Turck NI3-EG08K-AP6X-V1131

TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor User Manual

Model: NI3-EG08K-AP6X-V1131

1. შესავალი

This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.

პროდუქტის უსაფრთხო და ეფექტური მუშაობის უზრუნველსაყოფად, გთხოვთ, გამოყენებამდე ყურადღებით წაიკითხოთ ეს ინსტრუქცია.

2. უსაფრთხოების ინფორმაცია

WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.

3. პროდუქტი დასრულდაview

The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:

This sensor is designed for reliable detection of metallic targets in industrial environments.

4. დაყენება და ინსტალაცია

4.1 მონტაჟი

  1. Select a mounting location where the sensor is protected from physical damage and excessive heat.
  2. Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
  3. Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.

4.2 გაყვანილობა

The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:

Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.

5. ოპერაცია

Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:

The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.

6. მოვლა

The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.

7. Დიაგნოსტიკა

პრობლემაშესაძლო მიზეზიგამოსავალი
Sensor not detecting objects / LED always OFF
  • არ არის კვების წყარო
  • არასწორი გაყვანილობა
  • Object out of sensing range
  • დაზიანებულია სენსორი
  • Check power supply (10-30VDC).
  • შეამოწმეთ გაყვანილობა 4.2 პუნქტის შესაბამისად.
  • Adjust target position within 3mm range.
  • Replace sensor if damaged.
Sensor always ON / LED always ON
  • Metallic object permanently in sensing range
  • Interference from surrounding metal
  • სენსორი გაუმართავია
  • Remove any metallic objects from the sensing area.
  • Check mounting clearances.
  • Replace sensor if faulty.
პერიოდული აღმოჩენა
  • ფხვიერი კავშირები
  • ვიბრაცია
  • Target speed too high
  • დაამაგრეთ ყველა სადენიანი კავშირი.
  • უზრუნველყავით სტაბილური მონტაჟი.
  • Verify target speed is within sensor capabilities (refer to datasheet).

8. სპეციფიკაციები

პარამეტრიღირებულება
მოდელის ნომერიNI3-EG08K-AP6X-V1131
მწარმოებელიTurck
სენსორული დიაპაზონი3 მმ
საბინაო ტიპიM8x1 Barrel, 8mm stainless steel full threading short barrel
გამომავალი ტიპიPNP, ჩვეულებრივ ღია (არა)
საოპერაციო ტომიtage10-30 VDC
კავშირიM8 Male Connector (Picofast 3-Pin QD)
ინდიკატორი1 LED
ASINB0898TS8W2
პირველი ხელმისაწვდომი თარიღი27 წლის 2020 მაისი

9. გარანტია და მხარდაჭერა

For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.

For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.

Turck Official Webსაიტი: www.turck.com

დაკავშირებული დოკუმენტები - NI3-EG08K-AP6X-V1131

წინასწარიview TURCK TBEC-LL-4RFID-8DXP RFID Interface: Instructions for Use
This document provides comprehensive instructions for the TURCK TBEC-LL-4RFID-8DXP RFID Interface, detailing its installation, connection, operation, and safety guidelines for industrial automation applications.
წინასწარიview TURCK NIMFE-EM12/4.6L88-UP6X-H1141/S1182 მაგნიტური ველის სენსორი - ტექნიკური მონაცემები და მონტაჟი
ფერომაგნიტური ნაწილების აღმოსაჩენად განკუთვნილი TURCK NIMFE-EM12/4.6L88-UP6X-H1141/S1182 მაგნიტური ველის სენსორის დეტალური ტექნიკური მახასიათებლები, მახასიათებლები, გაყვანილობის დიაგრამა, ფუნქციონირების პრინციპი და მონტაჟის ინსტრუქციები TIN საფარით.
წინასწარიview TURCK FEN20-4IOL IO-Link მთავარი მოდული: გამოყენების ინსტრუქცია
TURCK FEN20-4IOL IO-Link მთავარი მოდულის ყოვლისმომცველი ინსტრუქციები, რომლებიც მოიცავს მის მახასიათებლებს, სისტემის არქიტექტურას, ინსტალაციას, ექსპლუატაციაში გაშვებას და სამრეწველო ავტომატიზაციის აპლიკაციების მუშაობას.
წინასწარიview Turck MR... Radar Scanner Quick Start Guide
Quick start guide for the Turck MR... Radar Scanner, detailing its features for non-contact object detection, distance, angle, and velocity measurement. Includes installation, operation, technical specifications, safety guidelines, and compliance information for industrial automation applications. Supports IO-Link and SAE J1939 protocols.
წინასწარიview TURCK NIC...-EM30-IOL-... Inductive Couplers Quick Start Guide
Quick start guide for TURCK NIC...-EM30-IOL-... inductive couplers, detailing intended use, safety precautions, product features, installation, connection, operation, LED indicators, troubleshooting, and technical specifications. Includes information on IO-Link and SIO modes.
წინასწარიview TBPN-L5-4FDI-4FDX უსაფრთხოების ბლოკის შემავალი/გამომავალი მოდული: გამოყენების ინსტრუქცია
ეს დოკუმენტი იძლევა TURCK TBPN-L5-4FDI-4FDX უსაფრთხოების ბლოკის შემავალი/გამომავალი მოდულის გამოყენების ინსტრუქციას. იგი მოიცავს პროდუქტის აღწერას, უსაფრთხოების ინფორმაციას, ინსტალაციას, კონფიგურაციას, ექსპლუატაციას და ტექნიკურ მონაცემებს სამრეწველო ავტომატიზაციის აპლიკაციებისთვის.