Bihui Reusable Tile Leveling System TSL50 Instruction Manual

1. შესავალი

This manual provides detailed instructions for the proper use and maintenance of the Bihui Reusable Tile Leveling System TSL50. This system is designed to assist in achieving perfectly level tile installations on both floors and walls, effectively preventing lippage and ensuring a professional finish. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

2. პროდუქტი დასრულდაview და კომპონენტები

The Bihui Reusable Tile Leveling System TSL50 is an innovative tool featuring a comfort spin handle and an anti-scratch base. It utilizes a durable 1.5mm steel T-pin for precise tile alignment.

Figure 2.1: Packaging of the Bihui Reusable Tile Leveling System TSL50, showing the product inside.

სურათი 2.2: ახლო ხედი view of a single Bihui Reusable Tile Leveling Tool, highlighting its comfort spin handle and anti-scratch base.

სურათი 2.3: მხარე view of the Bihui Tile Leveling Tool, showing the T-pin extending from the base.

ძირითადი მახასიათებლები მოიცავს:

• Floor and Wall Compatibility: Suitable for various tiling projects.
• Anti-Scratch Large Cap: Designed to protect tile surfaces during leveling.
• Fast Spin-Down Handle: საშუალებას გაძლევთ სწრაფად და მარტივად მოარგოთ დამატებითი ხელსაწყოების გარეშე.
• Reusable Steel 1.5mm T-Pin: Durable and designed for repeated use.
• Tile Thickness Compatibility: Suitable for tiles up to 11/16 inches (approximately 17.5mm) thick.
• Joint Clearance: Accommodates tile clearance up to 1/4 inch (approximately 6.35mm). For wider joints, use classic tile spacers in conjunction with this system.

3. დაყენება

1. მოამზადეთ ზედაპირი: Ensure the subfloor or wall surface is clean, dry, and structurally sound.
2. წაისვით წებოვანი: Spread tile adhesive evenly according to the adhesive manufacturer's instructions.
3. Place First Tile: Lay the first tile into the adhesive, ensuring it is correctly positioned.

4. საოპერაციო ინსტრუქციები

Follow these steps to effectively use the Bihui Reusable Tile Leveling System:

1. Insert the T-Pin: After placing the first tile and before placing the adjacent tile, insert the steel T-pin into the tile joint. Ensure the T-pin is fully seated under the edge of the first tile.
2. Position the Next Tile: Place the next tile adjacent to the first, ensuring the T-pin is now positioned between both tiles.
3. Engage the Leveling Tool: Rotate the comfort spin handle clockwise to lower the anti-scratch base onto the surface of the tiles. Continue spinning until both tiles are perfectly level and lippage is eliminated. The large cap protects the tile surface from scratches.
4. გაიმეორეთ: Continue this process for all tiles, placing leveling tools at appropriate intervals around each tile to ensure consistent leveling.
5. გამაგრების დრო: Allow the tile adhesive to cure completely according to the manufacturer's recommendations. Do not remove the leveling tools before the adhesive has fully set.
6. Remove the Tools: Once the adhesive is fully cured, rotate the comfort spin handle counter-clockwise to disengage the T-pin from the tile joint. Carefully lift the leveling tool.

Figure 4.1: Bihui Reusable Tile Leveling Tools installed on a tiled surface, demonstrating their function in maintaining a level plane.

5. მოვლა

The Bihui Reusable Tile Leveling System is designed for durability and reusability. To ensure a long lifespan:

• დასუფთავება: After each use, thoroughly clean the leveling tools to remove any residual tile adhesive or grout. The tools are fully washable.
• შენახვა: Store the tools in a clean, dry place to prevent damage and corrosion of the steel T-pins.
• ინსპექტირება: Periodically inspect the T-pins for any signs of bending or damage. While durable, improper removal can cause bending.

6. Დიაგნოსტიკა

• Issue: Metal T-pin bends during removal.

  გამოსავალი: Ensure the tile adhesive is completely cured before attempting to remove the leveling tools. Attempting to remove them prematurely can cause the T-pin to bend or damage the tile. Rotate the handle counter-clockwise completely to disengage the pin before lifting.

• Issue: Difficulty removing pins after adhesive has dried.

  გამოსავალი: This can occur if the T-pin was not inserted correctly or if excessive adhesive has cured around the pin. Ensure the T-pin is inserted cleanly into the joint and not embedded in too much adhesive. If removal is difficult, gently wiggle the tool while rotating counter-clockwise. Avoid forceful prying to prevent damage to tiles or the tool.

7. სპეციფიკაციები

8. გარანტია და მხარდაჭერა

For warranty information or technical support regarding your Bihui Reusable Tile Leveling System TSL50, please refer to the manufacturer's official webსაიტზე ან პირდაპირ დაუკავშირდით მათ მომხმარებელთა მომსახურების განყოფილებას. შეინახეთ თქვენი შესყიდვის ქვითარი შეძენის დასადასტურებლად.

Manufacturer: BIHUI