1. პროდუქტი დასრულდაview
The WAGO 284-681 is a 3-conductor through terminal block designed for reliable electrical connections. This terminal block facilitates secure wiring within control cabinets and industrial applications, offering a compact and efficient solution for distributing electrical potential.
Key features include its DIN rail mount compatibility and screw-type connection, ensuring robust and stable installations.
სურათი 1: განივი კვეთა view of the WAGO 284-681 3-Conductor Through Terminal Block, showing the internal spring clamp mechanism and conductor pathways. The grey housing encases the metallic current bar and the spring-loaded clamping units for secure wire termination.
2. უსაფრთხოების ინფორმაცია
ინსტალაციამდე და გამოყენებამდე ყურადღებით გაეცანით ყველა ინსტრუქციას. ამ ინსტრუქციების შეუსრულებლობამ შეიძლება გამოიწვიოს ელექტროშოკი, ხანძარი ან სერიოზული დაზიანება.
- ინსტალაცია უნდა შესრულდეს მხოლოდ კვალიფიციური პერსონალის მიერ.
- Ensure power is disconnected before working on electrical circuits.
- გამოიყენეთ შესაბამისი პერსონალური დამცავი აღჭურვილობა (PPE).
- Verify correct wire gauge and insulation for the application.
- არ გადააჭარბოთ მითითებულ მოცულობასtage and current ratings of the terminal block.
- Inspect terminal blocks for damage before installation. Do not use damaged products.
3. დაყენება და ინსტალაცია
The WAGO 284-681 terminal block is designed for DIN rail mounting. Follow these steps for proper installation:
- მონტაჟი DIN Rail-ზე:
Align the terminal block with the DIN rail. Press the block firmly onto the rail until it clicks into place. Ensure it is securely seated and does not wobble.
- მავთულის მომზადება:
Strip approximately 9-10 mm (0.35-0.39 inches) of insulation from the conductor ends. Ensure the conductor strands are not damaged during stripping.
- Conductor Connection (Screw Type):
Insert the prepared conductor into the designated clamping unit. Use an appropriate screwdriver to tighten the screw firmly. Ensure the conductor is fully seated and the screw is tightened to the recommended torque (refer to technical specifications for exact values, typically found on product packaging or WAGO's official documentation). Gently pull on the wire to confirm a secure connection.
- ტესტირება:
After all connections are made, perform continuity and insulation resistance tests to verify proper wiring and prevent short circuits.
4. საოპერაციო ინსტრუქციები
Once installed and wired, the WAGO 284-681 terminal block functions as a passive component for electrical distribution. No active operation is required beyond ensuring proper connections and adherence to electrical safety standards.
- ტtage და მიმდინარე: დარწმუნდით, რომ გამოყენებული ტtage and current do not exceed the maximum ratings specified for the terminal block.
- გარემო პირობები: Operate the terminal block within its specified environmental conditions (temperature, humidity) to ensure optimal performance and longevity.
5. მოვლა
The WAGO 284-681 terminal block is designed for maintenance-free operation under normal conditions. However, periodic inspection is recommended to ensure continued reliability.
- ვიზუალური შემოწმება: Periodically inspect the terminal blocks for any signs of physical damage, discoloration, or loose connections.
- კავშირის მთლიანობა: If accessible and safe to do so (with power disconnected), gently check the tightness of screw connections, especially in environments subject to vibration or significant temperature fluctuations.
- დასუფთავება: If necessary, clean the exterior of the terminal block with a dry, lint-free cloth. Do not use solvents or abrasive cleaners.
6. Დიაგნოსტიკა
Most issues related to terminal blocks stem from improper installation or exceeding operational limits. Refer to the following common issues and solutions:
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| Loose connection / Intermittent contact | Insufficient tightening of screw; improper wire stripping; wire pull-out. | Disconnect power. Re-strip wire if necessary. Re-insert and tighten screw to recommended torque. Verify connection by gently pulling the wire. |
| Overheating / Discoloration | Overcurrent; loose connection; environmental factors. | Disconnect power immediately. Check circuit for overcurrent conditions. Inspect connections for looseness. Ensure ambient temperature is within specified limits. Replace damaged terminal block. |
| Difficulty inserting wire | Wire gauge too large; screw not sufficiently loosened. | Ensure wire gauge matches terminal block specifications. Loosen the screw completely before attempting to insert the wire. |
If problems persist, consult a qualified electrician or contact WAGO technical support.
7. ტექნიკური მახასიათებლები
The following specifications apply to the WAGO 284-681 3-Conductor Through Terminal Block:
- მოდელი: 284-681 წწ
- ბრენდი: WAGO
- პოლონელების რაოდენობა: 3
- კონექტორის ტიპი: ხრახნი
- სამონტაჟო ტიპი: DIN სარკინიგზო მთა
- დაკმაყოფილებულია სპეციფიკაცია: DIN
- ASIN: B07QJB7CTQ
- მწარმოებელი: ვაგო
- პირველი ხელმისაწვდომი: 9 წლის 2020 თებერვალი
- Note: For detailed electrical ratings (voltage, current, wire size range), please refer to the product packaging or official WAGO datasheets.
