Niagara Hydrotech Non-Electric Bidet Seat User Manual

1. შესავალი

Thank you for choosing the Niagara Hydrotech Non-Electric Bidet Seat. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new bidet seat. Please read this manual thoroughly before installation and retain it for future reference.

This bidet seat is designed to provide a hygienic and comfortable cleansing experience without requiring electricity. It features dual wash nozzles for front and rear cleansing, adjustable water pressure, and a soft-close seat for quiet operation.

2. უსაფრთხოების ინფორმაცია

• წყალმომარაგება: Ensure the water supply to the toilet is turned off before beginning installation.
• წყლის წნევა: Do not connect the bidet seat to a hot water supply. This unit is designed for cold water connection only.
• ინსტალაცია: Follow all installation steps carefully. If you are unsure about any step, consult a qualified plumber.
• დასუფთავება: Use mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the product finish or internal components.
• ბავშვები: უყურეთ ბავშვებს, რათა დარწმუნდეთ, რომ ისინი არ თამაშობენ მოწყობილობას.

3. პაკეტის შიგთავსი

ინსტალაციის დაწყებამდე დარწმუნდით, რომ ყველა კომპონენტი ადგილზეა.

Image: All components included in the Niagara Hydrotech Bidet Seat package, including the bidet seat, mounting plate, T-adapter, water supply hose, and mounting hardware.

• Niagara Hydrotech Bidet Seat (Elongated)
• სამონტაჟო ფირფიტა
• სამონტაჟო ჭანჭიკები და საყელურები
• T-Adapter (7/8" x 7/8" x 1/2")
• Braided Metal Water Supply Hose (1/2" x 1/2")
• ინსტალაციის სახელმძღვანელო

4. პროდუქტი დასრულდაview

Familiarize yourself with the different parts of your bidet seat.

სურათი: ზემოდან ქვემოთ view of the Niagara Hydrotech Bidet Seat with the lid open, revealing the dual retractable nozzles.

• კონტროლის ღილაკი: Located on the right side, used to select wash mode and adjust water pressure.
• ორმაგი საქშენები: Retractable nozzles for front and rear wash.
• სწრაფი გამოშვების ღილაკი: Allows for easy removal of the seat for cleaning.
• წყლის შესასვლელი: წყალმომარაგების შლანგის შეერთების წერტილი.
• Soft-Close Lid and Seat: ხელს უშლის დარტყმას და ამცირებს ხმაურს.

5. ინსტალაციის სახელმძღვანელო

This bidet seat is designed for easy DIY installation. No special tools are required beyond a wrench for tightening connections.

5.1 წინასწარი ინსტალაციის შემოწმება

• Ensure your toilet bowl is an წაგრძელებული type. This bidet seat is not compatible with round toilet bowls.

Image: Diagram illustrating the difference between round and elongated toilet bowls, indicating compatibility with elongated bowls.
• Locate the toilet's water supply valve and turn it off. Flush the toilet to drain the tank.
• Place a towel or small bucket under the toilet tank to catch any residual water.

5.2 Removing Your Existing Toilet Seat

1. Lift the hinge covers at the back of your current toilet seat.
2. Unscrew the bolts holding the seat to the toilet bowl. You may need a screwdriver or wrench.
3. Remove the old toilet seat and clean the area thoroughly.

5.3 Installing the Bidet Seat

1. Place the mounting plate over the bolt holes on the toilet bowl. Adjust its position to align with the holes.
2. Insert the mounting bolts through the mounting plate and toilet bowl holes.
3. Secure the bolts from underneath the toilet bowl using the washers and nuts. Do not overtighten yet, allowing for minor adjustments.
4. Slide the Niagara Hydrotech Bidet Seat onto the mounting plate until it clicks into place.

Image: The Niagara Hydrotech Bidet Seat fully installed on a toilet, showing the water connection hose.
5. Adjust the seat's position for a comfortable fit, then fully tighten the mounting bolts.

5.4 წყალმომარაგების მიერთება

1. Disconnect the existing water supply hose from the toilet tank's fill valve.
2. Install the T-adapter onto the toilet tank's fill valve. Ensure the rubber washer is properly seated to prevent leaks.
3. Reconnect the original toilet water supply hose to the top of the T-adapter.
4. Connect one end of the provided braided metal water supply hose to the side of the T-adapter.
5. Connect the other end of the braided metal water supply hose to the water inlet on the bidet seat.
6. Slowly turn on the toilet's water supply valve. Check for any leaks at all connection points. Tighten connections gently if leaks are observed.

6. ოპერაცია

The Niagara Hydrotech Bidet Seat is simple to operate using the control knob located on the right side.

სურათი: ახლო ხედი view of the control knob on the side of the bidet seat, used for adjusting water pressure and selecting wash modes.

6.1 Wash Options

Image: Detail of the dual nozzles, illustrating their function for both front and rear cleansing.

• უკანა სარეცხი: Turn the control knob towards the "Rear" icon. The rear nozzle will extend and spray water.
• წინა სარეცხი: Turn the control knob towards the "Front" icon. The front nozzle will extend and spray water.

6.2 Adjusting Water Pressure

• While a wash option is selected, continue to rotate the control knob further in the chosen direction to increase water pressure.
• Rotate the knob back towards the center to decrease water pressure.
• To stop the wash, return the control knob to the central "Off" position. The nozzles will retract automatically.

7. მოვლა და დასუფთავება

Regular cleaning ensures optimal performance and hygiene of your bidet seat.

7.1 Routine Cleaning (Quick Release)

Image: A close-up of the quick release button located on the side of the bidet seat, designed for easy removal for cleaning.

1. Press the Quick Release button located on the side of the bidet seat.
2. Slide the bidet seat forward and lift it off the mounting plate.
3. Clean the bidet seat and the toilet bowl area with a mild, non-abrasive cleaner and a soft cloth.
4. Realign the bidet seat with the mounting plate and slide it back until it clicks into place.

7.2 Nozzle Cleaning

• The nozzles are self-cleaning and retract behind a gate after each use.
• For deeper cleaning, gently pull out the nozzles manually and wipe them with a soft cloth and mild soap. Do not use harsh chemicals or abrasive materials.
• Ensure the nozzles retract fully after cleaning.

8. Დიაგნოსტიკა

9. სპეციფიკაციები

• მოდელი: WP-EL0621
• ტიპი: Non-Electric Bidet Seat
• თავსებადობა: წაგრძელებული ტუალეტის თასები
• მასალა: პლასტიკური
• ფერი: თეთრი
• პროდუქტის ზომები: 18.63" სიგრძე x 15.25" სიგანე
• ნივთის წონა: 6.36 ფუნტი
• წყლის კავშირი: მხოლოდ ცივი წყალი
• UPC: 732291500012
• მწარმოებელი: ნიაგარა

10. გარანტია და დახმარება

Niagara products are manufactured to high-quality standards. For warranty information or technical support, please contact Niagara customer service.

• მომხმარებელთა მომსახურება: Refer to the contact information provided on the product packaging or the official Niagara webსაიტი.
• ონლაინ რესურსები: ეწვიეთ Niagara Store on Amazon პროდუქტის დამატებითი ინფორმაციისთვის და მხარდაჭერისთვის.