1. შესავალი
Thank you for choosing the Wave Aegean 6-Person Inflatable Hot Tub. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your hot tub. Please read all instructions carefully before installation and use to ensure proper function and longevity of your product.

Image 1.1: The Wave Aegean 6-Person Inflatable Hot Tub in its assembled state.
2. უსაფრთხოების ინფორმაცია
დაზიანების ან დაზიანების თავიდან ასაცილებლად, ყოველთვის დაიცავით შემდეგი უსაფრთხოების ინსტრუქციები:
- Do not permit children to use the hot tub without adult supervision.
- Pregnant women, individuals with heart disease, high blood pressure, diabetes, or other health conditions should consult a physician before using the hot tub.
- Avoid using the hot tub immediately after strenuous exercise.
- The water temperature should not exceed 104°F (40°C). A temperature between 100°F (38°C) and 102°F (39°C) is generally recommended.
- Do not operate the hot tub if it is damaged or malfunctioning.
- Ensure the electrical supply meets the product specifications and is protected by a Residual Current Device (RCD).
- Never add water to chemicals; always add chemicals to water to avoid strong fumes or violent reactions.
3. კომპონენტების საკონტროლო სია
Before beginning setup, verify that all components are present:
- Inflatable Hot Tub Liner
- Integrated Heater/Pump Unit
- Top Cover with Safety Clips
- ინფლაციის შლანგი
- Filter Cartridges (2x)
- Filter Covers (2x)
- სარემონტო ნაკრები
- Air Valve Cap
- შესანახი ჩანთა

Image 3.1: Included accessories such as filters, inflation hose, repair kit, and air valve cap, alongside the wired controller.
4. დაყენების ინსტრუქციები
The Wave Aegean hot tub is designed for a quick setup, typically within 15 minutes.
4.1 საიტის შერჩევა
Choose a flat, level surface capable of supporting the weight of the hot tub filled with water and occupants (approximately 240 gallons + 6 people). Ensure the area is free from sharp objects and has access to a suitable electrical outlet with RCD protection.
4.2 ინფლაცია
- Unfold the hot tub liner on the selected site.
- Connect the inflation hose to the hot tub's air valve and the integrated pump unit.
- Plug in the pump unit and activate the inflation function. Inflate until the hot tub walls are firm to the touch, but not over-inflated.
- Disconnect the inflation hose and securely close the air valve cap.
4.3 წყლით შევსება
Fill the hot tub with fresh water using a garden hose. Fill to the recommended water level indicated on the inside of the hot tub liner.
4.4 ფილტრის დაყენება
Install the two filter cartridges into their respective housings inside the hot tub, ensuring they are securely threaded. Place the filter covers over them.

Image 4.1: Visual representation of key features including 15-minute tool-free setup, 600W bubble blower, 1350W integrated heater, and 15' waterproof cable with RCD plug.
5. საოპერაციო ინსტრუქციები
The integrated control unit manages all hot tub functions.
5.1 მართვის პანელის ფუნქციები
The wired controller allows easy management of spa settings:
- გამათბობლის ღილაკი: Activates the 1350W integrated heater to warm the water up to 104°F (40°C).
- ბუშტის ღილაკი: Engages the 130 Aquajet massage system (600W bubble blower).
- ფილტრის ღილაკი: Activates the clean performance filtration system.
- ტემპერატურის რეგულირება: Use the Up/Down arrows to set your desired water temperature.
- ტაიმერის ღილაკი: Set the integrated timer for heating cycles.
- დაბლოკვის ღილაკი: ბლოკავს მართვის პანელს შემთხვევითი ცვლილებების თავიდან ასაცილებლად.
5.2 ყინვისგან დაცვა
The hot tub features an anti-freeze protection system. When the ambient temperature drops below a certain threshold, the heater will automatically activate to prevent water from freezing, protecting the internal components. Ensure the hot tub remains plugged in during cold weather conditions.
6. მოვლა
Regular maintenance is crucial for the performance and longevity of your hot tub.
6.1 ფილტრაციის სისტემა
The integrated filtration system uses replaceable threaded filters to keep your water clean. Check and clean the filter cartridges regularly (daily or every other day depending on usage) by rinsing them with a garden hose. Replace filters every 1-2 weeks or when they appear worn or discolored.
6.2 წყლის დამუშავება
Maintain proper water chemistry using appropriate hot tub chemicals (e.g., sanitizers, pH adjusters). Test the water regularly and adjust chemical levels as needed to ensure safe and clean water.
6.3 დრენაჟი და გაწმენდა
Drain the hot tub completely every 1-3 months, depending on usage. Clean the interior surface with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
7. Დიაგნოსტიკა
ეს განყოფილება განიხილავს გავრცელებულ პრობლემებს, რომლებსაც შეიძლება წააწყდეთ.
7.1 ჯაკუზი არ თბება
- დარწმუნდით, რომ გამათბობლის ღილაკი გააქტიურებულია მართვის პანელზე.
- Check that the desired temperature is set higher than the current water temperature.
- Verify that the power supply is stable and the RCD has not tripped.
- Ensure filter cartridges are clean and not obstructing water flow.
7.2 Water Leaking
- Inspect all connections between the hot tub liner and the pump unit for tightness.
- Check the hot tub liner for any visible punctures or damage. Use the provided repair kit for minor leaks.
- Ensure the air valve cap is securely closed.
7.3 შეცდომის კოდები
If an error code appears on the control panel (e.g., 'HL' for high limit), consult the specific error code section in the full manual or contact customer support for assistance.
8. სპეციფიკაციები
| ფუნქცია | სპეციფიკაცია |
|---|---|
| ბრენდი | ტალღა |
| მოდელის სახელი | AEG6NAVYUS |
| ფერი | Aegean Navy |
| პროდუქტის ზომები | 77" სიგრძე x 77" სიგანე x 25.6" სიმაღლე |
| მასალა | პოლივინილ ქლორიდი (PVC) |
| ფორმა | Rectangular (Octagონალი) |
| ტევადობა | 240 გალონი |
| დასაჯდომი ტევადობა | 6 პირი |
| თვითმფრინავების რაოდენობა | 130 Aquajets |
| გამათბობელი სიმძლავრე | 1350W (up to 104°F) |
| Bubble Blower Power | 600 W |
| საჭიროა შეკრება | No (Tool-free setup) |
9. გარანტია და მხარდაჭერა
Your Wave Aegean Hot Tub is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official WAVE website. For technical support, troubleshooting assistance, or to order replacement parts, please contact WAVE customer service through their official channels.





