Einhell AQUINNA 18/28 Power X-Change ბაღის ტუმბოს მომხმარებლის სახელმძღვანელო

1. შესავალი

The Einhell AQUINNA 18/28 Power X-Change garden pump is a cordless, battery-powered device designed for pumping water in various garden applications. It is part of the Einhell Power X-Change system, allowing for flexible use of compatible batteries and chargers (sold separately). This manual provides essential information for the safe and efficient operation, setup, and maintenance of your garden pump.

Please read these instructions carefully before using the pump for the first time and keep them for future reference.

Figure 1: The Einhell AQUINNA 18/28 Power X-Change garden pump, showcasinმისი კომპაქტური დიზაინი და ინტეგრირებული სახელური.

2. უსაფრთხოების ინსტრუქციები

Always observe the following safety precautions to prevent injury and damage to the pump.

ზოგადი უსაფრთხოება

• გამოყენებამდე წაიკითხეთ ყველა ინსტრუქცია.
• დარწმუნდით, რომ ტუმბო მოთავსებულია სტაბილურ, დონის ზედაპირზე.
• Do not operate the pump without water, as this can cause damage.
• ბავშვები და არაუფლებამოსილი პირები მოარიდეთ სამუშაო ადგილს.
• საჭიროების შემთხვევაში, გამოიყენეთ შესაბამისი პირადი დამცავი აღჭურვილობა (PPE).

Electrical Safety (Battery)

• Only use original Einhell Power X-Change batteries and chargers.
• Do not expose batteries to water, heat, or direct sunlight.
• Store batteries in a dry place at room temperature.
• Remove the battery from the pump before any cleaning, maintenance, or storage.

Figure 2: Illustration indicating that the battery and charger are not included with the pump and must be purchased separately.

3. კომპონენტები დასრულდაview

Familiarize yourself with the main components of your Einhell AQUINNA 18/28 garden pump:

1. ტარების სახელური: მარტივი ტრანსპორტირებისთვის.
2. ბატარეის განყოფილება: For inserting the Power X-Change battery.
3. ჩართვა/გამორთვა/რეჟის გადამრთველი: To control pump operation and select power modes.
4. Water Filling Screw: For filling the pump housing with water before operation.
5. Suction Connection (Inlet): Threaded connection for the suction hose.
6. Pressure Connection (Outlet): Threaded connection for the discharge hose.
7. Water Drain Screw: For emptying the pump, especially for frost protection.
8. სამონტაჟო ხვრელები: For securing the pump in a fixed location.

სურათი 3: ახლოდან view of the robust metal threaded connections for suction and pressure hoses on the pump.

4. დაყენება

4.1 ბატარეის დაყენება

1. გახსენით ბატარეის განყოფილების საფარი.
2. Insert a charged Einhell Power X-Change 18V battery into the compartment until it clicks into place.
3. უსაფრთხოდ დახურეთ ბატარეის განყოფილების საფარი.

Figure 4: Demonstrating the correct method for inserting a Power X-Change battery into the pump's battery compartment.

4.2 შლანგების შეერთება

• შეწოვის შლანგი: Connect a suitable suction hose (minimum 1 inch diameter recommended) to the suction connection (inlet) of the pump. Ensure all connections are airtight to prevent air intake, which can reduce pump performance. The maximum suction depth is 6 meters.
• გამონადენი შლანგი: Connect a discharge hose to the pressure connection (outlet) of the pump. Secure all connections with appropriate clampსაჭიროების შემთხვევაში.

4.3 ტუმბოს დაყენება

Before initial operation, the pump housing must be filled with water to ensure proper function and prevent damage.

1. Remove the battery from the pump.
2. Unscrew the water filling screw located on the top of the pump.
3. Carefully fill the pump housing with clean water until it overflows.
4. Replace and tighten the water filling screw securely.

Figure 5: Close-up of the red water filling screw, used to prime the pump with water before operation.

5. საოპერაციო ინსტრუქციები

5.1 ტუმბოს გაშვება

1. Ensure the pump is primed and all hoses are securely connected.
2. ჩადეთ დამუხტული ბატარეა.
3. Move the On/Off/Mode switch to the desired operating mode.

Figure 6: Detail of the On/Off/Mode switch, allowing selection between ECO and BOOST modes.

5.2 დენის რეჟიმი

• ეკო რეჟიმი: Provides maximum battery life with reduced pump pressure. Ideal for lighter watering tasks or when extended run time is required.
• BOOST რეჟიმი: Delivers maximum pump power and pressure (up to 2.5 bar, 25m head). Suitable for demanding applications or when higher flow rates are needed.

5.3 ტუმბოს გაჩერება

To stop the pump, move the On/Off/Mode switch to the "OFF" position. For extended breaks or when finished, remove the battery.

Figure 7: The Einhell AQUINNA 18/28 pump in use, demonstrating its application for garden irrigation from a water source.

6. მოვლა

რეგულარული მოვლა უზრუნველყოფს თქვენი ტუმბოს ხანგრძლივ მუშაობას და ოპტიმალურ მუშაობას.

6.1 დასუფთავება

• After each use, clean the exterior of the pump with a damp ქსოვილი.
• Periodically check the suction filter (if installed) for debris and clean as necessary.
• Ensure no foreign objects enter the pump's inlet or outlet.

6.2 ყინვაგამძლე დაცვა

To prevent damage from freezing temperatures, completely drain the pump before storing it for winter or in cold conditions.

1. ამოიღეთ ბატარეა.
2. გათიშეთ ყველა შლანგი.
3. Unscrew the water drain screw located at the bottom of the pump.
4. Allow all water to drain completely. Tilt the pump if necessary.
5. Replace and tighten the water drain screw.

Figure 8: Close-up of the water drain screw, essential for emptying the pump to prevent frost damage during cold weather.

6.3 შენახვა

Store the pump in a dry, frost-free location, out of reach of children. Ensure the battery is removed before storage.

7. Დიაგნოსტიკა

This section addresses common issues you might encounter with your garden pump.

8. ტექნიკური მახასიათებლები

9. გარანტია და მხარდაჭერა

საგარანტიო ინფორმაცია

Einhell products are manufactured to high-quality standards and undergo strict quality controls. The warranty period for this product is typically 2 years from the date of purchase, as per EU regulations for spare part availability. Please retain your proof of purchase for any warranty claims.

The warranty does not cover damage caused by improper use, normal wear and tear, or failure to follow the instructions in this manual.

მომხმარებელთა მხარდაჭერა

For technical assistance, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact details can usually be found in the packaging or on the Einhell corporate webსაიტი.