KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

შესავალი

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

წინა view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

სურათი: წინა მხარე view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

დაყენება და პროგრამირება

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

პროგრამირების ნაბიჯები:

  1. Open the driver's side door of your vehicle.
  2. ჩადეთ გასაღები ანთების მექანიზმში და მოატრიალეთ ის ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. დააჭირეთ საკონტროლო ღილაკს შვიდჯერ. შესახებ eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the ჩაკეტვა button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. გაათავისუფლეთ საკონტროლო ღილაკი.
  7. ჩართეთ ანთების გასაღები გამორთულია პოზიცია და ამოიღეთ იგი.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

ვიდეო: მოკლე მიმოხილვაview of KeylessOption Key Fob Remotes for Viper systems.

ოპერაციული ინსტრუქციები

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

დახრილი view of the KeylessOption Key Fob, showing the side profile და ღილაკების განლაგება.

სურათი: დახრილი view of the KeylessOption Key Fob, highlighting its ergonomic design.

მოვლა

ბატარეის გამოცვლა:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Snap the remote casinუსაფრთხოდ დააკავშირეთ ისევ ერთად.
უკან view of the KeylessOption Key Fob, showing the smooth casing.

სურათი: უკანა მხარე view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

პრობლემების მოგვარება

სპეციფიკაციები

ბრენდიKeylessOption
მოდელის ნომერიEZSDEI7141 474V
თავსებადი მოწყობილობებიViper Aftermarket Alarm System
FCC IDEZSDEI7141
ღილაკების რაოდენობა4 (Lock, Unlock, Aux, Panic)
ნივთის წონა0.634 უნცია
პაკეტის ზომები6.77 x 4.65 x 0.47 ინჩი

გარანტია და მხარდაჭერა

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webსაიტი.

KeylessOption Warranty Card

Image: KeylessOption Warranty Card, included with each purchase.

დაკავშირებული დოკუმენტები - EZSDEI7141 474V

წინასწარიview Directed 474T 1-Way 4-Button Remote Control
Replacement 1-Way 4-Button Remote Control for Directed systems and compatible Avital, Clifford, and other brands. Features include CR2032 battery, 434Mhz frequency, and 1/4-mile range.
წინასწარიview Remote Control Compatibility and Replacement Guide
A comprehensive reference guide detailing remote control models, part numbers, date codes, and compatible replacement remotes across various brands including Automate, Clifford, Viper, and many others. Includes a section for FCC ID cross-referencing.