BowFlex BFX,T16 Update Console User Guide

BFX,T16 Update Console

„

პროდუქტის სპეციფიკაციები:

• Model: BowFlex Console
• Compatibility: All BowFlex equipment with console update
  უნარი
• Storage: USB flash drive (16GB or 32GB, formatted to
  FAT32)
• Software Update Time: Download and unzipping process may take
  several minutes; Console software update may take 45 minutes

პროდუქტის გამოყენების ინსტრუქცია:

1. Visit the BowFlex Software Updates page and download the
   software package for your model.
2. Insert a USB flash drive (16GB or 32GB, formatted to FAT32)
   თქვენი კომპიუტერის USB პორტში.
3. Extract the downloaded software folder to the USB flash drive
   შეცვლის გარეშე file გზა.
4. Eject the flash drive from your computer and insert it into the
   console USB port of your BowFlex equipment.
5. Access the console home screen, navigate to Settings, then
   მანქანის პარამეტრები.
6. Select Update > Update from USB > UPDATE on the Machine
   პარამეტრების ეკრანი.
7. Wait for the console to complete the update process without
   removing the flash drive or powering off the machine.
8. After the update is done, reboot the console by turning off the
   power switch, removing the flash drive, and turning the power back
   on.
9. Check the software version in the General settings on the
   console to verify a successful update.

ხშირად დასმული კითხვები:

Q: Can I use a different size USB flash drive for the
განახლება?

A: It is recommended to use a 16GB or 32GB USB flash drive
formatted to FAT32 for the update to ensure compatibility and
sufficient storage capacity.

Q: What should I do if the console update fails?

A: If the update fails, check that the file path was not changed
during extraction, and retry the update process. Ensure that the
power is stable throughout the update.

„`

Updating Your BowFlex Console
1. On the BowFlex Software Updates page, click the software link for your model to download the newest software package.
Note: Due to the large file size, the download and unzipping process may take several minutes, and the console software update may take another 45 minutes to complete. 2. Insert a USB flash drive (16GB or 32GB, blank, formatted to FAT32) into your computer’s USB port. 3. Within your computer Downloads folder, select and then right-click the zipped software folder. Select “Extract All…”

2025 წლის ოქტომბერი

1

4. Click Browse to find the USB disk drive where you will extract the files.

5. Click “USB DISK”, then click Select Folder.

Note: The flash drive shown in this example is USB DISK (E:), but flash drives can have different names (like Disk or Drive) and letters (like D, E, or F), depending on the computer.

2025 წლის ოქტომბერი

2

6. Click Extract.
The software extracts to your flash drive. Important: Do not change or rename the file path or your update will fail.

2025 წლის ოქტომბერი

3

7. Right-click on USB DISK (E:) and select “Eject”. Remove the flash drive from your computer.
8. Power on your BowFlex equipment. 9. Plug the flash drive into the console USB port. 10. On the console home screen, press the Settings ( ) icon.

2025 წლის ოქტომბერი

4

11. Select Machine Settings.

12. On the Machine Settings screen, press Update > Update from USB > UPDATE.

Do not remove the flash drive or power off the machine–Wait for the console to update and return to the home screen.
13. After the update completes, reboot the console by turning off the power switch at the base of the machine, remove the flash drive from the USB port, then turn the power switch back on.
14. From the console home screen, press the Settings ( ) icon > Machine Settings > General. Check the software version on the screen to confirm that the update was successful.

2025 წლის ოქტომბერი

5

დოკუმენტები / რესურსები

BowFlex BFX,T16 Update Console [pdf] მომხმარებლის სახელმძღვანელო BFX, T16, Update Console, Update Console, Console

ცნობები

• მომხმარებლის სახელმძღვანელო