1. პროდუქტი დასრულდაview
The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.
2. დაყენება
2.1 გახსნა და კომპონენტების შემოწმება
ფრთხილად გახსენით ყველა კომპონენტი და დარწმუნდით, რომ შემდეგი ნივთები ხელთ არის:
- მთავარი ჩვენების განყოფილება
- 5-in-1 Outdoor Multi-Sensor Unit
- Mounting accessories (pole, base, screws)
- Power adapter for main unit
- ინსტრუქციის სახელმძღვანელო
2.2 ბატარეის დაყენება
მთავარი ეკრანის ბლოკი: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.
Outdoor Multi-Sensor Unit: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.
2.3 Outdoor Sensor Placement and Mounting
გარე სენსორის სწორად განთავსება გადამწყვეტი მნიშვნელობისაა ზუსტი მაჩვენებლებისთვის.
- Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
- Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
- Orient the wind vane (the arrow) to point North during installation.
- Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

სურათი: გვერდი view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.
2.4 საწყისი სინქრონიზაცია
After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.
2.5 დროისა და თარიღის დაყენება
The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.
3. Operating the Weather Station
3.1 ჩვენება დასრულდაview
The main display unit presents various weather parameters:
- OUT: გარე ტემპერატურა და ტენიანობა.
- IN: Indoor temperature and humidity.
- WIND: Current wind speed and direction, including gust speed.
- პროგნოზი: Weather forecast icons (sunny, cloudy, rainy, etc.).
- ბარო: ბარომეტრიული წნევის მაჩვენებლები.
- ნალექი: Daily, weekly, or monthly rainfall accumulation.
- დრო/თარიღი: მიმდინარე დრო, თარიღი და კვირის დღე.
- BEAUFORT: Beaufort scale indicator for wind force.
- ქარიშხალი: Calculated wind chill temperature.

სურათი: წინა მხარე view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.
3.2 ღილაკის ფუნქციები
The display unit features several buttons for navigation and settings:
- ისტორია: View historical data for various parameters.
- მაქსიმალური / წთ: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
- სინათლე: Adjust backlight brightness or activate temporary backlight.
- MODE/SET: Enter settings mode or confirm selections.
- ზემოთ/ქვემოთ მიმართული ისრები: Navigate through menus or adjust values.
3.3 სიგნალიზაციის დაყენება
You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.
3.4 ერთეულის შერჩევა
To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.
4. მოვლა
4.1 ბატარეის გამოცვლა
Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.
4.2 დასუფთავება
Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.
4.3 ზოგადი მოვლა
Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.
5. Დიაგნოსტიკა
- მთავარ ბლოკზე ეკრანი არ არის: Check power adapter connection and backup battery.
- გარე მონაცემები არ არის: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
- არაზუსტი წაკითხვები: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
- დრო/თარიღი არასწორია: If RCC synchronization fails, manually set the time and date.
6. სპეციფიკაციები
| ფუნქცია | დეტალი |
|---|---|
| ბრენდი | BRESSER |
| მოდელის ნომერი | 7002525 |
| ASIN | B08VDM1VB7 |
| რეკომენდებული გამოყენება | მთავარი |
| სპეციფიკური გამოყენება | Air humidity measurement, air pressure measurement, temperature alarm, temperature measurement, wind measurement, alarm clock |
| დენის წყარო | Battery Powered (3 AA batteries required for outdoor sensor, 1 CR2032 for main unit backup) |
| სპეციალური ფუნქცია | Lightweight, Transparent |
| მასალა | მეტალი |
| დაკავშირების ტექნოლოგია | 433 MHz ან 868 MHz |
| პროდუქტის ზომები | 4.65"D x 7.17"W x 0.79"H (Main Unit) |
| მოყვება კომპონენტები | 1 product (Main Display Unit, 5-in-1 Outdoor Multi-Sensor Unit, mounting accessories, power adapter) |
| ტემპერატურის სიზუსტე | 1 or 2 Degrees Celsius |
| სენსორის ტექნოლოგია | Ultrasonic or other compatible |
| ზედა ტემპერატურის რეიტინგი | 50 გრადუსი ცელსიუსით |
| ნივთის წონა | 0.71 კილოგრამი (1.56 ფუნტი) |
| ჩვენების ტიპი | LCD, LED or VFD |
| დასრულების ტიპი | მბზინავი |
| ფორმა | მართკუთხა |
| პირველი ხელმისაწვდომი თარიღი | 16 წლის 2023 მარტი |
7. გარანტია და მხარდაჭერა
For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.





