WALLBOX Pulsar Plus 48-ის მომხმარებლის სახელმძღვანელოAMP (11.5 კვტ) ელექტრომობილის მე-2 დონის ჭკვიანი დამტენი

1. პროდუქტი დასრულდაview

The Wallbox Pulsar Plus 48AMP (11.5 KW) EV Level 2 Smart Charger is a compact and powerful electric vehicle charging solution designed for residential use. It offers adjustable charging capacity and smart features for convenient and efficient EV charging.

Image: The Wallbox Pulsar Plus 48AMP EV Charger, a compact black unit with the Wallbox logo, shown alongside a smartphone displaying the MyWallbox app interface for managing charging sessions.

2. ძირითადი მახასიათებლები

• Compact Design, Powerful Performance: Adjustable charging capacity from 16A up to 40A or 48A, depending on the specific model.
• Connected and Smart: Connects to your smart devices via the MyWallbox App for wireless control and monitoring using Wi-Fi or Bluetooth.
• Onboard Intelligence: Allows for charging schedule management even without an active internet connection.
• დენის გაზიარება: Capability to connect two or more Pulsar Plus chargers to the same electrical circuit for safe, simultaneous charging of multiple EVs.

Image: A close-up of the Wallbox Pulsar Plus charger highlighting its key features: charging up to 9.6kW, adjustable power from 6A to 40A, built in the United States, scheduled charging for cost savings, and energy management for future-proofing with a Wallbox Power Meter.

Image: A person relaxing on a couch while using the MyWallbox app on a smartphone, demonstrating the app's capabilities to start/stop charging, lock/unlock the charger, set charging schedules, and set power limits.

3. სპეციფიკაციები

Image: Diagram illustrating the compact dimensions of the Wallbox Pulsar Plus charger, measuring approximately 7.9 inches in height, 7.8 inches in width, and 3.9 inches in depth.

4. დაყენება და ინსტალაცია

The Wallbox Pulsar Plus charger is designed for wall mounting and includes a 25ft (7.6m) cable for convenient reach. Due to the electrical nature of this product, professional installation by a qualified electrician is highly recommended to ensure safety and proper functionality. Refer to the detailed installation guide provided with your product for specific wiring and mounting instructions.

The charger is suitable for both indoor and outdoor installations.

5. საოპერაციო ინსტრუქციები

The Wallbox Pulsar Plus is controlled primarily through the MyWallbox App, available for your smart device. Follow these general steps for operation:

1. Download and Install the MyWallbox App: ძიება "MyWallbox" in your device's app store and install it.
2. Connect Your Charger: Follow the in-app instructions to connect your Pulsar Plus charger to your Wi-Fi network or via Bluetooth.
3. Plug In Your EV: Connect the SAE J1772 connector to your electric vehicle's charging port.
4. დატენვის დაწყება/შეჩერება: Use the MyWallbox App to initiate or terminate a charging session.
5. Set Charging Schedules: Utilize the app to program charging times, especially useful for off-peak electricity rates. The onboard intelligence allows these schedules to run even without an internet connection.
6. Adjust Power Limit: The app allows you to set a specific power limit for charging, from 6A up to 48A, depending on your model and electrical setup.
7. Lock/Unlock Charger: Secure your charger by locking it via the app to prevent unauthorized use.

6. მოვლა

To ensure optimal performance and longevity of your Wallbox Pulsar Plus charger, consider the following maintenance guidelines:

• რეგულარული გაწმენდა: Periodically wipe down the exterior of the charger with a soft, damp ქსოვილი. მოერიდეთ აბრაზიულ საწმენდ საშუალებებს ან გამხსნელებს.
• საკაბელო შემოწმება: Regularly inspect the charging cable and connector for any signs of wear, damage, or fraying. Do not use if damage is observed.
• პროგრამული განახლებები: Keep the MyWallbox App and charger firmware updated to ensure access to the latest features and security enhancements.
• გარემოს დაცვა: While designed for outdoor use, ensure the charger is not exposed to extreme conditions beyond its operating specifications.

7. Დიაგნოსტიკა

If you encounter issues with your Wallbox Pulsar Plus charger, refer to the following common troubleshooting tips:

• Charger Not Responding:
  • Check if the charger is properly connected to the power supply.
  • Ensure your Wi-Fi or Bluetooth connection is stable if using the app.
  • Restart the charger by cycling its power at the circuit breaker.
• დატენვა არ იწყება:
  • Verify the charging cable is securely plugged into both the charger and the EV.
  • Check the MyWallbox App for any error messages or scheduled charging conflicts.
  • Ensure your vehicle is ready to accept a charge.
• ნელი დატენვა:
  • Confirm the power limit setting in the MyWallbox App is set to your desired ampგაბრაზება
  • Check your home's electrical panel to ensure the circuit breaker is not tripped and is rated appropriately.
• აპებთან დაკავშირების პრობლემები:
  • Restart your smartphone and the MyWallbox App.
  • Ensure your Wi-Fi network is active and the signal strength is adequate at the charger's location.
  • If using Bluetooth, ensure your device is close to the charger.

For persistent issues or complex problems, consult the full user manual available via the QR code on the product packaging or contact Wallbox customer support.

8. გარანტია და მხარდაჭერა

Wallbox offers support and warranty options for the Pulsar Plus charger. For detailed information regarding your product's warranty, please refer to the official Wallbox webსაიტზე ან თქვენს შენაძენთან ერთად მოწოდებულ დოკუმენტაციაში.

დამატებითი დაცვის გეგმების შეძენა შესაძლებელია:

• 2-წლიანი დაცვის გეგმა
• 3-წლიანი დაცვის გეგმა
• სრული დაცვა (ყოველთვიური გეგმა, რომელიც მოიცავს შესაბამის შესყიდვებს)

The standard return policy allows for refunds/replacements within 30 days of purchase.

დამატებითი დახმარებისთვის ეწვიეთ Wallbox Store on Amazon or contact Wallbox customer service directly.