შესავალი
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sharkoon VK4 Rainbow ATX PC Case. The VK4 Rainbow is designed with a minimalist exterior featuring a perforated front panel and includes four pre-installed 120mm fans with rainbow effect for optimal airflow. It offers ample space for large hardware components and supports radiators up to 360mm, alongside features for clean cable management.

სურათი 1: დახრილი view of the Sharkoon VK4 Rainbow ATX PC Case, highlighting its perforated front and pre-installed rainbow fans.
პროდუქტი დასრულდაview
The Sharkoon VK4 Rainbow ATX PC Case is engineered for efficient cooling and hardware compatibility. Key features include:
- Superior Cooling: Equipped with four pre-installed 120mm rainbow effect fans for excellent airflow. Additional fan mounting options are available.
- წყლის გაგრილების მხარდაჭერა: The front panel supports radiators up to 360mm, and the top panel accommodates radiators up to 280mm.
- ფართო ინტერიერი: Designed to house large components such as graphics cards up to 35cm, CPU coolers up to 16cm, and power supplies up to 21cm.
- Ampშენახვა: Supports up to two 3.5" HDDs or four 2.5" SSDs.
- მოსახერხებელი კავშირი: Top panel features two USB 3.0 ports and a TRRS port for easy access.
- ორგანიზებული ინტერიერი: Generous space for cable management and pre-installed dust filters at all air intake points for cleanliness.
საქმის კომპონენტები

სურათი 2: წინა view with perforated panel and three 120mm rainbow fans.

სურათი 3: მხარე view შოუasing the tempered glass panel.

სურათი 4: უკანა view with I/O shield area, expansion slots, and exhaust fan.

Figure 5: Top I/O panel with USB 3.0 ports and TRRS audio jack.
დაყენება და ინსტალაცია
Follow these steps to install your PC components into the Sharkoon VK4 Rainbow case.
1. საქმის მომზადება
- Carefully unpack the case and remove all packaging materials.
- Remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling it open.
- Remove the opposite metal side panel to access the cable management area.

Figure 6: Internal layout of the VK4 Rainbow case, ready for component installation.
2. დედაპლატის მონტაჟი
- The VK4 Rainbow supports Mini-ITX, Micro-ATX, and ATX motherboards.
- დაამონტაჟეთ I/O ფარი კორპუსის უკანა მხარეს არსებულ ჭრილში.
- Align your motherboard with the pre-installed standoffs and secure it with screws. Ensure all standoffs are used for proper support.
3. კვების წყაროს (PSU) მონტაჟი
- Install the PSU into the dedicated compartment at the bottom rear of the case.
- დაამაგრეთ კვების ბლოკი კორპუსის უკანა მხრიდან ხრახნებით.
4. მეხსიერების დისკის ინსტალაცია
- The case supports up to two 3.5" HDDs or four 2.5" SSDs.
- Mount 3.5" HDDs in the drive cage located under the PSU shroud.
- Mount 2.5" SSDs on the dedicated mounting points behind the motherboard tray or on top of the PSU shroud.
5. გრაფიკული ბარათის და გაფართოების ბარათის ინსტალაცია
- მოხსენით საჭირო გაფართოების სლოტების გადასაფარებლები კორპუსის უკანა მხარეს.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard and secure them with screws.
6. კაბელის მენეჯმენტი
კაბელების ორგანიზებისთვის გამოიყენეთ დედაპლატის უჯრის უკან არსებული კაბელების გაყვანისა და შემაკავშირებელი წერტილები. ეს აუმჯობესებს ჰაერის ნაკადს და ესთეტიკას.

Figure 7: Cable management area behind the motherboard tray.
ოპერაცია
Front Panel Connectivity
The top panel of the VK4 Rainbow case provides convenient access to essential ports:
- 2x USB 3.0 პორტი: თავსებადი მოწყობილობებით მაღალსიჩქარიანი მონაცემთა გადაცემისთვის.
- 1x TRRS Port: A combined audio jack for headsets with a single 3.5mm plug (microphone and audio).
- დენის ღილაკი: To turn your system on/off.
- გადატვირთვის ღილაკი: To restart your system.
გულშემატკივართა ოპერაცია
The four pre-installed 120mm rainbow effect fans are connected via Molex connectors. Due to this connection type, the fans operate at a constant speed and their speed cannot be adjusted via the motherboard. This ensures consistent airflow but may result in a noticeable fan noise level.
მოვლა
რეგულარული მოვლა უზრუნველყოფს თქვენი კომპიუტერის კომპონენტების ოპტიმალურ მუშაობას და ხანგრძლივ მუშაობას.
მტვრის ფილტრის გაწმენდა
- The VK4 Rainbow features pre-installed dust filters at all air intake points (front, top, and bottom).
- Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling.
- Filters can typically be cleaned with compressed air or by rinsing with water and allowing them to dry completely before reinstallation.
ზოგადი წმენდა
- Use a soft, dry cloth to wipe down the exterior surfaces of the case.
- For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid streaks.
- Ensure the system is powered off and unplugged before performing any cleaning inside the case.
პრობლემების მოგვარება
ეს განყოფილება განიხილავს გავრცელებულ პრობლემებს, რომლებსაც შეიძლება წააწყდეთ.
- High Fan Noise: The pre-installed fans are connected via Molex and operate at a constant speed. If fan noise is a concern, consider replacing the fans with PWM-controlled alternatives that can be regulated by your motherboard.
- ჰაერის ცუდი ნაკადი/გადახურება:
- Check if dust filters are clean and not obstructed.
- დარწმუნდით, რომ ყველა კორპუსის ვენტილატორი სწორად ბრუნავს.
- Verify that cables are neatly managed and not blocking airflow paths.
- საკაბელო მენეჯმენტის სირთულე: While the case offers space, complex builds with many components may require careful planning. Utilize cable ties and routing channels effectively.
- წინა პანელის პორტები არ მუშაობს:
- Ensure the front panel connectors (USB 3.0, audio, power, reset) are correctly plugged into the motherboard headers.
- Check your motherboard manual for correct header pinouts.
სპეციფიკაციები
| ფუნქცია | დეტალი |
|---|---|
| ბრენდი | შარკუნი |
| მოდელის სახელი | VK4 ცისარტყელა |
| საქონლის მოდელის ნომერი | SHA-VK4-RAINBOW BK |
| საქმის ტიპი | ATX Tower |
| დედაპლატის თავსებადობა | Mini-ITX, Micro-ATX, ATX |
| ფერი | შავი |
| მასალა | მეტალი |
| პროდუქტის ზომები (L x W x H) | 40.4 x 20.6 x 48.7 სმ |
| ნივთის წონა | 7.12 კგ |
| წინასწარ დაინსტალირებული ფანები | 4x 120mm Rainbow Effect Fans |
| მაქს. გრაფიკული ბარათის სიგრძე | 35 სმ |
| მაქს. CPU ქულერის სიმაღლე | 16 სმ |
| მაქს. PSU სიგრძე | 21 სმ |
| რადიატორის საყრდენი (წინა) | 360 მმ-მდე |
| რადიატორის საყრდენი (ზედა) | 280 მმ-მდე |
| Drive Bays | 2x 3.5" HDD or 4x 2.5" SSD |
| წინა I/O | 2x USB 3.0, 1x TRRS Audio |
გარანტია და მხარდაჭერა
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon website. If you require technical assistance or have questions not covered in this manual, please contact Sharkoon customer support through their official channels.
მწარმოებელი: Sharkoon Technologies GmbH
Webსაიტი: www.sharkoon.com





