OOYCYOO MPPT Solar Charge Controller 60A User Manual

1. შესავალი

The OOYCYOO MPPT Solar Charge Controller 60A is an advanced device designed to manage power flow from your solar panels to your battery bank. It utilizes Maximum Power Point Tracking (MPPT) technology to optimize energy harvesting, ensuring efficient charging for 12V, 24V, 36V, and 48V battery systems. This controller automatically identifies the system voltage and is compatible with various battery types, including lead-acid and lithium.

სურათი 1.1: წინა view of the OOYCYOO MPPT Solar Charge Controller 60A, showing the LCD display and control buttons.

2. პროდუქტის მახასიათებლები

• MPPT ტექნოლოგია: Maximizes power extraction from solar panels.
• ავტომატური სისტემის მოცულობაtage იდენტიფიკაცია: Supports 12V, 24V, 36V, and 48V systems.
• მაღალი ეფექტურობა: DC/DC transfer efficiency up to 98.7%.
• LCD განათების ეკრანი: Provides clear real-time operational data.
• გაფართოებული გაგრილება: Scientifically designed convection cooling with integrated fan for optimal temperature management.
• 4-Stage Battery Charging: Includes Bulk, Boost, Float, and Equalization for efficient and safe battery charging.
• Multi-Battery Compatibility: Supports lead-acid (sealed, gel, flooded) and lithium batteries (LFP), with user-customizable parameters.
• ყოვლისმომცველი დაცვა: Multiple safety features to protect the controller and connected components.
• Negative Ground Design: ზრდის უსაფრთხოებას ოპერაციის დროს.

სურათი 2.1: დასრულდაview of the controller's features, including LCD display, terminals, and protection icons.

3. Safety Precautions and Protection Functions

To ensure safe operation and prevent damage, observe the following safety guidelines. The controller incorporates several protection mechanisms:

• PV Current/Power Overload Protection
• PV Short Circuit Protection
• PV საპირისპირო პოლარობის დაცვა
• Night Reverse Charging Protection
• ბატარეის საწინააღმდეგო პოლარობის დაცვა
• ბატარეის Overvoltage დაცვა
• Battery Over-discharge Protection
• ბატარეის დაცვა გადახურებისგან
• Controller Overheating Protection
• Lithium Battery Low Temperature Protection
• ჩატვირთვა მოკლე ჩართვის დაცვა
• დატვირთვისგან დაცვა
• TVS High Voltage გარდამავალი დაცვა

Always connect the battery first, then the solar panels, and finally the load. Disconnect in the reverse order.

4. დაყენება და ინსტალაცია

Follow these steps for proper installation of your MPPT solar charge controller:

1. მონტაჟი: Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure adequate space around the controller for air circulation.
2. ბატარეის კავშირი: Connect the battery cables to the controller's battery terminals (labeled '+' and '-'). Ensure correct polarity. The controller will automatically detect the battery voltage. Use 10 AWG wires for power terminals.
3. მზის პანელის კავშირი: Connect the solar panel cables to the controller's PV input terminals (labeled 'SOLAR +' and '-'). Ensure correct polarity. Verify that the open circuit voltage (Voc) and power of your solar array do not exceed the controller's maximum limits for your system voltage.
4. დატვირთვის კავშირი (არასავალდებულო): Connect your DC load to the controller's load terminals (labeled 'LOAD +' and '-'). Ensure correct polarity.

Image 4.1: Diagram illustrating the connection of solar panels, battery, and DC load to the MPPT controller. It also shows support for parallel connection of two 60A controllers for a total of 120A.

სურათი 4.2: ყოფილიample of the MPPT Solar Charge Controller integrated into a residential solar power system, managing power for various household appliances.

სურათი 4.3: გვერდი view of the controller highlighting the solar, battery, and load terminals for wiring.

5. საოპერაციო ინსტრუქციები

Once connected, the controller will automatically begin operation. The LCD display provides real-time information:

• PV შეყვანა: აჩვენებს ტtagე და დენი მზის პანელებიდან.
• ბატარეა: აჩვენებს ბატარეის მოცულობასtage, charge status, and percentage.
• ჩატვირთვის გამომავალი: მიუთითებს ტtage and current supplied to the load.

საკონტროლო ღილაკები:

The controller features four buttons (A, B, C, D) and a SET button for navigation and parameter adjustment. Refer to the on-screen menu for specific functions. Pressing A+D for 5 seconds typically initiates a reset.

გაგრილების ვენტილატორის მუშაობა:

The integrated cooling fan activates automatically when the internal temperature exceeds 45°C and deactivates when the temperature drops below 40°C, ensuring optimal performance and longevity.

6. Battery Charging Methods

The OOYCYOO MPPT controller employs a 4-stage charging algorithm to optimize battery health and lifespan:

• ნაყარი გადასახადი: Delivers maximum current to rapidly charge the battery.
• გაზრდის დატენვას: Charges the battery to a higher voltage სრული დატენვის უზრუნველსაყოფად.
• მცურავი დატენვა: ინარჩუნებს ბატარეის დატენვას უსაფრთხო დონეზეtage, compensating for self-discharge.
• გათანაბრება: Periodically overcharges flooded lead-acid batteries to balance cell voltagეს.

Pre-set charging parameters are available for sealed, gel, flooded lead-acid, and LFP (lithium iron phosphate) batteries. Users can also customize charging parameters to suit other battery types or specific requirements.

7. სპეციფიკაციები

Image 7.1: Detailed table showing original battery parameters for 12V, 24V, and 48V systems, including float voltagე, undervoltage protection, and maximum PV input power. Also includes PV module series connection guidelines.

სურათი 7.2: View of the internal components, highlighting the copper coil transformer and capacitance, which contribute to the controller's efficiency and stability.

8. Დიაგნოსტიკა

If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, consider the following general troubleshooting steps:

• ეკრანი/კვება არ არის: Check all wiring connections, especially the battery connection, for proper polarity and secure contact. Ensure the battery has sufficient charge.
• დატენვის გარეშე: Verify solar panel connections and ensure panels are receiving adequate sunlight. Check PV input voltage on the display. Confirm battery connections are secure.
• შეცდომის კოდები: If the LCD displays an error code, refer to the specific error message for guidance. If not listed in this manual, consult the manufacturer's support resources.
• გადახურება: Ensure the controller is installed in a well-ventilated area and that the cooling fan is operating correctly. Clear any obstructions around the vents.

For persistent problems, contact customer support.

9. მოვლა

რეგულარული მოვლა უზრუნველყოფს თქვენი მზის ენერგიის დამუხტვის კონტროლერის ხანგრძლივ მუშაობას და ოპტიმალურ მუშაობას:

• დასუფთავება: Periodically clean the exterior of the controller with a dry cloth to remove dust and debris. Ensure ventilation openings are clear.
• კავშირის შემოწმება: Annually inspect all wiring connections for tightness and corrosion. Re-tighten as necessary.
• გარემოს შემოწმება: Ensure the installation environment remains dry and free from excessive temperatures or humidity.

10. გარანტია და მხარდაჭერა

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further assistance, please contact OOYCYOO customer service.

You may also find additional resources by scanning the QR code on the product label or visiting the following link: http://qr61.cn/oQXA1T/qsECN8rL