1. შესავალი
The Elcometer 311 FNF Model T is an advanced automotive refinish paint meter designed for fast and accurate measurement of paint thickness on both steel and aluminum substrates. This robust device provides reliable readings in both mils and microns, making it an essential tool for automotive professionals and enthusiasts. Its ergonomic design, durable construction, and wireless connectivity enhance user experience and data management.

This image shows the Elcometer 311 FNF Model T paint meter from the front. The device has an orange and black casing with a digital display showing a measurement of 70 micrometers. Below the screen are several control buttons.
ძირითადი მახასიათებლები:
- Fast Reading Rate: Achieves 60+ readings per minute, significantly reducing inspection times.
- Dual Unit Measurement: Easily switch between mils and microns with a push of a button.
- მკაცრი დიზაინი: Dust and waterproof equivalent to IP64, suitable for various environmental conditions.
- გამძლე ეკრანი: Scratch, solvent, and water-resistant color display for enhanced protection.
- ერგონომიული კომფორტი: Designed for maximum comfort during extended use.
- Automatic Display Rotation: Ensures readability on horizontal and vertical surfaces.
- ატმოსფერული სინათლის სენსორი: Adjusts display brightness for optimal visibility in any lighting.
- Bluetooth დაკავშირება: Wirelessly connect to inspection apps or ElcoMaster for seamless reporting.
2. დაყენება
2.1 შეფუთვა
Carefully remove the Elcometer 311 FNF Model T from its packaging. Inspect the device for any signs of damage. Retain the packaging for future storage or transport.
2.2 ბატარეის დაყენება
The Elcometer 311 requires 2 AA batteries, which are included. To install:
- იპოვეთ ბატარეის განყოფილების საფარი მოწყობილობის უკანა მხარეს.
- გასახსნელად გადაწიეთ ან მოხსენით საფარი.
- ჩადეთ 2 AA ტიპის ელემენტი, დარწმუნდით, რომ სწორი პოლარობა (+/-) არის მითითებული განყოფილებაში.
- უსაფრთხოდ შეცვალეთ ბატარეის განყოფილების საფარი.
2.3 საწყისი ჩართვა
Press and hold the power button (usually located centrally below the screen) until the display illuminates. The device will perform a brief self-test before entering measurement mode.
2.4 Bluetooth კავშირი
The Elcometer 311 features Bluetooth connectivity for data transfer to compatible inspection apps or ElcoMaster software. To connect:
- დარწმუნდით, რომ Bluetooth ჩართულია თქვენს სმარტფონზე ან პლანშეტზე.
- Open the ElcoMaster app or your preferred inspection application.
- Follow the app's instructions to search for and pair with the Elcometer 311. The meter's Bluetooth indicator will typically illuminate when connected.

This diagram shows the Elcometer 311 paint meter on the left, with a measurement of 120 micrometers. To its right, a smartphone is displayed, also showing a measurement of 120.0 micrometers, demonstrating the meter's Bluetooth connectivity and data transfer capability to a mobile device.
3. საოპერაციო ინსტრუქციები
3.1 გაზომვა
To obtain an accurate paint thickness reading:
- დარწმუნდით, რომ მრიცხველი ჩართულია.
- Place the probe of the Elcometer 311 firmly and flatly onto the painted surface you wish to measure.
- Hold the meter steady. The reading will appear almost instantly on the display.
- Lift the meter from the surface to prepare for the next reading. The fast reading rate allows for quick successive measurements.


Left: A hand is shown holding the Elcometer 311 paint meter against the silver painted surface of a car, near the headlight. The meter's display shows a reading of 5.5, indicating a paint thickness measurement. Right: This image features a hand holding the Elcometer 311 paint meter against a dark, possibly black, painted surface. The meter's screen clearly shows a reading of 4.5 mils, indicating the paint thickness.
3.2 Changing Measurement Units (Mils/Microns)
The Elcometer 311 allows you to switch between mils and microns. Refer to your device's specific button layout for the 'Units' or 'Mode' button. Typically, a short press of this button will toggle between the two measurement units.
3.3 წაკითხულის გაგება
The display will show the measured paint thickness. The unit (mils or µm/microns) will be indicated next to the numerical value. The automatic rotating display ensures the reading is always upright, regardless of the meter's orientation. The ambient light sensor adjusts screen brightness for optimal visibility.
The device is designed to operate reliably in both wet and dry conditions due to its IP64 dust and waterproof rating.
4. მოვლა
4.1 დასუფთავება
The Elcometer 311 features a scratch, solvent, and water-resistant display. To clean the device:
- გაწმინდეთ გარე ნაწილი რბილი, დamp ქსოვილი.
- For stubborn marks, use a mild, non-abrasive cleaning solution.
- Avoid using harsh chemicals or abrasive materials that could damage the casing ან ჩვენება.
- Ensure the probe tip is clean and free of debris for accurate measurements.
4.2 ბატარეის გამოცვლა
When the battery indicator on the display shows low power, replace the AA batteries as described in Section 2.2. Always use fresh, high-quality batteries.
4.3 შენახვა
Store the Elcometer 311 in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, it is recommended to remove the batteries to prevent leakage.
5. Დიაგნოსტიკა
This section addresses common issues you might encounter with your Elcometer 311.
| პრობლემა | შესაძლო მიზეზი | გამოსავალი |
|---|---|---|
| მრიცხველი არ ირთვება. | მკვდარი ან არასწორად დამონტაჟებული ბატარეები. | შეცვალეთ ბატარეები, დარწმუნდით, რომ სწორი პოლარობაა. |
| არაზუსტი წაკითხვები. | Dirty probe tip; incorrect calibration; surface irregularities. | Clean probe tip; perform calibration (refer to full manual for calibration steps); ensure surface is clean and flat. |
| Bluetooth კავშირის პრობლემები. | Bluetooth not enabled on device/phone; meter out of range; app issues. | Ensure Bluetooth is on for both devices; move meter closer to phone/tablet; restart app or meter. |
| ეკრანი ბნელია ან არ იკითხება. | Low battery; extreme lighting conditions. | Replace batteries; allow ambient light sensor to adjust, or move to a more suitable lighting environment. |
6. სპეციფიკაციები
Detailed specifications for the Elcometer 311 FNF Model T:
| სპეციფიკაცია | დეტალი |
|---|---|
| მწარმოებელი | ელკომეტრი |
| ბრენდი | ელკომეტრი |
| ნივთის წონა | 5.5 უნცია (156 გრამი) |
| პროდუქტის ზომები | 5.55 x 2.87 x 1.46 ინჩი (14.1 x 7.3 x 3.7 სმ) |
| საქონლის მოდელის ნომერი | 311 |
| მწარმოებლის ნაწილის ნომერი | A311CFNFTI |
| ბატარეები | საჭიროა 2 AA ბატარეა (მოყვება) |
| განსაკუთრებული თვისებები | Waterproof (IP64 equivalent) |
| პირველი ხელმისაწვდომი თარიღი | 7 წლის 2015 სექტემბერი |
7. გარანტია და მხარდაჭერა
7.1 ინფორმაცია გარანტიის შესახებ
Specific warranty terms for the Elcometer 311 FNF Model T are typically provided with the product at the time of purchase or can be found on the official Elcometer website. Please refer to your product documentation or visit the manufacturer's website for detailed warranty coverage and registration information.
7.2 მომხმარებელთა მხარდაჭერა
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Elcometer customer support directly. You can find contact information and additional resources on the official Elcometer webსაიტი:
You may also visit the Elcometer store on Amazon for product information and related accessories: Elcometer Amazon Store