ZIPRO Core დასაკეცი მრავალფუნქციური წონის სკამი ინსტრუქციის სახელმძღვანელო

1. შესავალი

Thank you for choosing the ZIPRO Core Foldable Multi-purpose Weight Bench. This manual provides essential information for the safe and effective assembly, operation, and maintenance of your new fitness equipment. Please read this manual thoroughly before use and keep it for future reference.

Figure 1.1: The ZIPRO Core Foldable Multi-purpose Weight Bench in its assembled state.

2. უსაფრთხოების ინფორმაცია

Your safety is paramount. Adhere to the following safety guidelines at all times:

• ნებისმიერი ახალი სავარჯიშო პროგრამის დაწყებამდე გაიარეთ კონსულტაცია ექიმთან.
• Ensure all bolts, nuts, and other connections are securely tightened before each use. Regularly check for loose parts.
• Place the bench on a flat, stable, and non-slip surface. Ensure adequate clear space around the bench for safe operation.
• Do not exceed the maximum weight capacities:
  • Total maximum load capacity: 230 კგ
  • მომხმარებლის მაქსიმალური წონა: 120 კგ
  • Maximum bar support capacity: 180 კგ
• მოარიდეთ ბავშვები და შინაური ცხოველები მოწყობილობისგან გამოყენებისას.
• Do not modify the equipment. Use only original replacement parts if needed.
• დაუყოვნებლივ შეწყვიტეთ ვარჯიში, თუ გრძნობთ ტკივილს, თავბრუსხვევას ან გულისრევას.
• ვარჯიშის დროს ჩაიცვით შესაბამისი სპორტული ფეხსაცმელი და ტანსაცმელი.

Figure 2.1: Illustration of the bench's robust design and weight capacities.

3. პაკეტის შიგთავსი

Upon opening the package, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support immediately.

The package should contain all necessary structural components, hardware (bolts, nuts, washers), and tools required for assembly.

4. შეკრება და დაყენება

Follow these general steps for assembly. Refer to the included assembly diagram for detailed instructions specific to your model.

1. გახსენით ყველა კომპონენტი და დაალაგეთ სუფთა, ბრტყელ ზედაპირზე.
2. Identify all parts against the parts list in your assembly diagram.
3. Begin by attaching the main support frames. Ensure all connections are aligned correctly before tightening.
4. Secure the bench pad to the main frame.
5. Install the adjustable bar supports and push-up handles. Ensure they slide smoothly and lock securely into place.
6. Attach the non-slip feet to the base of the bench and support frames.
7. Once fully assembled, double-check all bolts and nuts to ensure they are securely tightened.

Figure 4.1: Key assembly points including the folding pin, adjustment knob, and stable feet.

Figure 4.2: The bench in its folded position, demonstrating space-saving design.

5. საოპერაციო ინსტრუქციები

The ZIPRO Core bench offers versatility for various strength training exercises. Familiarize yourself with its adjustment mechanisms:

5.1. Bench Adjustments

• Bench Pad Position: The bench pad can be adjusted to two positions: flat and negative incline. To adjust, locate the adjustment pin or lever beneath the bench pad, pull it out, set the desired angle, and ensure the pin locks securely into place.
• Bar Support Height: The bar supports can be adjusted to seven different heights, ranging from 70 cm to 105 cm from the ground. To adjust, loosen the knob on the support upright, pull the adjustment pin, slide the support to the desired height, and re-secure the pin and tighten the knob.

Figure 5.1: The bench adjusted to an inclined position for various exercises.

Figure 5.2: Close-up of the adjustable bar supports and integrated push-up handles.

5.2. სავარჯიშო Examples

The ZIPRO Core bench is suitable for a wide range of exercises, including but not limited to:

• სკამების პრესა: Use the adjustable bar supports for barbell exercises.
• ჰანტელებით ვარჯიშები: Perform chest presses, flyes, rows, and bicep curls.
• მუცლის ვარჯიშები: Utilize the negative incline position for crunches and sit-ups.
• Push-ups/Dips: Use the integrated handles for bodyweight exercises.

Figure 5.3: User demonstrating a barbell bench press exercise.

Figure 5.4: Various exercises possible with the ZIPRO Core bench, including abdominal work and dumbbell rows.

6. მოვლა

Regular maintenance ensures the longevity and safe operation of your ZIPRO Core bench:

• დასუფთავება: Wipe down the bench pad and frame with a damp ყოველი გამოყენების შემდეგ ნაჭერი ოფლისა და ჭუჭყის მოსაშორებლად. საჭიროების შემთხვევაში გამოიყენეთ რბილი საპონი, მაგრამ მოერიდეთ აგრესიულ ქიმიკატებს.
• ინსპექტირება: Periodically inspect all moving parts, bolts, and welds for signs of wear, damage, or loosening. Tighten any loose connections immediately.
• შენახვა: When not in use, the bench can be folded for compact storage. Store it in a dry place, away from direct sunlight and extreme temperatures.

Figure 6.1: Dimensions of the bench, useful for planning storage space.

7. Დიაგნოსტიკა

If you encounter issues with your ZIPRO Core bench, refer to the following common solutions:

8. სპეციფიკაციები

Figure 8.1: Detail of the sturdy metal frame construction.

9. გარანტია და მხარდაჭერა

ZIPRO products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or visit the official ZIPRO webსაიტი. ასევე შეგიძლიათ დახმარებისთვის პირდაპირ გამყიდველს დაუკავშირდეთ.

For customer service inquiries, please have your model number (11926649) and purchase date ready.