Inner Range Cellguard Intercom Plugin User Manual

შესაძლებლობა	Cell Guard
Intercom Call Control
Make Intercom Calls
Terminate Intercom Calls
Answer Intercom Calls
Forward Intercom Calls	JC
Place Intercom Calls On Hold	JC
Specify Call Urgency When Creating Calls	JC
Make/Terminate PA Calls
Make/Terminate Group PA Calls
ინტერკომის კონტროლი
Adjust Intercom Call Volume	JC
Restart Intercom Points Remotely
Control Music Streaming Function Of Intercom	JC
Covertly Monitor Intercoms
Activate Intercom Door/Relay	JC
Simulate Button Press on Intercom Point	JC
Soft Button Intercom Push-To-Talk	JC
Soft Button PA System Push-To-Talk	JC
View Live Video Footage From Compatible Intercom Points	JC

შესაძლებლობა	Cell Guard
სისტემის ინტეგრაცია
Multisite Operation
Trigger Intercom Command on Integriti Event
Control Integriti Door on Intercom Event
Status & Event Monitoring
Monitor Endpoint Status Changes (Online/Offline/Alarm/Call State)
Monitor System Controller Connection Status
Logging of Intercom Events
Pending Intercom Call Notification (Call Queue)	C
Notification of Intercom Calls
Integriti System Control
Control Intercoms Based on Alarms/Events from third party Systems (i.e. CCTV).
Automatically Control Integriti Objects Based on events from Intercom
Automatically Control third party Systems (i.e. CCTV) based on Events from Intercom
Integriti Schematics
Display Intercoms on Schematics
Change Display of Intercoms Based on Status
Control Intercoms from schematics

შენიშვნა: Support for any feature listed above may be model or version specific – further consultation with Inner Range and the Intercom manufacturer is highly recommended.

საჭირო Integriti ვერსიის ლიცენზია	The Integriti CellGuard Intercom Integration requires an Integriti Pro/Infiniti v20 license or higher to be present on the product key running the integration.
მინიმალური დაინსტალირებული Integriti ვერსია	The Integriti CellGuard Intercom Integration is only compatible with an installation of Integriti Pro or Infiniti that is v19.0 or higher.
ლიცენზირება	The Intercom Integration license is required to use the CellGuard Plugin
გამოცდილი წინააღმდეგ	The Integriti CellGuard Intercom plugin was built and tested against the following CellGuard software: CellGuard ACM upgrade 24

INSTALLATION/UPDATING

შენიშვნა: When installing multiple Integriti Integration Plugins, the plugin with the highest build number should be installed last. The build number can be found in brackets in the file name of the installer for the plugin.
Close all instances of the Integriti software suite and stop the Integriti Integration Server service.
Download and run the plugin installer on the server and client workstations.

Integriti_Intercom_CellGuard_Plugin_x.x_(xxxxx).exe

After the installation has completed, you will need to restart the Integration Server service.
On the Integriti server, start the Integriti System Designer as an administrator. Click one of the Integration service icons on the bottom left of the login dialog to stop and start the selected service.

ჩარიცხვა
Integriti Pro/Infiniti Configuration: To enroll a Cell Guard Intercom Server

დააწკაპუნეთ ჩანართი მოჰყვა
Select CellGuard Intercom from the list that appears and click
In the editor window that appears, give the new Intercom System a name.
Tick ზემოთ tab if events are to be received from the CellGuard server.
Select the Integriti Integration server that will be used for the integration.
Enter the necessary settings for the plugin.

მოწყობილობის ატრიბუტები

კავშირი

Port – The Port used to connect to the Server. This is 22222 by default.
This port should be configured in the Integriti Integration Server and any Integriti Client Machine’s firewalls to allow it to be used.
External Device Identifier – The Identifier of the External Device configured in the CellGuard ACM file.
Address – The IP Address of the Server to connect to.

კონფიგურაცია

ACM Site Config Directory – Select the directory of the ACM Site Config file. This will be used to populate the Intercom Points in Integriti from all Node and Call elements in the ACM Site Config file.

მონიტორინგი

Message Types – Allows the types of Events received from the Server to be filtered based on event type.
Select the event types to be monitored from the dropdown list.
Monitor Events – Set to true to enable monitoring of Events from the connected Server.
Only Events of types selected in the ‘Events’ property will be monitored.
Events will only be received when ‘Maintain Persisted Connection’ is selected.
Monitor Intercom State – Set to true to enable monitoring of Intercom State changes from the connected Server. The state of configured Intercom Points in Integriti will be updated as the associated Intercom’s state changes in the server.
Intercom State changes will only be received when ‘Maintain Persisted Connection’ is selected.

რუკები

Workstation To Station Number Map – A set of mappings of Workstation Host Names to CellGuard Intercoms. This allows specific intercoms to be associated with an Integriti workstation for use in Workstation-specific commands. NOTE: Mappings must be set for each computer that will be sending ‘Call Intercom Point’ commands, to specify which Intercom Point the call should be made from.

ხე-ტყე

Log Verbosity – აღირიცხება მხოლოდ მითითებული დონის ან უფრო მაღალი ჟურნალები. თუ არჩეულია გაფრთხილება, ჟურნალში ჩაიწერება მხოლოდ გაფრთხილება, შეცდომის და ფატალური ჟურნალები.

Child Devices

დააწკაპუნეთ .
After a short wait, a list of all of the intercoms configured in the selected Intercom Server will be added to the ჩანართი.
You can optionally add notes next the child devices.
Save and close the editor window for the new integrated Intercom System.

ღონისძიებები

შეტყობინებების მიღება
In the Integriti System Designer software:

Create and configure a CellGuard Intercom System as described in Enrolment.
Ensure that ‘Monitor Events’ is set to true and is ticked.
Select the types of events to be received in ‘Valid Events’.
Upon saving the CellGuard Intercom System, Review Messages will be automatically generated for any event that
occurs in the CellGuard Server of any event types selected in ‘Valid Events’.

Intercom messages will appear as an ‘Integration’ type with the source being the Integriti integration server and the text prepended by ‘[CellGuard Intercom]’.
e.g. “CCTVServer32: IntegritiIntegrationServer32@YOURINTEGRITISERVER”

Monitoring Intercom Point State

შენიშვნა: Only call states are currently received from the CellGuard system. All other Intercom states will be set to unknown by default.

Create and configure the CellGuard Intercom System as described in Enrolment.
Retrieve child Intercom Points from the selected server by selecting in the Intercom System.
In the selected Intercom System set ‘Monitor Intercom State’ to true and ensure is ticked.
Upon saving the Intercom System, any future call state changes for Intercom Points will begin to be monitored through both Review messages and the ‘Status’ and ‘Summary’ properties of the Intercom Points in Integriti.

INVOKING COMMANDS

Invoking Commands on CellGuard Intercom Systems
To perform a command on the CellGuard System through the Integriti software select ‘Invoke Command’ from the context menu of the Intercom System for the selected server.

From the Invoke Integrated Device Command window that appears, select the required command from the dropdown box:

Invoking Commands on CellGuard Intercom Points
To perform a command on an intercom in the CellGuard System through the Integriti software select ‘Invoke Command’ from the context menu on an Intercom Point for the selected server.

From the Device Command window that appears, select the required command from the dropdown box:

დარეკეთ ინტერკომში	Creates a call from the selected Intercom Point to the Intercom identified by ‘Destination’. Destination can either be set to the host name of the Integriti workstation to make the call to (requires Workstation to Station Number Map to be configured) or the ID of the Intercom to call.
უპასუხე ზარს	Answers the next call in the queue for the selected Intercom Point.
ზარის დასრულება	Ends the currently connected call on the selected Intercom Point.
Set Console Lock State	Locks or unlocks the selected Intercom Point. This command can only be performed on NODE elements.

Context Menu Commands	Right clicking on an Intercom Point in either Integriti System Designer or Integriti Gatekeeper allows a number of quick commands to be performed directly from the Intercom Point without having to open the ‘Invoke Command’ dialog. The following commands can be found from the right-click menu of any CellGuard Intercom Points in both the Intercom Point list and in Schematics.
Call Intercom Point	Creates a call from the selected Intercom Point to the Station Number mapped to the host name of the Integriti workstation performing the command in the Workstation to Station Number map. If no mapping is found, this command will do nothing. This command requires the Workstation to Station Number map be configured for all Integriti workstations that will perform this command.
უპასუხე ზარს	Answers the next call in the queue of the selected Intercom Point.
ზარის დასრულება	Ends the currently connected call on the selected Intercom Point.

ASSOCIATION WITH INTEGRITI ENTITIES

Associating Integriti Entities with an Intercom Point

Create and configure the CellGuard Intercom System as described in Enrolment.
Retrieve child Intercom Points from the selected Intercom Master Station by selecting in the Intercom System.
Close the editor for the Intercom System and open the editor for the Intercom Point to associate with Integriti Entities.
ქვეშ , დააწკაპუნეთ ღილაკი.
From the window that appears, select the Entities to associate with the Intercom Point.
Save and close the window.

სქემატიკა

Adding Intercom Points to Schematics

In Integriti System Designer double click on the Schematic Map to add the desired Intercom Point/s to. The editor window for the Schematic should appear.
აირჩიეთ from the bar at the top of the screen and click on the map at the desired location of the Intercom Point to add a new icon to the Schematic at the selected location. The Map Element Properties window should appear.
Select in the property to select the Intercom Point to add to the Schematic. The Find Entity window should appear.
From the left hand side of the Find Entity window select to filter the list down to show only Intercom Points.
From the list of Intercom Points available in the system, select the Intercom Point to add to the Schematic and select to close the Find Entity window.
აირჩიეთ again in the Map Element Properties window to finish adding the selected Intercom Point to the map.
Move and resize the newly added icon ( ) for the selected Intercom Point to the desired location and size.
Save and close the editor for the Schematic.

Upon being added to a Schematic, the icon for the Intercom Point will allow for the following in the Schematics Map:

If Monitoring Intercom Point State is enabled, the live state of the Intercom Point will be shown on the map through different colored icons, as well as a text description when the icon is clicked on.
Invoking one of the available commands for the selected Intercom Point.

Invoking Intercom Commands from Schematics Map
Although it is possible to invoke an Intercom Command by selecting ‘Invoke Command’ from either the context menu or the Commands section for an Intercom Point, it is also possible to expose commonly used commands on an Intercom Point for easy access.

Open the Schematics Map to edit.
Right click on the Schematics Map Element for the Intercom Point to expose commands for and select ‘Properties’.
In the ‘Additional Commands’ section of the properties window select
In the new row, give the Command a name and optionally select a custom icon to be shown next to the command.
Click on the command cell and select to open the command configuration.
From the ‘Action Type’ dropdown select ‘Invoke Integrated Device Command’.
Select in the ‘Destination’ property and select the Intercom Point associated with the selected Schematic Element.
Select the command to program and enter the necessary properties – See ‘Invoking Commands on Cell Guard Intercom Points’ for more details on available commands.
აირჩიეთ to save the configured command.
Optionally add more ‘Additional Commands’.
Once finished select and the configured commands will be available in both the context menu and the Commands section for the selected Schematics Element.

პრობლემების მოგვარება

Plugin doesn’t appear in ‘New Integrated Device’ List

Restart the Integriti Integration Server and restart any instances of Integriti System
Designer or Integriti Gatekeeper open on the computer experiencing the problem

Global Headquaters

შიდა დიაპაზონი ავსტრალია

+61 3 9780 4300
sales.au@innerrange.com

შიდა დიაპაზონი კანადა

შიდა დიაპაზონი შეერთებული შტატები

შიდა ქედი ახლო აღმოსავლეთი

+971 4 8067100
sales.me@innerrange.com

Inner Range გაერთიანებული სამეფო

+44 845
sales.uk@innerrange.com

შიდა დიაპაზონი ინდოეთი

+91 80 4070 3333
sales.india@innerrange.com

Inner Range customer service

INNERRANGE.COM

2025 წლის დეკემბერი
ამ დოკუმენტში მოცემული პროდუქტებისა და სერვისების სპეციფიკაციები და აღწერილობები სწორი იყო გამოქვეყნების დროს.
Inner Range იტოვებს უფლებას შეცვალოს სპეციფიკაციები ან გააუქმოს პროდუქტები შეტყობინების გარეშე.
საავტორო უფლება ©2025 Inner Range Pty. Ltd., ავსტრალია

დოკუმენტები / რესურსები

Inner Range Cellguard Intercom Plugin [pdf] მომხმარებლის სახელმძღვანელო
Cellguard Intercom Plugin, Cellguard Intercom Plugin, Intercom, Plugin

ცნობები

მომხმარებლის სახელმძღვანელო

Inner Range Cellguard Intercom Plugin

სპეციფიკაციები

INTERCOM CAPABILITIES