CallToU CDVP 2-2 U Wireless Caregiver Pager System Instruction Manual

1. შესავალი

The CallToU Wireless Caregiver Pager System is designed to provide reliable communication between caregivers and individuals requiring assistance, such as the elderly, patients, or those with hearing impairments. This system offers peace of mind through its extended range, multiple alert options, and user-friendly design.

2. ძირითადი მახასიათებლები

• გაფართოებული უკაბელო დიაპაზონი: Up to 1000 feet (300 meters) in open areas, ensuring reliable signal transmission throughout homes and yards.
• გაფრთხილების მრავალი რეჟიმი: Receivers feature adjustable volume (0-110dB), LED light, and vibration functions, suitable for various needs, including hard-of-hearing caregivers.
• User-Friendly Call Buttons: Simple one-touch SOS call buttons are waterproof (IP55 rated) and can be worn with a lanyard or mounted.
• Flexible Receiver Options: Includes both a portable battery-powered receiver with a belt clip and a plug-in receiver.
• გაფართოებადი სისტემა: Supports pairing with up to 20 additional receivers or call buttons.

3. რა არის ყუთში

• 1 x მიმღები
• 1 x Portable Battery-Powered Receiver
• 2 x Call Buttons (Waterproof)
• 2 x ლანიარდი
• 2 x Double-sided Adhesive Pads
• 1 x Small Screwdriver (for battery replacement)
• Batteries (included for both receivers and call buttons)
• მომხმარებლის სახელმძღვანელო

4. დაყენების გზამკვლევი

4.1. Call Button Battery Installation and Lanyard Attachment

The call buttons come with a pre-installed 23A 12V battery. To replace the battery or attach the lanyard:

1. Use the provided small screwdriver to open the back cover of the call button.
2. If replacing, carefully remove the old battery and insert a new 23A 12V battery, ensuring correct polarity.
3. To attach the lanyard, thread the small loop of the lanyard through the designated hole on the back cover. Pass the larger part of the lanyard through the small loop to secure it.
4. Close the back cover and re-tighten the screws.

4.2. Portable Receiver Battery Installation and Clip Attachment

The portable receiver requires 2 AAA batteries (included). To install batteries and attach the belt clip:

1. Slide off the battery cover on the back of the portable receiver.
2. ჩადეთ 2 AAA ელემენტი, დაიცვათ სწორი პოლარობა (+/-).
3. Reattach the battery cover. The belt clip can be slid into the designated slots on the back of the receiver.

4.3. Pairing Call Buttons with Receivers

The system is typically pre-paired. If re-pairing is needed or for additional buttons:

1. Plug in the plug-in receiver or ensure the portable receiver has batteries.
2. On the receiver, press and hold the "Set" button (often indicated by a gear icon or "SET" text) for approximately 5 seconds until the receiver emits a "ding-dong" sound or flashes an LED.
3. While the receiver is in pairing mode, press the call button you wish to pair. The receiver should confirm successful pairing with another sound or flash.
4. Repeat for all call buttons.

5. საოპერაციო ინსტრუქციები

5.1. ზარის ღილაკის გამოყენება

To request assistance, simply press the large red "CALL" button on the transmitter. The button will illuminate briefly, and a signal will be sent to the paired receivers.

Image: The CallToU call button, featuring a prominent red 'CALL' button for easy activation.

5.2. Receiver Functions

Both receivers provide audible alerts, and the portable receiver also offers a vibration mode.

• ხმის რეგულირება: Use the volume buttons on the side of the plug-in receiver or the internal buttons on the portable receiver to adjust the alert volume (5 levels, 0-110dB).
• ზარის მელოდიის შერჩევა: Cycle through the available ringtones using the music selection buttons on the receivers. The plug-in receiver has 55 ringtones, and the portable receiver has 15.
• Vibration Mode (Portable Receiver): The portable receiver can be set to vibrate silently, ideal for hard-of-hearing users or quiet environments.
• LED ინდიკატორი: Both receivers feature an LED light that flashes when a call signal is received.
• Stop Button (Portable Receiver): A dedicated "STOP" switch on the side of the portable receiver allows you to quickly silence an ongoing alert.

Image: The portable receiver highlighting its LED indicator, vibration function, and speaker for audible alerts.

6. მოვლა

• ბატარეის გამოცვლა: Replace batteries in the call buttons (23A 12V) and portable receiver (AAA 1.5V) as needed. Battery life depends on usage frequency.
• დასუფთავება: Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• წყლის წინააღმდეგობა: Call buttons are IP55 waterproof, meaning they are splash-proof but should not be immersed in water.

7. Დიაგნოსტიკა

• No Signal/Receiver Not Alerting:
  • Check if receiver batteries are dead or if the plug-in receiver is properly connected to power.
  • Ensure call button battery is not depleted.
  • Re-pair the call button with the receiver following the setup instructions.
  • Verify that the receiver is not in silent mode (check volume level and vibration setting).
  • Reduce distance between call button and receiver, or remove obstacles that may interfere with the signal.
• Მოკლე დიაპაზონი:
  • Thick walls, metal structures, or other electronic devices can reduce range. Try repositioning receivers.
  • Ensure batteries are fresh in both the call button and portable receiver.

8. სპეციფიკაციები

9. გარანტია და მხარდაჭერა

For warranty information, technical support, or further inquiries, please refer to the contact information provided in your product packaging or visit the official CallToU webსაიტი.

The product includes a 30-day return/replacement policy through Amazon. Extended protection plans may be available for purchase.

Official CallToU Store: CallToU Store on Amazon