. For optimal sound, maintain an appropriate distance from the sound source. Avoid touching the microphone or cables during recording to prevent handling noise, which the shock mount helps to minimize.

სურათი: მაგamples of the Moukey MCM-1 microphone in use for different applications like vlogging, live events, and travel recording.

მოვლა

• დასუფთავება: მიკროფონის კორპუსის გასაწმენდად გამოიყენეთ რბილი, მშრალი ქსოვილი. არ გამოიყენოთ თხევადი საწმენდი საშუალებები ან გამხსნელები.
• შენახვა: When not in use, store the microphone and its accessories in the provided soft carrying pouch to protect them from dust and physical damage.
• დამუშავება: Avoid dropping the microphone or subjecting it to strong impacts, as this can damage the internal components.
• გარემო პირობები: მიკროფონი მოარიდეთ ექსტრემალურ ტემპერატურას, მაღალ ტენიანობას და მზის პირდაპირ სხივებს.

პრობლემების მოგვარება

სპეციფიკაციები

გარანტია და მხარდაჭერა

For warranty information or technical support regarding your Moukey MCM-1 microphone, please refer to the official Moukey webსაიტზე ან პირდაპირ დაუკავშირდით მათ მომხმარებელთა მომსახურების სამსახურს. შეინახეთ თქვენი შესყიდვის ქვითარი, როგორც შეძენის დამადასტურებელი საბუთი გარანტიის ნებისმიერი მოთხოვნის შემთხვევაში.

Official Moukey Store: Moukey Store on Amazon