SMALLRIG 3669-CF

SmallRig Advanced Camera Cage Kit Instruction Manual

Model: 3669-CF

1. შესავალი

This manual provides detailed instructions for the assembly, operation, and maintenance of the SmallRig Advanced Camera Cage Kit (Model 3669-CF). This kit is designed to enhance stability during handheld shooting and offers a wide range of accessory mounting options for Sony Alpha 7 V, Alpha 7R V, Alpha 7 IV, and Alpha 7 S III cameras.

2. რა არის ყუთში

The SmallRig Advanced Camera Cage Kit includes the following components:

  • 1 x Cage
  • 1 x HDMI Cable Tie
  • 1 x Locating Handle for ARRI
  • 1 x გვერდითი სახელური
  • 1 x Hex გასაღები
Contents of the SmallRig Advanced Camera Cage Kit

Image: All components included in the SmallRig Advanced Camera Cage Kit.

3. დაყენება და შეკრება

Follow these steps to correctly assemble and attach the cage kit to your camera.

3.1. Camera Preparation

  • Ensure your camera's lens is removed or a small lens is attached to allow clearance during cage installation.
  • For cameras like the Sony Alpha 7S III or Alpha 7 IV, remove the split ring (shoulder strap hook) on the left side of the camera to use the side locking plate.

3.2. Attaching the Camera Cage

  1. Align your Sony Alpha 7 V, A7R V, A7 IV, or A7S III camera with the cage.
  2. Slide the camera into the cage.
  3. Secure the camera to the cage using the integrated 1/4"-20 screw located at the bottom of the cage. Use the provided hex key for tightening.
  4. Depending on your camera model, attach the appropriate side locking plate (one for Alpha 7S III, one for Alpha 7 IV) to prevent twisting. These plates attach to the camera's strap eyelet.
  5. Ensure the camera is firmly seated and does not move within the cage.
SmallRig cage attached to a Sony Alpha camera, showing the three-point locking mechanism.

Image: Three-Point Locking mechanism for securing the camera within the cage.

SmallRig cage with modular design, showing different locking sliders for various Sony Alpha camera models.

Image: Wide compatibility with modular design, illustrating the different locking sliders for various Sony Alpha cameras.

Video: Demonstration of attaching the SmallRig cage to a Sony A7IV camera.

3.3. Attaching the HDMI Cable Clamp

  1. Locate the HDMI cable clamp.
  2. დაამონტაჟეთ კლamp onto the left side of the cage using the 1/4"-20 screw and two locating pins.
  3. Insert your HDMI cable into the clamp and tighten the thumbscrew to secure it. This prevents accidental disconnections and protects the camera's HDMI port.

Note: This cable clamp is not compatible with Sony Alpha 1. When used on the Alpha 7R V camera, the HDMI Cable Clamp interferes with the synchroterminal interface.

SmallRig HDMI cable clamp attached to the camera cage, securing an HDMI cable.

Image: HDMI Cable Clamp included with the kit, demonstrating its attachment and function.

3.4. Attaching the Top Handle

  1. The top handle attaches to the top of the cage via a standard ARRI locating mount.
  2. Align the handle with the ARRI locating holes on the top of the cage and secure it with the integrated screw.
SmallRig ergonomic top handle with multiple mounting points.

Image: Ergonomic top handle design, showing various threaded holes and cold shoe mount.

3.5. Attaching the Side Handgrip

  1. The side handgrip attaches to the NATO rail on the side of the cage.
  2. გაათავისუფლეთ კლamp on the side handgrip, slide it onto the NATO rail, and tighten the clamp to secure it in your desired position.
  3. The height of the handgrip can be adjusted vertically for optimal comfort.
SmallRig aluminum side handle with silicone grip, showing mounting points and adjustment mechanism.

Image: Aluminum side handle, highlighting its comfortable grip and adjustable mounting.

4. Operating the Camera Cage Kit

The SmallRig Advanced Camera Cage Kit provides enhanced functionality and protection for your camera.

4.1. Enhanced Stability and Handling

  • ზედა სახელური: Ideal for low-angle shots and easy carrying. It reduces arm strain during extended shooting sessions.
  • Side Handgrip: Features a silicone insert for a better grip, increasing stability for handheld shooting. It can be adjusted vertically for optimal comfort.

4.2. Multiple Mounting Points

The cage offers various mounting interfaces for attaching accessories:

  • 1/4"-20 Threaded Holes: Numerous points for attaching monitors, magic arms, lights, and other accessories.
  • 3/8"-16 ARRI Locating Holes: Provides secure, anti-twist mounting for ARRI-standard accessories.
  • ცივი ფეხსაცმლის სამაგრები: Integrated cold shoe mounts on the cage and handles for microphones, LED lights, and other shoe-mounted accessories.
  • NATO Rail: Located on the side of the cage for quick attachment and detachment of NATO-compatible accessories, such as the side handgrip.
  • Strap Slots: Allows for attachment of neck or hand straps (sold separately).
  • QD Socket: For quick-release sling swivels.
SmallRig camera cage highlighting various mounting points including 1/4-20 threads, 3/8-16 ARRI locating holes, cold shoes, and NATO rail.

Image: Multiple mounting points available on the camera cage for various accessories.

4.3. Unobstructed Access

The cage is designed to maintain full access to the camera's controls, buttons, hot shoe, and battery compartment, allowing for quick battery changes without removing the camera from the cage.

SmallRig cage showing access to camera controls and battery door.

Image: The cage design ensures precise holes and accurate calibration for full access to camera controls and battery.

5. მოვლა

  • Regularly inspect all screws and connections to ensure they are tight. Use the provided hex key for tightening.
  • Clean the cage with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
  • Store the cage in a dry, dust-free environment when not in use.
  • The built-in protective pads should be checked periodically for wear and tear.

6. Დიაგნოსტიკა

  • Camera not fitting securely: Ensure the correct side locking plate is used for your specific camera model (Alpha 7S III or Alpha 7 IV). Verify that the integrated 1/4"-20 screw at the bottom is fully tightened.
  • HDMI კაბელი Clamp ჩარევა: If using the Alpha 7R V camera, be aware that the HDMI Cable Clamp may interfere with the synchroterminal interface. Adjust placement or consider alternative cable management if necessary. The clamp is not compatible with Sony Alpha 1.
  • Accessories not mounting securely: Check that the accessory's mounting screw or mechanism matches the cage's interface (e.g., 1/4"-20, 3/8"-16 ARRI, cold shoe, NATO rail). Ensure all screws are tightened.

7. სპეციფიკაციები

ფუნქციადეტალი
მოდელის ნომერი3669-CF
თავსებადობაSony Alpha 7 V, Alpha 7R V, Alpha 7 IV, Alpha 7 S III
მასალაალუმინის შენადნობი, უჟანგავი ფოლადი, სილიკონი
პროდუქტის ზომები8.33" სიღრმე x 6.95" სიგანე x 5.31" სიმაღლე (211.5 x 176.5 x 135 მმ)
ნივთის წონა1.23 ფუნტი (556 გრამი)
ფერიშავი
სამონტაჟო წერტილები1/4"-20 threads, 3/8"-16 ARRI locating holes, Cold Shoe, NATO Rail, QD Socket

8. გარანტია და მხარდაჭერა

For warranty information and technical support, please visit the official SmallRig webსაიტზე ან დაუკავშირდით მათ მომხმარებელთა მომსახურების სამსახურს. შეინახეთ თქვენი შესყიდვის ქვითარი გარანტიის ნებისმიერი პრეტენზიისთვის.

Official SmallRig Store: SmallRig Store on Amazon

დაკავშირებული დოკუმენტები - 3669-CF

წინასწარიview SmallRig Full Cage 3667B Sony Alpha 7R V/IV, 7 IV, 7S III, 1-ისთვის - გამოყენების ინსტრუქცია
Sony Alpha 7R V, Alpha 7 IV, Alpha 7S III, Alpha 1 და Alpha 7R IV კამერებისთვის შექმნილი SmallRig 3667B Full Cage-ის დეტალური საოპერაციო ინსტრუქციები და სპეციფიკაციები. გაეცანით მახასიათებლებს, უსაფრთხოებას, თავსებადობას და დამონტაჟების ვარიანტებს.
წინასწარიview SmallRig უნივერსალური სამფეხა Dolly CCP2646 კამერის ჩასადები - გამოყენების ინსტრუქცია
Operating instructions and specifications for the SmallRig Universal Tripod Dolly CCP2646 camera cage, designed for Panasonic Lumix GH5, GH5 II, and GH5S cameras. Features include protection, accessory mounting, and safety guidelines.
წინასწარიview SmallRig Camera Cage for Sony Alpha 7S III (2999) - Operating Instructions
Detailed operating instructions and specifications for the SmallRig Camera Cage (Model 2999) designed for the Sony Alpha 7S III camera. Learn about mounting points, safety guidelines, and product details.
წინასწარიview Sony Alpha 9 III-ის (მოდელი 4533) SmallRig Cage-ის მომხმარებლის სახელმძღვანელო
Sony Alpha 9 III კამერისთვის შექმნილი SmallRig Cage-ის (მოდელი 4533) მომხმარებლის სახელმძღვანელო. შეიცავს დეტალურ ინსტალაციის ინსტრუქციებს, პროდუქტის მახასიათებლებსა და სპეციფიკაციებს.
წინასწარიview SmallRig Cage ჰაერითTag Sony Alpha 7R V/7 IV/7S III-ის სლოტი
SmallRig Cage-ის ჰაერით მუშაობის ინსტრუქცია და პროდუქტის დეტალებიTag სლოტი, შექმნილია Sony Alpha 7R V, 7 IV, 7S III და 1/7R IV კამერებისთვის. მოიცავს სპეციფიკაციებს, ინსტალაციის ეტაპებს და პროდუქტის კომპონენტებს.
წინასწარიview SmallRig HawkLock-ის სწრაფი გამორთვის გალია და გალიების კომპლექტები Sony Alpha 7 სერიის კამერებისთვის - მომხმარებლის სახელმძღვანელო
Sony Alpha 7 სერიის კამერებისთვის განკუთვნილი SmallRig HawkLock-ის სწრაფი გამოშვების გალიისა და გალიის კომპლექტების (მოდელები 4481, 4538, 4539) მომხმარებლის სახელმძღვანელო. მახასიათებლები, პროდუქტის დეტალები და ეტაპობრივი ინსტალაციის სახელმძღვანელოები.