როთ-ლოგო

Roth QuickTemp Compact System

Roth-QuickTemp-Compact-System-Product

პროდუქტის სპეციფიკაციები

  • ზომები: 61 სმ x 61 სმ x 40 სმ
  • Maximum load: 2mm per meter
  • საჭიროა შეკრება

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)მტვერსასრუტით გაწმინდეთ იატაკის ქვეშა ზედაპირი. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

ფირფიტებს შორის ღარები უნდა იყოს გასწორებული.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

გამოიყენეთ გადამცემი ფირფიტები მიმწოდებელი მილებისთვის/ნაპრალების შესავსებად.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

მორიგეობით, მილი მჭიდროდ/შიდა წრესთან ახლოს დაამონტაჟეთ.

Roth-QuickTemp-Compact-System-Fig- (11)

მილების დამონტაჟება და წნევის ტესტირება.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

ინსტალაციის ნაბიჯები

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Check for stability and make adjustments if necessary.
  8. Your product is now ready for use!

ხშირად დასმული კითხვები

რა არის პროდუქტის მაქსიმალური დატვირთვის მოცულობა?

The maximum load capacity is 2mm per meter.

მჭირდება რაიმე დამატებითი ხელსაწყოები შეკრებისთვის?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

შესაძლებელია თუ არა პროდუქტის დაშლა შესანახად?

Yes, the product can be disassembled following the reverse order of the installation steps.

დოკუმენტები / რესურსები

Roth QuickTemp Compact System [pdf] ინსტალაციის სახელმძღვანელო
QuickTemp Compact System, QuickTemp, Compact System, System

ცნობები

დატოვე კომენტარი

თქვენი ელფოსტის მისამართი არ გამოქვეყნდება. მონიშნულია აუცილებელი ველები *