PAC LOC Pro Advanced Audio Integration T-Harness LPHFD31 ინსტრუქციის სახელმძღვანელო

1. შესავალი

The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHFD31) is designed to simplify the installation of aftermarket audio equipment in select Ford vehicles. This vehicle-specific T-harness provides all necessary high-level inputs and speaker outputs, allowing you to add amplifiers and other audio components while retaining your factory radio. It is specifically engineered for OEM non-ampლიფიცირებული სისტემები.

სურათი 1: The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHFD31) showing its various connectors and wiring.

2. ავტომობილის თავსებადობა

This T-Harness is compatible with the following non-amplified Ford vehicles:

• Ford Bronco and Bronco Sport: 2021-2023 (all trim levels)
• Ford Eco Sport: 2018-2022
• Ford Econolain ფურგონი: 2021-2023
• Ford Escape: 2020-2023
• Ford Expedition: 2022-2023
• Ford Explorer: 2020-2023
• Ford F-150: 2021-2023
• Ford F-250/350/450/550: 2020-2023
• Ford Lightning: 2022-2023
• Ford Maverick: 2022-2023
• Ford Mustang Mach E: 2021-2023
• Ford Ranger: 2020-2023
• Ford Transit Connect: 2019-2023

მნიშვნელოვანია: This product is NOT for use in vehicles with a factory ampმაცოცხლებელი.

3. რა არის ყუთში

Your PAC L.O.C. Pro Advanced Audio Integration T-Harness package includes:

• PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHFD31)
• ინსტრუქციის სახელმძღვანელო

4. დაყენება და ინსტალაცია

The LPHFD31 T-Harness simplifies the process of integrating aftermarket audio components into your vehicle's existing non-amplified factory stereo system. It provides clearly labeled pigtail harnesses for front and rear speaker leads, allowing for easy connection to a Line Output Converter (LOC) or directly to an aftermarket amplifier with high-level inputs.

4.1 ინსტალაციის ზოგადი ნაბიჯები

1. გათიშეთ ბატარეა: Before beginning any electrical work, disconnect the vehicle's negative battery terminal to prevent electrical shorts or damage.
2. Access Factory Radio: Carefully remove the vehicle's factory radio to gain access to the wiring harness. Refer to your vehicle's service manual for specific instructions on radio removal.
3. T-აღკაზმულობის შეერთება: Disconnect the factory wiring harness from the back of the radio. Connect the PAC LPHFD31 T-Harness in-line with the factory radio and the vehicle's wiring. The T-Harness will have connectors that match the factory plugs.
4. Identify Speaker Leads: The LPHFD31 T-Harness features clearly labeled pigtail harnesses for front and rear speaker leads. These wires will provide the high-level audio signal from your factory radio.
5. Connect to Aftermarket Equipment:
   • For Line Output Converter (LOC): If using an LOC (e.g., AudioControl LC2i), connect the appropriate speaker leads from the T-Harness to the high-level inputs of the LOC. The LOC will convert these signals to low-level RCA outputs for your aftermarket ampმაცოცხლებელი.
   • For Aftermarket Amplifier with High-Level Inputs: If your aftermarket amplifier accepts high-level inputs, connect the speaker leads directly from the T-Harness to the amplifier's high-level input terminals.
6. Power and Ground Connections: Ensure your aftermarket amplifier and/or LOC receive proper power (+12V), ground, and remote turn-on connections. The T-Harness may provide a remote turn-on output (GTO signal sensing input on some LOCs) or you may need to tap into an accessory wire.
7. მარშრუტის გაყვანილობა: Carefully route all new wiring to avoid interference, pinching, or damage. Secure wiring with zip ties or electrical tape.
8. ხელახლა შეკრება: Once all connections are secure and verified, reassemble the vehicle's dashboard and reconnect the battery.

4.2 Visual Installation Aids

5. ოპერაციული პრინციპები

The PAC LPHFD31 T-Harness is a passive component that facilitates the integration of aftermarket audio equipment. It does not actively process audio signals or control vehicle functions. Its primary role is to provide a clean, accessible point to tap into the factory speaker wiring without cutting or modifying the original harness.

• Signal Transfer: The harness transfers the high-level audio signals from your factory radio to the connected aftermarket devices (e.g., LOC, ampუფრო ცოცხალი).
• Factory Radio Retention: Your factory radio will continue to operate as normal, controlling volume, source selection, and other features. The T-Harness simply provides an output for additional audio components.
• Aftermarket Component Control: The operation and sound quality of your aftermarket audio system will be controlled by the connected LOC, amplifier, and other components. Adjustments to bass, gain, and crossover frequencies will be made on these devices.

6. მოვლა

The PAC LPHFD31 T-Harness requires minimal maintenance. Once installed correctly, it is designed for long-term, reliable operation.

• რეგულარული შემოწმება: პერიოდულად შეამოწმეთ ყველა შეერთება, რათა დარწმუნდეთ, რომ ისინი საიმედოა და კოროზიისგან თავისუფალია.
• სისუფთავე: Keep the area around the harness and connected components clean and free of dust or debris.
• მოერიდეთ ტენიანობას: Ensure the harness and connections are protected from moisture and extreme temperatures.
• პროფესიონალური შემოწმება: If you experience any audio issues after installation, consult a professional car audio technician.

7. Დიაგნოსტიკა

If you encounter issues after installing the PAC LPHFD31 T-Harness, consider the following common troubleshooting steps:

8. სპეციფიკაციები

• ბრენდი: PAC
• მოდელი: LPHFD31
• მასალა: სპილენძი, პოლივინილქლორიდი (PVC)
• ნივთის ზომები (L x W x H): 8 x 5 x 2 ინჩი
• კონექტორის ტიპი: 32-pin კონექტორი
• ნივთის წონა: 5.8 უნცია
• რეკომენდებული გამოყენება: Automotive: Non-amplified Ford Vehicles (2018-2023)
• UPC: 609098900478

9. გარანტია და დახმარება

For specific warranty information and technical support, please refer to the official PAC Audio webსაიტზე ან პირდაპირ დაუკავშირდით მათ მომხმარებელთა მომსახურების სამსახურს. შეინახეთ შეძენის დამადასტურებელი საბუთი გარანტიის ნებისმიერი მოთხოვნისთვის.