1. შესავალი
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lock'er Down LD2012EX EXxtreme Console Safe. This product is designed to provide secure storage within the center console of 2005-2015 Toyota Tacoma vehicles. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. პროდუქტი დასრულდაview
The Lock'er Down LD2012EX EXxtreme Console Safe is a heavy-duty security vault constructed from domestic 12-gauge cold-rolled steel, featuring an additional 10-gauge steel plate on the door for enhanced pry resistance. It integrates seamlessly into your vehicle's center console, utilizing factory bolt holes for a secure, immovable installation. The safe is equipped with a 4-digit combination lock for convenient access and security.
სურათი 2.1: ზემოდან ქვემოთ view of the Lock'er Down LD2012EX EXxtreme Console Safe, showing the combination lock and robust construction.
სურათი 2.2: ახლო ხედი view of the 4-digit combination lock mechanism on the console safe.
ძირითადი მახასიათებლები:
- მასალა: Domestic 12-gauge cold-rolled steel with 10-gauge steel door plate.
- საკეტის ტიპი: 4-digit combination lock.
- თავსებადობა: Specifically designed for 2005-2015 Toyota Tacoma models.
- უსაფრთხოება: Pry-resistant design, secured to vehicle's factory console bolt holes.
- დასრულება: Durable black powder coat.
- საკიდი: Spring-assisted door hinge for smooth operation.
3. უსაფრთხოების ინფორმაცია
- Always ensure the safe is properly installed and secured before driving.
- Do not store hazardous materials or illegal items in the safe.
- Keep the combination code confidential and in a secure location, separate from the vehicle.
- Exercise caution when opening and closing the safe door to avoid pinching fingers.
4. პაკეტის შიგთავსი
ინსტალაციის დაწყებამდე დარწმუნდით, რომ ყველა კომპონენტი ხელმისაწვლელია:
- Lock'er Down LD2012EX EXxtreme Console Safe
- Mounting Hardware (bolts, washers, nuts as required)
- ინსტალაციის ინსტრუქციები (ეს სახელმძღვანელო)
5. დაყენება და ინსტალაცია
Installation of the Lock'er Down console safe is designed to be straightforward, utilizing existing factory console bolt holes. No drilling is typically required.
საჭირო ინსტრუმენტები:
- სოკეტის ქანჩის ნაკრები
- Screwdriver (Phillips or flathead, depending on console fasteners)
ინსტალაციის ნაბიჯები:
- მოამზადეთ მანქანა: Open your vehicle's center console lid. Remove any existing console liner or tray to expose the console's interior base.
- წვდომის სამონტაჟო წერტილები: Locate the factory bolt holes at the bottom of the console. You may need to remove existing bolts or fasteners that secure the console to the vehicle's floor.
- სეიფის განთავსება: Carefully place the Lock'er Down console safe into the center console opening. Ensure it sits flush and aligns with the factory mounting holes.
- სეიფის დაცვა: Using the provided mounting hardware (bolts, washers, nuts), secure the safe to the vehicle's console. Tighten all fasteners firmly, but do not overtighten, to prevent damage.
- ტესტის შესაბამისობა: Close the console lid to ensure proper clearance and operation. The safe should be securely mounted and not shift.
სურათი 5.1: ყოფილიample of the console safe securely installed within a vehicle's center console, demonstrating its integrated fit.
6. საოპერაციო ინსტრუქციები
Your Lock'er Down console safe is equipped with a 4-digit combination lock. The factory default combination is typically 0-0-0-0. It is highly recommended to change this combination immediately after installation.
6.1 Opening the Safe:
- Rotate the dials to align your current 4-digit combination with the indicator line.
- Press the release button or turn the knob (depending on lock model) to open the safe door. The spring-assisted hinge will aid in opening.
6.2 Changing the Combination:
Follow these steps carefully to set a new personal combination:
- გახსენით სეიფი: Ensure the safe is open using the current combination.
- Locate Reset Lever/Button: Inside the safe door, locate the small reset lever or button. This is usually on the edge or underside of the lock mechanism.
- Engage Reset Mode: While the safe is open, push the reset lever to the "SET" position or press and hold the reset button. (Refer to specific lock instructions if provided with the safe for exact mechanism).
- ახალი კომბინაციის დაყენება: While the reset lever is engaged, rotate the dials to your desired new 4-digit combination. Choose a memorable but secure combination.
- Disengage Reset Mode: Return the reset lever to the "OFF" or original position, or release the reset button.
- ახალი კომბინაციის ტესტირება: With the safe door still open, scramble the dials. Then, enter your new combination and attempt to open the safe. If it opens, the new combination is set.
- დახურვა და ჩაკეტვა: Close the safe door and scramble the dials to lock it.
Important: Do not close the safe before testing the new combination. If you forget your combination, Lock'er Down may be able to assist, but it could involve a service fee or replacement of the lock mechanism.
7. მოვლა
- დასუფთავება: სეიფის გარე ზედაპირი რბილი ქსოვილით გაწმინდეთamp cloth. Avoid abrasive cleaners or solvents that could damage the powder coat finish.
- საკეტის მექანიზმი: The combination lock is designed for durability and typically requires no lubrication. If the dials become stiff, a small amount of graphite powder (not oil) can be applied sparingly.
- საკინძები: The spring-assisted hinge is maintenance-free. Ensure no debris obstructs its movement.
- უსაფრთხოების შემოწმება: Periodically check the mounting bolts to ensure they remain tight and the safe is securely fastened to the console.
8. Დიაგნოსტიკა
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| Safe door will not open with combination. | Incorrect combination entered; dials not perfectly aligned; lock mechanism jammed. | Double-check the combination and ensure dials are precisely aligned. Gently jiggle the door while entering the combination. If problem persists, contact customer support. |
| Safe feels loose after installation. | სამონტაჟო ჭანჭიკები საკმარისად არ არის გამკაცრებული. | Re-tighten all mounting bolts. Ensure the safe is properly seated in the console. |
| ციფერბლატები ხისტია ან ძნელად ბრუნვადია. | ჭუჭყის ან ნარჩენების დაგროვება; შეზეთვის ნაკლებობა. | Clean the dials with a soft brush. Apply a small amount of graphite powder to the dial mechanism if necessary. Do not use oil. |
9. სპეციფიკაციები
| ფუნქცია | დეტალი |
|---|---|
| მოდელის ნომერი | LD2012EX |
| თავსებადობა | 2005-2015 ტოიოტა ტაკომა |
| მასალა | Domestic 12-gauge cold-rolled steel (body), 10-gauge steel (door plate) |
| საკეტის ტიპი | 4-ნიშნა კომბინირებული საკეტი |
| ფერი | შავი |
| ნივთის წონა | დაახლოებით 10.93 ფუნტი (4.96 კგ) |
| პაკეტის ზომები | 11.75 x 9.5 x 9.38 ინჩი (29.85 x 24.13 x 23.83 სმ) |
| UPC | 851363004989 |
| მწარმოებელი | Lock'er Down. Inc. |
10. გარანტია და მხარდაჭერა
All Lock'er Down Safe products are proudly manufactured in the United States of America and come with a Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use.
For technical assistance, warranty claims, or general inquiries, please contact Lock'er Down customer support:
- ტელეფონი: 800-583-9820
- Webსაიტი: www.lockerdown.com
Please have your product model number (LD2012EX) and purchase information available when contacting support.
